Menu
EUR

Case IH CX 90 tractor parts & technical data

Keep your Case IH CX 90 from the CX series running with more than 250 matching parts on this page, among them electrics, trailer couplings and lighting.

261 parts found for Case IH CX 90
Show:
SACHS Clutch plate 310, 23,4 x 28,9 mm, 10 splines sintered Case IH CX
SACHS
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sin...
€436,32 €360,60 €401,41 €331,75
You save 8%
HELLA Relays relays 12 V, 50 A, 4-pin with bracket - 175 pieces
HELLA
Version: With bracket | Nominal voltage (V): 12 | Current (A): 50 | Additional information: Pack of 175 | Number of pins: 4 | Function: With resistor ... More
Version: With bracket | Nominal voltage (V): 12 | Current (A): 50 | Ad...
€3.636,39 €3.005,28 €3.502,22 €2.894,40
You save 4%
Internal plate Hi-Lo PTO shaft 2 mm, 98 - 125 mm Case IH
Version: thickness = 2 mm inner = 98 mm outer = 125 mm More
Version: thickness = 2 mm inner = 98 mm outer = 125 mm
€33,72 €27,87 €31,02 €25,64
You save 8%
Aircon compressor 12 V, pulley-Ø 152 mm, 2 grooves
Nominal voltage (V): 12 | Fixing: EM | Connection: A2 | Refrigerant: R 134a | Suitable oil: PAG 46 | No. of grooves: 2 | For compressor: 7H15 | Pulley... More
Nominal voltage (V): 12 | Fixing: EM | Connection: A2 | Refrigerant: R...
€477,57 €394,69 €439,36 €363,11
You save 8%
Hand brake switch 1 x 6,3 mm, mounting depth 26 mm Case IH
Connection type: 1 x 6.3 mm | Version: Blade terminal Connection type: 1 x 6.3 mm Installation depth (mm): 26 | Installation depth (mm): 26 More
Connection type: 1 x 6.3 mm | Version: Blade terminal Connection type:...
€26,56 €21,95
LUK Thrust bearing 2,375 x 4 x 0,8 inch Case IH, McCormick
LUK
Dimensions (inches): 2.375"" x 4"" x 0.8"" More
Dimensions (inches): 2.375"" x 4"" x 0.8""
€104,21 €86,12 €95,87 €79,23
You save 8%
LUK Clutch plate 310TDCA 1 1/8 inch, 10 splines Case IH, McCormick
LUK
Dimensions (inches): 1 1/8"" 10 grooves More
Dimensions (inches): 1 1/8"" 10 grooves
€377,53 €312,01 €347,33 €287,05
You save 8%
MAHLE Air conditioning compressor 12 V, R 134a, pulley-Ø 152 mm, 2 grooves, Rotolock
MAHLE
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Fixing: EM | Oil quantity (ccm): 285 | Pulley Ø (mm): 152 | No. of grooves: 2 | Connection: Rotolock... More
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Fixing: EM | Oil quan...
€681,82 €563,49 €408,38 €337,50
You save 40%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
Axial joint 180 mm, M20 x 1,5 / M18 x 1,5, 32 °
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€43,18 €35,69 €39,73 €32,83
You save 8%
Axial joint 180 mm, M20 x 1,5, M18 x 1,5, 32°
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€76,07 €62,87 €69,98 €57,84
You save 8%
Track rod 500 mm, 7/8" x 16, taper 15,4 - 17,9 mm, 9/16" x 18
A: 500 mm. B: 7/8" x 16 mm. C: 15,4 - 17,9 mm. G: . D: 9/16" x 18 mm. F: 20,75 mm. More
A: 500 mm. B: 7/8" x 16 mm. C: 15,4 - 17,9 mm. G: . D: 9/16" x 18 mm. ...
€126,19 €104,29 €116,09 €95,95
You save 8%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 530 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€3.917,46 €3.237,57
Rotary switch windshield wiper, without knob, with connector
Version: For windscreen wipers, With cable and connecting plug. More
Version: For windscreen wipers, With cable and connecting plug.
€163,14 €134,83
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€842,55 €696,32
Internal plate differential catch 2,8 mm, 44 - 71,7 mm, 22 teeth
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€16,03 €13,24
External plate differential catch 1,5 mm, inner 49,2 mm, outer 85 mm
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth More
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth
€8,15 €6,74
Clutch master cylinder Case IH, New Holland
€209,21 €172,90 €192,47 €159,07
You save 8%
Rotary switch lighting 0 - 1 - 2, 5 blade terminals, Ø 17,5 mm
Connection: 5 blade terminals | Circuit: 0 - 1 - 2 | Version: For lighting 5 blade terminals, circuit: 0 - 1 - 2, Ø 17.5 mm | Mounting Ø (mm): 17,5 More
Connection: 5 blade terminals | Circuit: 0 - 1 - 2 | Version: For ligh...
€66,62 €55,06 €61,29 €50,65
You save 8%
Cut-out switch starter motor Case IH C 50 - CX 100
Version: Contact function With plug connection More
Version: Contact function With plug connection
€307,17 €253,86 €282,60 €233,55
You save 8%
Alternator 12 V / 80 A Case IH, Jungheinrich, Massey Ferguson, Renault
Form: A | Flange size (mm): 82,0 | Mounting hole Ø / R (mm): 8,2 / 86,0 | Pulley Ø (mm): - | Nominal voltage (V): 12 | Belt width (mm) / type: - | A... More
Form: A | Flange size (mm): 82,0 | Mounting hole Ø / R (mm): 8,2 / 86...
€189,21 €156,37 €174,07 €143,86
You save 8%
LED work lights floodlight 3000 lm, 40 W, 9 - 32 V, 142 x 97,5 x 54 mm
Effective luminous flux (lm): 3000 | Light colour (K): 6000 | Bulb: LED | No. of LEDs: 8 | Dimensions W x H x D (mm): 142 x 97,5 x 54 | Height (mm): 9... More
Effective luminous flux (lm): 3000 | Light colour (K): 6000 | Bulb: LE...
€91,77 €75,84 €84,43 €69,78
You save 8%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 257 mm, clockwise
€614,31 €507,69 €367,93 €304,08
You save 40%
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€33,84 €27,97 €31,13 €25,73
You save 8%
Switch clamp mounting clamp for switch
Version: Mounting clamp for switch. More
Version: Mounting clamp for switch.
€17,29 €14,29
HELLA Rocker switch on/off 12/24 V, 16 A, 2 blade connections
HELLA
Version: On/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at 24 V, 2 blade terminals. To operate: Kippbetätigung. Switching function: ohne K... More
Version: On/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at ...
€21,31 €17,61
Flasher unit electronic 12 V, 6 connections, with holder
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with bracket, with indicator light monitoring for commercial vehicles or tractors wi... More
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with...
€50,77 €41,96 €46,71 €38,60
You save 8%
MANN-FILTER Secondary air filter CF990/2, main filter C17337/2
MANN-FILTER
Suitable main filter 565C17337.2 More
Suitable main filter 565C17337.2
€37,63 €31,10
Clutch master cylinder Case IH CX 50 - 100, Massey Ferguson 6270
€263,88 €218,08 €242,77 €200,64
You save 8%
Slave cylinder Case IH CX 50 - 100
€192,45 €159,05 €177,05 €146,33
You save 8%
SACHS Thrust bearing 60 x 102 x 20,5 mm Case IH 238 - 4240
SACHS
Dimensions (mm): 60 x 102 x 20.5 More
Dimensions (mm): 60 x 102 x 20.5
€99,18 €81,97 €91,25 €75,41
You save 8%
MAHLE Starter motor 12 V, 2,8 kW, 10 teeth, 253 mm, clockwise
€462,79 €382,47 €277,18 €229,08
You save 40%
Ball joint 173 mm, M18 x 1,5, taper 19,9 - 22,3 mm
A: 173 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 19,9 mm. F: 22,3 mm. Taper: 19,9 - 22,3 mm. More
A: 173 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 19,9 mm. F: 22,3 mm. T...
€68,26 €56,41 €62,80 €51,90
You save 8%
Axial joint 176 mm, M20 x 1,5, M18 x 1,5 L, Ø 52 mm, Ø 35 mm, 25 °
A: 176 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °. Ø B: 52 mm. Ø E: 35 mm. More
A: 176 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °. Ø B: 52 mm. ...
€76,07 €62,87 €69,98 €57,84
You save 8%
Carraro Pivot bush 115 x 125 x 42 mm Carraro front axle John Deere, Case IH
Carraro
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm. More
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm.
€75,38 €62,30 €69,35 €57,31
You save 8%
Hinge cab door top left Case IH CX 50-100, MX 80C-90C
€41,92 €34,64 €38,57 €31,87
You save 8%
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,5 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawba... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€910,37 €752,37 €876,79 €724,62
You save 4%
HELLA Symbol hazard lights red
HELLA
Version: Red, hazard warning light. Colour: rot. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Warndreieck. More
Version: Red, hazard warning light. Colour: rot. To fit: HELLA Schalte...
€3,00 €2,48
Starter switch with keys without nut, 12 V, blade terminal
Version: 12 V, with blade terminal, Function:, P: parking light, 0: off, 1: consumer, 2: start, Nut, 640R44342. More
Version: 12 V, with blade terminal, Function:, P: parking light, 0: of...
€75,38 €62,30 €69,35 €57,31
You save 8%
Relays step relay main headlights 12 V / 150 W, 5-pin, with holder
Version: 12 V / 150 W, For headlights, for switching between full and dipped beam, With bracket, 5-pin, blade terminals. Width: 31,9 mm. Height: 30,5 ... More
Version: 12 V / 150 W, For headlights, for switching between full and ...
€92,85 €76,74 €85,42 €70,60
You save 8%
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
You save 21%
External plate Hi-Lo 1,5 mm, inner 98 mm, outer 125 mm Case IH
Version: thickness = 1,5 mm inner = 98 mm outer = 125 mm More
Version: thickness = 1,5 mm inner = 98 mm outer = 125 mm
€38,48 €31,80
CARLISLE Repair set clutch cylinder Case IH 3210 - 4240, CX 50 - CX 100
€40,85 €33,76 €37,58 €31,06
You save 8%
External plate PTO shaft 1,6 mm, inner 98,4 mm, outer 139,7 mm, 12 teeth
Version: Thickness: 1.6 mm Inner: 98.4 mm Outer: 139.7 mm 12 teeth More
Version: Thickness: 1.6 mm Inner: 98.4 mm Outer: 139.7 mm 12 teeth
€16,58 €13,70
External plate PTO clutch 2 mm, inner 98,4 mm, outer 139,7 mm
Version: thickness = 2 mm inner = 98,4 mm outer 139,7 mm More
Version: thickness = 2 mm inner = 98,4 mm outer 139,7 mm
€24,78 €20,48
Showing 49 - 96 of 261

Case IH CX 90 parts

On a Case IH CX 90 that spends its days on loader work, the steering joints take a beating. That is a good place to start, but this page goes further, with more than 250 parts that fit this tractor from GRANIT, HELLA, ROCKINGER, MAHLE and GRAMMER.

Steering and front axle

Ball joints and axial joints cover the steering. A potentiometer receiver for the four wheel drive axle is listed as well. Before you remove a ball joint, measure the track rod or count the turns as you unscrew it. Fitting the new joint at the same position keeps the toe close to correct until you can have it aligned. Always use a new lock nut or split pin.

Cab, switches and mirrors

The cab side is well covered. There are rocker switches, for example for the front PTO, rotary switches, relays and hazard symbols for switch faces. Cab door hinges are available, and gas struts hold the side, front or rear window open. Heavy duty telescopic mirror arms complete the list.

Before you pull the plug off a rocker switch, disconnect the battery and take a photo of the back. Every wire then goes back on the right terminal.

Engine and rear linkage

For the engine there is a starter motor, O-rings and sealing rings, such as the front crankshaft seal. Oil the lip of a new crankshaft seal lightly and drive it in squarely with a suitable drift. A seal that sits crooked leaks almost at once, and a dry lip can tear on the first start. Check the shaft for a worn groove where the old lip ran. At the rear you will find drawbars and pins for the three point linkage.

Matching parts to your CX 90

Check the type plate first. The Case IH CX series includes several models that look almost identical from the outside. After that, the reference number on the old part is the best guide. On a ball joint it is often on the housing, and on a hinge it may be stamped into the metal. Use that number to confirm the details given for the part.

The other models in the CX series each have a page with the parts that fit them: Case IH CX 70, Case IH CX 80 and Case IH CX 100. That saves time if you run more than one CX. All remaining models from the brand are listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart