Menu
EUR

Case IH CX 90 tractor parts & technical data

Keep your Case IH CX 90 from the CX series running with more than 250 matching parts on this page, among them electrics, trailer couplings and lighting.

261 parts found for Case IH CX 90
Show:
Cover upper arm Carraro front axle 642489
€125,76 €103,93 €115,70 €95,62
You save 8%
Bush 115 x 125 x 42 mm Case IH
€56,28 €46,51 €51,78 €42,79
You save 8%
Axial joint 180 mm, M20 x 1,5, M18 x 1,5 L, 25 °
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °.
€66,39 €54,87 €61,08 €50,48
You save 8%
Brake disc Ø 258 mm, 15 teeth, thickness 7,8 mm Case IH
€123,61 €102,16 €113,72 €93,98
You save 8%
Perkins Sealing ring crankshaft front Ø 62,5 x 79 x 9 mm
€42,17 €34,85 €37,89 €31,31
You save 10%
VICTOR REINZ Crankshaft seal rear Ø 133,3 x 158,7 x 12,7 mm
Radiator cap Ø 58 mm, height 25,5 mm
Neck Ø: 58 mm. Height: 25,5 mm. More
Neck Ø: 58 mm. Height: 25,5 mm.
€16,00 €13,22
Water pump with gasket Case IH, McCormick
€129,36 €106,91 €119,01 €98,36
You save 8%
Door lock, right Case IH CX 50, MX 90C, Deutz-Fahr D 4507C, Intrac 2004
Pin three-point parts IHC 3210-4240, C 50-90, CX 50-100
€39,71 €32,82 €36,53 €30,19
You save 8%
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod Ø: 10 - 22 mm. More
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unhe...
€48,90 €40,41 €44,99 €37,18
You save 8%
Walterscheid Piton Fix rail width 309 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.723,50 €1.424,38 €1.362,61 €1.126,13
You save 21%
HD-telescopic arm left Case IH CX 50, MXM 180
€280,82 €232,08 €258,35 €213,52
You save 8%
Temperature sensor 12 V, 1/2" NPT, C 50-90, CX 50-100
Version: 12 V | 1/2" NPT. Thread: 1/2" NPT. More
Version: 12 V | 1/2" NPT. Thread: 1/2" NPT.
€67,92 €56,13 €62,49 €51,64
You save 8%
Potentiometer instelpunt powerlift with connection cable
Version: For power lift set point, Connection cable with plug connection. More
Version: For power lift set point, Connection cable with plug connecti...
€539,45 €445,83
Maintenance switch air filter, differential pressure switch
Version: Differential pressure switch, 2 blade terminals. More
Version: Differential pressure switch, 2 blade terminals.
€72,56 €59,97 €66,76 €55,17
You save 8%
HELLA Bulb holder 12 V with built-in bulb
HELLA
Nominal voltage: 12 V. Additional information: • With built-in 12 V bulb • Bulb cannot be changed. More
Nominal voltage: 12 V. Additional information: • With built-in 12 V ...
€5,06 €4,18
Knob black for light switch
Version: For light switch. More
Version: For light switch.
€34,03 €28,12
Switch built-in dashboard
Version: dashboard. More
Version: dashboard.
€26,68 €22,05
Rocker switch front PTO, built-in dashboard
Version: Mounting: dashboard. More
Version: Mounting: dashboard.
€92,27 €76,26 €84,89 €70,16
You save 8%
Cobo Relays N/O-contact 12 V / 70 A, 4-pin, 6,3 mm blade terminal
Cobo
Version: 12 V / 70 A, with bracket, 4-pin, 2x 6.3 mm / 2x 9.5 mm. More
Version: 12 V / 70 A, with bracket, 4-pin, 2x 6.3 mm / 2x 9.5 mm.
€39,76 €32,86
Ball joint left for track rod 170 mm, C M18 x 1,5 L, D M18 x 1,5 L
A: 170 mm. C: M18 x 1,5 L mm. D: M18 x 1,5 L mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 170 mm. C: M18 x 1,5 L mm. D: M18 x 1,5 L mm. E: 20 mm. F: 22 mm. T...
€85,92 €71,01 €79,05 €65,33
You save 8%
Carraro Bearing bush front axle 30 x 34 x 30 mm John Deere, Massey Ferguson, Case IH
Carraro
Outer Ø: 34 mm. Inner Ø: 30 mm. Length: 30 mm. More
Outer Ø: 34 mm. Inner Ø: 30 mm. Length: 30 mm.
€9,55 €7,89
Carraro Bronze bearing Ø 38,3 x 34,9 x 34,5 mm Case IH
Carraro
Outer Ø: 38,3 mm. Inner Ø: 34,9 mm. Length: 34,5 mm. More
Outer Ø: 38,3 mm. Inner Ø: 34,9 mm. Length: 34,5 mm.
€7,10 €5,87
Sealing ring Case IH
Brake plate outer Ø 259,1 mm, inner Ø 206,2 mm, 7 mm thick, 3 teeth
Thickness: 7 mm. Number of teeth: 3. Outer Ø: 259,1 mm. Inner Ø: 206,2 mm. More
Thickness: 7 mm. Number of teeth: 3. Outer Ø: 259,1 mm. Inner Ø: 206...
€89,77 €74,19 €82,59 €68,25
You save 8%
Borg Warner Fan clutch M24 x 1,5 L, Ø 82,55 mm Case IH, McCormick
Borg Warner
Thread: M24 x 1.5 L. PCD: 82,55 mm. More
Thread: M24 x 1.5 L. PCD: 82,55 mm.
€562,25 €464,67 €472,97 €390,89
You save 16%
Radiator Case IH C 90, CX 70 - CX 100, McCormick MC 80 - MC 100
To fit as: Case IH Serie Compact (C 90), Serie CX (CX 70, 80, 90, 100), Serie MX (MX 80C, 90C), McCormick Serie MC (MC 80, 90, 100). More
To fit as: Case IH Serie Compact (C 90), Serie CX (CX 70, 80, 90, 100)...
€718,65 €593,93 €661,16 €546,41
You save 8%
Fan clutch M24 x 1,5 L, hole spacing-Ø 82 mm Case IH
Weight: 3000 g. Thread: M24 x 1.5 L. PCD: 82 mm. Equipment: 560 Drive. Menke no.: 95210. More
Weight: 3000 g. Thread: M24 x 1.5 L. PCD: 82 mm. Equipment: 560 Drive....
€260,04 €214,91 €239,24 €197,72
You save 8%
Crankshaft seal rear Ø 133,5 x 159 x 11 mm
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm. More
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm.
€23,70 €19,59
Showing 193 - 240 of 261

Case IH CX 90 parts

On a Case IH CX 90 that spends its days on loader work, the steering joints take a beating. That is a good place to start, but this page goes further, with more than 250 parts that fit this tractor from GRANIT, HELLA, ROCKINGER, MAHLE and GRAMMER.

Steering and front axle

Ball joints and axial joints cover the steering. A potentiometer receiver for the four wheel drive axle is listed as well. Before you remove a ball joint, measure the track rod or count the turns as you unscrew it. Fitting the new joint at the same position keeps the toe close to correct until you can have it aligned. Always use a new lock nut or split pin.

Cab, switches and mirrors

The cab side is well covered. There are rocker switches, for example for the front PTO, rotary switches, relays and hazard symbols for switch faces. Cab door hinges are available, and gas struts hold the side, front or rear window open. Heavy duty telescopic mirror arms complete the list.

Before you pull the plug off a rocker switch, disconnect the battery and take a photo of the back. Every wire then goes back on the right terminal.

Engine and rear linkage

For the engine there is a starter motor, O-rings and sealing rings, such as the front crankshaft seal. Oil the lip of a new crankshaft seal lightly and drive it in squarely with a suitable drift. A seal that sits crooked leaks almost at once, and a dry lip can tear on the first start. Check the shaft for a worn groove where the old lip ran. At the rear you will find drawbars and pins for the three point linkage.

Matching parts to your CX 90

Check the type plate first. The Case IH CX series includes several models that look almost identical from the outside. After that, the reference number on the old part is the best guide. On a ball joint it is often on the housing, and on a hinge it may be stamped into the metal. Use that number to confirm the details given for the part.

The other models in the CX series each have a page with the parts that fit them: Case IH CX 70, Case IH CX 80 and Case IH CX 100. That saves time if you run more than one CX. All remaining models from the brand are listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart