Menu
EUR

Case IH Magnum 310 tractor parts & technical data

With more than 250 parts for the Case IH Magnum 310, there is no need to look far. Trailer couplings, electrics and steering parts are sorted by group.

273 parts found for Case IH Magnum 310
Show:
Internal plate powershift 2 mm, 98,5 - 141 mm, 48 teeth Case IH
Version: Thickness: 2 mm Inner: 98.5 mm Outer: 141 mm 48 splines More
Version: Thickness: 2 mm Inner: 98.5 mm Outer: 141 mm 48 splines
€38,29 €31,64
MAHLE Aircon compressor 12 V, Ø 152 mm, 8 grooves, Rotolock
MAHLE
Connection: Rotolock | Reference no.: ACP 1066 000S | Oil quantity (ccm): 285 | Additional information: With sealing ring | No. of grooves: 8 | Suitab... More
Connection: Rotolock | Reference no.: ACP 1066 000S | Oil quantity (cc...
€673,69 €556,77 €403,50 €333,48
You save 40%
Elring Crankshaft seal rear 130 x 155 x 16 mm, PTFE / ACM
Elring
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylic rubber) More
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylic rubber)
€56,94 €47,06 €52,38 €43,29
You save 8%
Steering cylinder left hydraulic steering Case IH, New Holland
€1.321,12 €1.091,83 €1.215,43 €1.004,49
You save 8%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 20 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 68358. More
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Load cap...
€1.871,23 €1.546,47 €1.491,75 €1.232,85
You save 20%
Walterscheid Ball hitch K80 330 / 20 / 30 mm, 97,1 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. D-value: 97,1 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. D-value:...
€1.960,87 €1.620,55 €1.600,28 €1.322,55
You save 18%
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Scharmüller
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Colour: Black. Overhang: 155 mm. Description: Height adjustable wit... More
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-val...
€996,85 €823,84 €983,19 €812,56
You save 1%
Injection line New Holland series T8, T9, Case IH Magnum
€55,99 €46,27 €51,51 €42,57
You save 8%
GRAMMER Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
GRAMMER
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Yes. Track gauge: 260 mm. Se... More
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholst...
€7.096,01 €5.864,47 €6.578,33 €5.436,64
You save 7%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.504,05 €1.243,02 €1.158,85 €957,72
You save 23%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.070,65 €884,83 €1.013,17 €837,33
You save 5%
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
You save 21%
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
You save 21%
SANDEN Aircon compressor 12 V, Ø 152 mm, 8 grooves Case IH, New Holland
SANDEN
Refrigerant: R 134a | Suitable oil: SP 15 | Nominal voltage (V): 12 | Pulley Ø (mm): 152 | No. of grooves: 8 | Fixing: DM | Oil quantity (ccm): 285 More
Refrigerant: R 134a | Suitable oil: SP 15 | Nominal voltage (V): 12 | ...
€667,26 €551,45 €613,88 €507,34
You save 8%
External plate powershift 1 mm, inner 107 mm, outer 157,5 mm, 6 teeth
Version: thickness = 1 mm inner = 107 mm outer = 157,5 mm 6 teeth More
Version: thickness = 1 mm inner = 107 mm outer = 157,5 mm 6 teeth
€12,09 €9,99
Aircon compressor 12 V, pulley-Ø 152 mm, 8 grooves Case IH, New Holland
Fixing: DM | Refrigerant: R 134a | For compressor: SD7H15 | Oil quantity (ccm): 285 | Nominal voltage (V): 12 | Pulley Ø (mm): 152 | Suitable oil: PA... More
Fixing: DM | Refrigerant: R 134a | For compressor: SD7H15 | Oil quanti...
€544,76 €450,21 €501,18 €414,20
You save 8%
LUK Torsion damper Case IH Magnum 210 - 380, Steiger 370, Quadtrac 370
€846,90 €699,92 €779,15 €643,92
You save 8%
BOSCH Fuel pre-filter line filter D 48 mm, H 117,5 mm, connection 6/7,2 mm
BOSCH
C (mm): 42 | H (mm): 117,5 | Additional information: Typformel: F3169 | D (mm): 48 | F: 6/7,2 | Version: Leitungsfilter | G (mm): 6/7,2 More
C (mm): 42 | H (mm): 117,5 | Additional information: Typformel: F3169 ...
€13,18 €10,89
Mirror glass unheated 12 V, bending radius 2000 mm, left / right
Radius of curvature (mm): 2000 | Volts: 12 | Installation location: rechts / links | Version: unbeheizt More
Radius of curvature (mm): 2000 | Volts: 12 | Installation location: re...
€73,40 €60,66 €67,53 €55,81
You save 8%
Gasket oliefilterflens Case IH
€42,31 €34,97 €38,93 €32,17
You save 8%
Tank cap reservoir thread 57 mm
Version: Thread 57 mm, For expansion tank. More
Version: Thread 57 mm, For expansion tank.
€22,95 €18,97
Optibelt Multi-rib belt John Deere 6100-6600, 6506, chopper 7400-7700
€78,54 €64,91 €72,26 €59,72
You save 8%
Optibelt Multi-rib belt 8 ribs John Deere, Case IH
€78,81 €65,13 €72,51 €59,92
You save 8%
Turbocharger Case IH Magnum 225-335, New Holland T8010-T8050
€2.774,96 €2.293,36 €2.659,28 €2.197,75
You save 4%
Borg Warner Fan clutch Twin Flow or 50 km/h Case IH, New Holland
€1.086,37 €897,83 €1.038,48 €858,25
You save 4%
Injection line Case IH, New Holland Series T8-T9
€41,00 €33,88 €37,72 €31,17
You save 8%
Injection line New Holland T8, T9, Case IH Magnum, Quadtrac
Designation: For 38017301. More
Designation: For 38017301.
€57,10 €47,19 €52,53 €43,41
You save 8%
Tank cap engine cooling thread 52 mm
Version: Thread: 52 mm. More
Version: Thread: 52 mm.
€34,20 €28,26
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€3.038,64 €2.511,27
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
You save 8%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
ROCKINGER Clutch carrier 390 mm, 2000 kg, black
ROCKINGER
Colour: Black. Load capacity: 2000 kg. More
Colour: Black. Load capacity: 2000 kg.
€782,96 €647,07 €754,06 €623,19
You save 4%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€29,49 €24,37
Sensor hijs-encoder hydraulics
Version: Lifting unit sensor. More
Version: Lifting unit sensor.
€247,02 €204,15 €227,26 €187,82
You save 8%
Rotary switch windshield wiper, without knob, with connector
Version: For windscreen wipers, With cable and connecting plug. More
Version: For windscreen wipers, With cable and connecting plug.
€538,10 €444,71 €495,05 €409,13
You save 8%
Rocker switch rear lift lifting and lowering
Version: (Rear operation) lifting and lowering. More
Version: (Rear operation) lifting and lowering.
€80,49 €66,52 €74,05 €61,20
You save 8%
Step 305 mm Case IH, Steyr, New Holland
Tractor types: Case IH Puma 115, 125, 130, 130 CVX, 140, 145, 145 CVX, 155, 160, 160 CVX More
Tractor types: Case IH Puma 115, 125, 130, 130 CVX, 140, 145, 145 CVX,...
€51,57 €42,62 €47,44 €39,21
You save 8%
MAHLE Alternator 14 V, 200 A, flange 101 mm Case IH, New Holland
MAHLE
Charging current (A): 200 | Direction of rotation: ↻ | Flange size (mm): 101.0 | Installation angle (°): 0 | Nominal values (V / A): 14 / 200 | Nom... More
Charging current (A): 200 | Direction of rotation: ↻ | Flange size (...
€669,75 €553,51 €601,72 €497,29
You save 10%
Seal kit hydraulic steering Case IH, New Holland Series T8
€97,31 €80,42 €89,53 €73,99
You save 8%
Tie rod 513 mm, M22 x 1,5, M38 x 1,5
A: 513 mm. C: M22 x 1,5 mm. D: M38 x 1,5 mm. E: 28 mm. F: 32,9 mm. Taper: 28 - 32,9 mm. More
A: 513 mm. C: M22 x 1,5 mm. D: M38 x 1,5 mm. E: 28 mm. F: 32,9 mm. Tap...
€454,12 €375,31 €417,79 €345,28
You save 8%
Brake disc Ø 305 mm, 18 teeth, 180 x 130 mm, thickness 5 mm Case IH
GRAMMER Seat Maximo Professional MSG95AL/731, 530 mm
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€2.506,09 €2.071,15
Crankshaft seal for Ø 71,77 x 93,2 x 24,8 mm Case IH, New Holland
Outer Ø: 93,2 mm. Width: 24,8 mm. Inner Ø: 71,77 mm. More
Outer Ø: 93,2 mm. Width: 24,8 mm. Inner Ø: 71,77 mm.
€225,75 €186,57 €207,69 €171,64
You save 8%
Showing 97 - 144 of 273

Case IH Magnum 310 parts for hitch, fuel system and seat

The Magnum 310 is made for long days under heavy draught, and the parts on this page follow from that. A large share covers the rear hitch, the fuel side of the engine and the driver's seat. In total there are more than 250 parts for this tractor, made by GRANIT and by brands such as ROCKINGER, Scharmüller, Walterscheid and GRAMMER.

A hitch you can configure

On a Magnum the coupling point works like a modular system. There are automatic drawbars, Piton Fix rails and adapter plates, and each must match the rail width and the bolt hole pattern of the plate on the tractor. Measure both before you choose, and you can switch between a drawbar for the trailer and a fixed pin for a heavy load without replacing the whole assembly. Connector heads and air hoses for trailer air brakes are also listed.

Engine and fuel

The engine section includes injection lines, seal sets, the gasket for the turbocharger oil return line and seals for the feed pump. Fuel system work is all about cleanliness. Clean around a union before loosening it and cap open lines straight away. An injection line that has been bent or tightened several times should not be refitted, because the cone at its end deforms when tightened and will not seal reliably again. Check which cylinder a line belongs to as well, since each one has its own shape.

For electrics and the auxiliary drive there are alternators, multi-rib belts and relays, including changeover relays. A multi-rib belt that is fraying at the edge or shows cracks across the ribs is better replaced in the workshop than in the field.

Seat and cab

The cab section lists air suspension seats from the GRAMMER Maximo line and PROBOSS seats with seat heating, together with tank caps, among them one for the cooling system.

Ordering the right part for your Magnum 310

The Magnum 310 is part of the Case IH Magnum series. Confirm the model on the type plate first. The reference number on the old part then settles what fits.

For every other tractor of the brand, from the smaller series to other Magnum models, head to Case IH parts, choose the type shown on your type plate and you will land on the page with the matching parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart