Menu
EUR

Case IH Magnum 310 tractor parts & technical data

With more than 250 parts for the Case IH Magnum 310, there is no need to look far. Trailer couplings, electrics and steering parts are sorted by group.

273 parts found for Case IH Magnum 310
Show:
Wabco Trailer control valve 0 bar activation, 4 bar final pressure, 5,5 m³ Case IH
Wabco
Set pressure (bar): 0 | Displacement (m³): 5,5 | End pressure (bar): 4 More
Set pressure (bar): 0 | Displacement (m³): 5,5 | End pressure (bar):
€1.675,52 €1.384,73 €1.605,67 €1.327,00
You save 4%
AKS-Dasis Potentiometer airco 3 link steps Case IH CX 50 - 100
AKS-Dasis
Equipment: 3 switching stages More
Equipment: 3 switching stages
€55,33 €45,73 €50,90 €42,07
You save 8%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 238 g
Connection thread A: # 8, 1/2"" O-ring | Connection thread E: # 6, 3/8"" O-ring | Equipment: O-ring | Weight (g): 238 More
Connection thread A: # 8, 1/2"" O-ring | Connection thread E: # 6, 3/8...
€57,16 €47,24 €52,59 €43,46
You save 8%
GRAMMER Tractor seat Maximo Dynamic Plus 565 mm Case IH, Steyr, New Holland
GRAMMER
Length (mm): 648 | - Storage pocket - APS: automatic positioning system - Left armrest, 80 x 380 mm, tilt adjustable - Swivel adaptor 7.5° left/15° ... More
Length (mm): 648 | - Storage pocket - APS: automatic positioning syste...
€5.221,00 €4.314,88 €4.853,32 €4.011,01
You save 7%
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.324,09 €1.094,29
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Description: Manual ball hitch with height-adju... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.285,58 €1.062,46 €990,51 €818,61
You save 23%
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€842,55 €696,32
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
€2.805,57 €2.318,65 €2.211,65 €1.827,81
You save 21%
Reflector round red Ø 90 mm, M5, bolted
Material: Plastic | Additional information: External thread (M5) | Hole Ø (mm): M5 | Mounting type: Bolted | Form: Round | Total Ø (mm): 90 | Menke ... More
Material: Plastic | Additional information: External thread (M5) | Hol...
€7,98 €6,59
Internal plate main connection 2,9 mm, 162 - 229 mm, 39 teeth
Version: thickness = 2,9 mm inner = 162 mm outer = 229 mm 39 teeth More
Version: thickness = 2,9 mm inner = 162 mm outer = 229 mm 39 teeth
€37,90 €31,32 €34,87 €28,82
You save 8%
MAHLE Alternator 14 V / 175 A, flange 101 mm, form A Case IH, New Holland
MAHLE
Pulley Ø (mm): - | Installation angle (°): 0 | Nominal values (V / A): 14 / 175 | Mounting L / d / R (mm): 101,0 / 13,2 / 99,0 | Mounting hole Ø / ... More
Pulley Ø (mm): - | Installation angle (°): 0 | Nominal values (V / A...
€708,63 €585,64 €636,64 €526,15
You save 10%
Wabco 3/2 solenoid valve beluchtend standard open NW 4 mm, 13 bar, 12 V
€478,10 €395,12 €439,85 €363,51
You save 8%
Wabco Trailer control valve with drukbegrenzing without lever 8 bar, M22 x 1,5
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€484,47 €400,39 €445,71 €368,36
You save 8%
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimensions (mm): - | Material: Steel More
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ri...
€65,38 €54,03 €60,15 €49,71
You save 8%
Rocker switch rear lift lifting and lowering
Version: (Rear operation) lifting and lowering More
Version: (Rear operation) lifting and lowering
€80,49 €66,52 €74,05 €61,20
You save 8%
Hand brake switch 1 x 6,3 mm, mounting depth 26 mm Case IH
Connection type: 1 x 6.3 mm | Version: Blade terminal Connection type: 1 x 6.3 mm Installation depth (mm): 26 | Installation depth (mm): 26 More
Connection type: 1 x 6.3 mm | Version: Blade terminal Connection type:...
€26,56 €21,95
Starter motor 12V 5,0 kW, 10 teeth clockwise, Ø 92 mm
€511,38 €422,63 €470,47 €388,82
You save 8%
Universal joint 35 x 95 mm, maintenance-free
A: 35 mm. B: 95 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 35 mm. B: 95 mm. Universal joint size: . Lubrication system: Mainte...
€150,86 €124,68 €138,79 €114,70
You save 8%
Brake disc hand brake Case IH Magnum 7220 Pro - 7250 Pro
€123,61 €102,16 €113,72 €93,98
You save 8%
ROCKINGER Piton Fix rail width 390 mm, locking pin Ø 25 mm, 4000 kg, 98,1 kN
ROCKINGER
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 98,1 kN. Load capacity: 4 t. More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.728,55 €1.428,55 €1.381,82 €1.142,00
You save 20%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
MAHLE Alternator 14 V / 175 A, flange 101 mm, with dust protection Case IH, New Holland
MAHLE
Flange size (mm): 101.0 | Mounting hole Ø / R (mm): 13.2 / 99.0 | Belt width (mm) / type: - | Form: A | Nominal values (V / A): 14 / 175 | Charging c... More
Flange size (mm): 101.0 | Mounting hole Ø / R (mm): 13.2 / 99.0 | Bel...
€1.010,66 €835,26 €908,00 €750,41
You save 10%
Alternator 14 V / 175 A, flange 101 mm Case IH, New Holland
Direction of rotation: ↻ | Form: A | Installation angle (°): 0 | Mounting L / d / R (mm): 101,0 / 13,1 / 99,0 | Nominal values (V / A): 14 / 175 | ... More
Direction of rotation: ↻ | Form: A | Installation angle (°): 0 | Mo...
€597,28 €493,62 €549,50 €454,13
You save 8%
CBM Hydraulischer Oberlenker 3/32-3/32, 681-856 mm, stroke 175 mm
CBM
Top link type: hydraulic | Stroke (mm): 175 | A cat.: 3 / 32 | B cat.: 3 / 32 | G (mm): 46 | F (mm): 681 / 856 | Cylinder Ø inner E (mm): 90 / 110 | ... More
Top link type: hydraulic | Stroke (mm): 175 | A cat.: 3 / 32 | B cat.:...
€1.053,19 €870,41 €968,93 €800,77
You save 8%
Alternator 14 V / 200 A, flange 2 x 56 mm
Installation angle (°): l 60 | Direction of rotation: ↻ | Belt tension hole Ø / R (mm): 10,5 / 90,0 | Form: B | Mounting hole Ø / R (mm): 10,5 / ... More
Installation angle (°): l 60 | Direction of rotation: ↻ | Belt tens...
€293,61 €242,65 €270,12 €223,24
You save 8%
Vitesco NOX sensor M20 x 1,5, 615 mm, 12 / 24 V Case IH, New Holland, Steyr
€840,94 €694,99 €773,66 €639,39
You save 8%
LED work lights floodlight 3000 lm, 40 W, 9 - 32 V, 142 x 97,5 x 54 mm
Effective luminous flux (lm): 3000 | Light colour (K): 6000 | Bulb: LED | No. of LEDs: 8 | Dimensions W x H x D (mm): 142 x 97,5 x 54 | Height (mm): 9... More
Effective luminous flux (lm): 3000 | Light colour (K): 6000 | Bulb: LE...
€91,77 €75,84 €84,43 €69,78
You save 8%
MAHLE Starter motor 12 V, 4,2 kW, 10 teeth clockwise, 273 mm, Ø 92 mm
€611,17 €505,10 €366,06 €302,53
You save 40%
Thermostat 85 °C Case IH, New Holland
€102,21 €84,47 €94,03 €77,71
You save 8%
Sensor AdBlue-quality Case IH, Steyr, New Holland
Description: For AdBlue quality. More
Description: For AdBlue quality.
€923,71 €763,40
GRAMMER Tractor seat Maximo Comfort Plus Case CVX, Steyr, New Holland
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€2.247,41 €1.857,36
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€33,84 €27,97 €31,13 €25,73
You save 8%
Switch clamp mounting clamp for switch
Version: Mounting clamp for switch. More
Version: Mounting clamp for switch.
€17,29 €14,29
Rotary switch fan, without knob, with cable and plug
Version: For blower, With cable and connecting plug. More
Version: For blower, With cable and connecting plug.
€281,57 €232,70 €259,04 €214,09
You save 8%
Flasher unit electronic 12 V, 6 connections, with holder
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with bracket, with indicator light monitoring for commercial vehicles or tractors wi... More
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with...
€50,77 €41,96 €46,71 €38,60
You save 8%
Walterscheid Adapter plate 330 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Central hole (mm): 95 | Hole (mm): M21 | Load capacity (kg): 2800 | Hole pattern (mm): 160 x 100 | Detent pin Ø (mm): 20 | D-value (kN): 89,3 | Descr... More
Central hole (mm): 95 | Hole (mm): M21 | Load capacity (kg): 2800 | Ho...
€963,39 €796,19 €761,66 €629,48
You save 21%
Internal plate 4WD-clutch 2 mm, 98,5 - 141 mm Case IH
Version: thickness = 2 mm inner = 98,5 mm outer = 141 mm More
Version: thickness = 2 mm inner = 98,5 mm outer = 141 mm
€39,72 €32,83 €36,54 €30,20
You save 8%
External plate clutch 2,3 mm, inner 173 mm, outer 224 mm, 8 teeth
Thickness (mm): 2,3 | Outer Ø (mm): 224 | Inner Ø (mm): 173 | Version: thickness = 2,3 mm inner = 173 mm outer = 244 mm 8 teeth More
Thickness (mm): 2,3 | Outer Ø (mm): 224 | Inner Ø (mm): 173 | Versio...
€39,08 €32,30 €35,95 €29,71
You save 8%
Steering cylinder Case IH Magnum 235 - 370, New Holland T8.275 - 435
€552,53 €456,64 €508,33 €420,11
You save 8%
CBM Hydraulic top link cat. 4/36 - 4/45, 700 - 915 mm, stroke 215 mm
CBM
Stroke (mm): 215 | F (mm): 700 / 915 | Type: Clevis joint/clevis joint | Cylinder Ø inner E (mm): 90 / 110 | Piston rod Ø D (mm): 40 | B cat.: 4 / 4... More
Stroke (mm): 215 | F (mm): 700 / 915 | Type: Clevis joint/clevis joint...
€1.300,51 €1.074,80 €1.196,47 €988,82
You save 8%
MAHLE Alternator 14 V / 150 A, flange 101 mm Case IH, Laverda, New Holland
MAHLE
Nominal values (V / A): 14 / 150 | Pulley Ø (mm): - | Charging current (A): 150 | Mounting L / d / R (mm): 101.0 / 13.2 / 99.0 | Form: A | Installati... More
Nominal values (V / A): 14 / 150 | Pulley Ø (mm): - | Charging curren...
€566,08 €467,83 €339,04 €280,20
You save 40%
Wabco Pressure limiting valve 5,3 bar, M22 x 1,5 Case IH, New Holland
€354,80 €293,22 €340,01 €281,00
You save 4%
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M12 x 1,5, standard open
€353,16 €291,87 €324,91 €268,52
You save 8%
Showing 49 - 96 of 273

Case IH Magnum 310 parts for hitch, fuel system and seat

The Magnum 310 is made for long days under heavy draught, and the parts on this page follow from that. A large share covers the rear hitch, the fuel side of the engine and the driver's seat. In total there are more than 250 parts for this tractor, made by GRANIT and by brands such as ROCKINGER, Scharmüller, Walterscheid and GRAMMER.

A hitch you can configure

On a Magnum the coupling point works like a modular system. There are automatic drawbars, Piton Fix rails and adapter plates, and each must match the rail width and the bolt hole pattern of the plate on the tractor. Measure both before you choose, and you can switch between a drawbar for the trailer and a fixed pin for a heavy load without replacing the whole assembly. Connector heads and air hoses for trailer air brakes are also listed.

Engine and fuel

The engine section includes injection lines, seal sets, the gasket for the turbocharger oil return line and seals for the feed pump. Fuel system work is all about cleanliness. Clean around a union before loosening it and cap open lines straight away. An injection line that has been bent or tightened several times should not be refitted, because the cone at its end deforms when tightened and will not seal reliably again. Check which cylinder a line belongs to as well, since each one has its own shape.

For electrics and the auxiliary drive there are alternators, multi-rib belts and relays, including changeover relays. A multi-rib belt that is fraying at the edge or shows cracks across the ribs is better replaced in the workshop than in the field.

Seat and cab

The cab section lists air suspension seats from the GRAMMER Maximo line and PROBOSS seats with seat heating, together with tank caps, among them one for the cooling system.

Ordering the right part for your Magnum 310

The Magnum 310 is part of the Case IH Magnum series. Confirm the model on the type plate first. The reference number on the old part then settles what fits.

For every other tractor of the brand, from the smaller series to other Magnum models, head to Case IH parts, choose the type shown on your type plate and you will land on the page with the matching parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart