Menu
EUR

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

555 parts found for John Deere 1550
Show:
Bracket left
€53,68 €44,36 €48,55 €40,12
You save 10%
GRANIT Bracket right
€56,09 €46,36 €50,70 €41,90
You save 10%
HELLA Replacement key metal battery master switch
HELLA
Version: For main battery switch. More
Version: For main battery switch.
€50,41 €41,66
BOSCH Flasher unit 12 V, 2+1+1 (8) x 21 W, 6 connections, lip upper
BOSCH
Version: 12 V / 2 + 1 + 1(8) x 21 W, Lug at top, 1 hole Ø 6.4 mm, With hazard warning light function. Fig.: 3E. Vehicle makes: Huerlimann, John Deere... More
Version: 12 V / 2 + 1 + 1(8) x 21 W, Lug at top, 1 hole Ø 6.4 mm, Wit...
€98,61 €81,50 €87,20 €72,07
You save 12%
Temperature sensor 12 V, standard thread 1/2" NPT
Version: Thread: 1/2" NPT. Thread: 1/2" NPT. Temperature: - °C. More
Version: Thread: 1/2" NPT. Thread: 1/2" NPT. Temperature: - °C.
€47,51 €39,26 €42,95 €35,50
You save 10%
Centa Elastic clutch size 25 John Deere 1750-8400
Centa
To fit as: John Deere 3640, 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850, 3050, 3350, 3650 More
To fit as: John Deere 3640, 1550, 1750, 1850, 1950, 2250, 2450, 2650, ...
€404,97 €334,69 €384,70 €317,93
You save 5%
GRANIT Silencer vertical 775 mm, inner Ø 62 mm, exhaust Ø 48 mm
GRANIT
To fit as: John Deere 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630, 840, 940, 1040, 1140, 1350, 1550, 1750, 1850, 1850N More
To fit as: John Deere 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630...
€122,43 €101,18 €110,75 €91,53
You save 10%
GRANIT Seal feed pump John Deere Engine 920-6359
GRANIT
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 840, 940, 1040, 1140, 18... More
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 83...
€2,03 €1,68
Drive shaft 820 mm John Deere 1550 - 1950
€733,87 €606,50 €697,15 €576,16
You save 5%
LUK Clutch plate 250TZFN 22,5 x 26 mm, 15 splines John Deere
LUK
Dimensions (mm): 22.5 x 26 15 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 22.5 x 26 15 grooves | Material specifications: Organ...
€266,44 €220,20 €253,10 €209,17
You save 5%
MAHLE Alternator 14 V / 95 A, pulley-Ø 80 mm, form B John Deere, Renault
MAHLE
Nominal voltage (V): 14 | Additional information: Compact alternator, dust-tight | Installation angle (°): r 10 | Mounting hole Ø / R (mm): 8,2 / 86... More
Nominal voltage (V): 14 | Additional information: Compact alternator, ...
€258,84 €213,92 €161,75 €133,68
You save 38%
MAHLE Alternator 14 V / 55 A, flange 56 mm, pulley-Ø 87 mm, form B
MAHLE
Flange size (mm): 56,0 | Additional information: Dust-tight | Installation angle (°): 0 | Belt width (mm) / type: 15,2 | Nominal values (V / A): 14 /... More
Flange size (mm): 56,0 | Additional information: Dust-tight | Installa...
€224,27 €185,35 €140,15 €115,83
You save 38%
GRANIT Alternator 14 V / 35 A, flange 56 mm, pulley Ø 68 mm, W-connection
GRANIT
Additional information: with W connection | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Installation angle (°): l 60 | Charging current (A): 35 | Fo... More
Additional information: with W connection | Mounting L / d / R (mm): 5...
€117,04 €96,73 €111,15 €91,86
You save 5%
GRANIT External plate thickness 1,35 mm, inner 99 mm, outer 155 mm
GRANIT
Version: thickness = 1,35 mm inner = 99 mm outer = 155 mm More
Version: thickness = 1,35 mm inner = 99 mm outer = 155 mm
€45,06 €37,24 €42,80 €35,37
You save 5%
GRANIT External plate thickness 2,3 mm, inner 168 mm, outer 195 mm, 6 teeth
GRANIT
Version: thickness = 2,3 mm inner = 168 mm outer = 195 mm 6 teeth More
Version: thickness = 2,3 mm inner = 168 mm outer = 195 mm 6 teeth
€32,97 €27,25 €31,30 €25,87
You save 5%
LUK Clutch plate 295TZFA 22,3 x 25,8 mm, 15 splines, John Deere
LUK
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Org...
€404,36 €334,18 €384,10 €317,44
You save 5%
GRANIT Single clutch GM 320 N 35 x 38 mm, 23 splines John Deere 840 - 2650
GRANIT
Flywheel dimension (mm): 21,6 | Additional information: Made in Germany | Dimensions (mm): 35 x 38 23 grooves More
Flywheel dimension (mm): 21,6 | Additional information: Made in German...
€731,66 €604,68 €695,00 €574,38
You save 5%
GRANIT Release bearing complete with sleeve Ø 57 mm John Deere 820 - 2250
GRANIT
Dimensions (mm): Ø 57 More
Dimensions (mm): Ø 57
€171,09 €141,40 €162,50 €134,30
You save 5%
GRANIT Oil sump gasket John Deere engine 6068 Powertech 6.8 L
€30,40 €25,12
Alternator 14 V / 120 A, flange 56 mm, Case IH, John Deere, Steyr
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Additional information: Dust-tight, with fan, with W con... More
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (m...
€201,03 €166,14 €190,95 €157,81
You save 5%
Alternator 12 V / 70 A, flange 56 mm, pulley Ø 87 mm, John Deere
Pulley Ø (mm): 87 | Flange size (mm): 56,0 | Installation angle (°): 0 | Nominal voltage (V): 12 | Belt tension hole Ø / R (mm): M8 / 84,5 | Mounti... More
Pulley Ø (mm): 87 | Flange size (mm): 56,0 | Installation angle (°):...
€184,49 €152,47 €175,25 €144,83
You save 5%
HELLA Alternator 14 V, 33 A, pulley Ø 92 mm, 1 groove
HELLA
Nominal values (V / A): 14 / 33 | No. of grooves: 1 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: With pulley | Pulle... More
Nominal values (V / A): 14 / 33 | No. of grooves: 1 | Charging current...
€344,33 €284,57 €276,80 €228,76
You save 20%
FEBI Feed pump 2 hole, 45 mm, flange 30 mm, thread 10x1 John Deere
FEBI
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 840, 940, 1040, 1140, 18... More
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 83...
€55,76 €46,08 €48,48 €40,07
You save 13%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
Showing 289 - 312 of 555

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart