Menu
EUR

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

555 parts found for John Deere 1550
Show:
GRANIT Start safety switch contact function, M 16 x 1
GRANIT
Version: Contact function, Thread: M 16 x 1, With screw connection. More
Version: Contact function, Thread: M 16 x 1, With screw connection.
€37,40 €30,91
Reflector round yellow, Ø 61 mm, bore Ø 5,2 mm
Colour: Yellow | Hole Ø (mm): 5.2 | Total Ø (mm): 61 More
Colour: Yellow | Hole Ø (mm): 5.2 | Total Ø (mm): 61
€1,96 €1,62
HELLA Replacement cover orange with optics, test mark E4 6509 ECE
HELLA
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional information: • With pattern. More
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional informati...
€42,40 €35,04
GRANIT Main headlight insert left / right 12V55W H4
GRANIT
Bulb: 12V55W / H4. Nominal voltage: 12 V. Light function: With full beam, with dipped beam, without position light. More
Bulb: 12V55W / H4. Nominal voltage: 12 V. Light function: With full be...
€48,98 €40,48 €44,30 €36,61
You save 10%
GRANIT Headlight insert left / right 12V45/40WAS R2
GRANIT
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2.
€58,25 €48,14 €52,70 €43,55
You save 10%
Headlight right 12 V, 45/40 W R2, dipped beam/main beam, attachment
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation location: Right. Nominal voltage: 12 V. Light function: With dipped beam, with full be... More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation locati...
€126,89 €104,87 €120,50 €99,59
You save 5%
Headlight left 12 V, 45/40 W R2, dipped beam/main beam, attachment
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation location: Left. Nominal voltage: 12 V. Light function: With dipped beam, with full bea... More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation locati...
€133,23 €110,11 €120,50 €99,59
You save 10%
Bolt set
€9,00 €7,44
HELLA Number plate light C5W, 12 V, 5 W, built-in
HELLA
Bulb: C5W. Installation location: Rear/top/bottom. Nominal voltage: 12 V. Test mark: E1 22916 / ECE. Power consumption: 5 W. Type: Bulb. Bulbs include... More
Bulb: C5W. Installation location: Rear/top/bottom. Nominal voltage: 12...
€14,95 €12,36
GRANIT Rear light left / right, 12 V
GRANIT
Light function: Indicator light, rear light, brake light. Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Form: Rectangular. Installation location: Left/rig... More
Light function: Indicator light, rear light, brake light. Bulb: 12V21W...
€93,39 €77,18 €84,45 €69,79
You save 10%
HELLA Lens, left, 3 light functions, without number plate light
HELLA
Colour: Yellow, red. Installation location: Left. Test mark: E1 116, E1 53345, ECE. Light function: With indicator light, with brake light, with tail ... More
Colour: Yellow, red. Installation location: Left. Test mark: E1 116, E...
€22,50 €18,60
HELLA Rear light 170 x 75 x 62 mm, 12 / 24 V, indicator and brake light
HELLA
Bulb: P21W, R10W. Width: 170 mm. Form: Rectangular. Height: 75 mm. Hole spacing: 70 mm. Dimensions W x H x D: 170 x 75 x 62 mm. Depth: 62 mm. Fixing: ... More
Bulb: P21W, R10W. Width: 170 mm. Form: Rectangular. Height: 75 mm. Hol...
€41,65 €34,42
HELLA Work lamp spotlight H3, 12 / 24 V, 55 W, angular, built-in
HELLA
Bulb: H3. Connection: AMP plug. Form: Rectangular. Hole spacing: 160 mm. Material: Housing: metal. Dimensions W x H x D: 182 x 102 x 103 mm. Protectio... More
Bulb: H3. Connection: AMP plug. Form: Rectangular. Hole spacing: 160 m...
€64,30 €53,14
Sensor intake air temperature sensor With plug connection
Version: Temperature sensor, With plug connection. More
Version: Temperature sensor, With plug connection.
€29,60 €24,46
GRANIT Contact switch hand brake lever
€194,25 €160,54
GRANIT Silencer horizontal John Deere 940-1850
GRANIT
To fit as: John Deere 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630, 840, 940, 1040, 1140, 1350, 1550, 1750, 1850, 1850N More
To fit as: John Deere 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630...
€272,70 €225,37 €259,00 €214,05
You save 5%
GRANIT Tube vertical enamelled 500 mm, inner-Ø 48 mm John Deere
GRANIT
To fit as: John Deere 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630, 840, 940, 1040, 1140, 1350, 1550, 1750, 1850, 1850N More
To fit as: John Deere 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630...
€42,04 €34,74 €38,00 €31,41
You save 10%
Drive shaft 820 mm John Deere 1550 - 1950
€733,87 €606,50 €697,15 €576,16
You save 5%
MAHLE Alternator 14 V / 95 A, flange 56 mm, pulley-Ø 87 mm
MAHLE
Mounting L / d / R (mm): 56.0 / 8.2 / 86.0 | Installation angle (°): 0 | Charging current (A): 95 | Mounting hole Ø / R (mm): 8.2 / 86.0 | Additiona... More
Mounting L / d / R (mm): 56.0 / 8.2 / 86.0 | Installation angle (°): ...
€456,28 €377,09 €271,55 €224,42
You save 40%
AKS-Dasis Air conditioning compressor 12 V, pulley-Ø 146 mm, 1 groove John Deere
AKS-Dasis
Fixing: DM | Oil quantity (ccm): 230 | Pulley Ø (mm): 146 | No. of grooves: 1 | Nominal voltage (V): 12 More
Fixing: DM | Oil quantity (ccm): 230 | Pulley Ø (mm): 146 | No. of gr...
€567,93 €469,36 €539,50 €445,87
You save 5%
Denso Air conditioning compressor 12 V, R 134a, pulley Ø 140 mm, 8 grooves John Deere
Denso
Pulley Ø (mm): 140 | No. of grooves: 8 | Nominal voltage (V): 12 | Refrigerant: R 134a | Oil quantity (ccm): 230 | Suitable oil: ND-oil 8 More
Pulley Ø (mm): 140 | No. of grooves: 8 | Nominal voltage (V): 12 | Re...
€825,29 €682,06 €784,00 €647,93
You save 5%
LUK Thrust bearing with housing 49,5 x 93,5 mm John Deere 820 - 3350
LUK
Dimensions (mm): 49.5 x 93.5 More
Dimensions (mm): 49.5 x 93.5
€155,50 €128,51 €147,70 €122,07
You save 5%
LUK Single clutch 320DGVM 35 x 38 mm, 23 splines John Deere
LUK
Dimensions (mm): 35 x 38 23 grooves | Flywheel dimension (mm): 21,6 More
Dimensions (mm): 35 x 38 23 grooves | Flywheel dimension (mm): 21,6
€930,28 €768,83 €883,75 €730,37
You save 5%
Showing 385 - 408 of 555

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart