Menu
EUR

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

555 parts found for John Deere 1550
Show:
Handle steering valve John Deere series 20-50, 300, 400
€33,02 €27,29 €31,35 €25,91
You save 5%
End control unit John Deere 830-3650
€362,65 €299,71 €344,50 €284,71
You save 5%
GRANIT Valve guide John Deere 840-6920S
GRANIT Seal kit hydraulic pump John Deere 1550-5010
€184,77 €152,70 €175,50 €145,04
You save 5%
GRANIT Valve parts set hydraulic pump John Deere 840-3650
GRANIT
Menke no.: 221647. More
Menke no.: 221647.
€17,00 €14,05
Windshield frame shock absorber 130 N, 810 mm, stroke 358 mm John Deere MC 1
suitable for: Frontscheibe. Newtons: 130. A: 810 mm. B: 390 mm. C: 8 mm. D: 8 mm. Form: 3. d1: 8 mm. d2: 18 mm. Stroke: 358 mm. To fit: Windscreen. More
suitable for: Frontscheibe. Newtons: 130. A: 810 mm. B: 390 mm. C: 8 m...
€68,72 €56,79 €65,25 €53,93
You save 5%
Handle for for- and rear window John Deere Series 40-2850
€47,57 €39,31 €45,15 €37,31
You save 5%
Bush set lift arm shaft Ø 7/8 inch, 42 x 20 x 28,2 mm John Deere
Dimensions: Ø = 7/8", 42 x 20 x 28.2 mm. More
Dimensions: Ø = 7/8", 42 x 20 x 28.2 mm.
€41,93 €34,65 €39,80 €32,89
You save 5%
GRANIT O-ring master brake cylinder 25,4 x 3,5 mm John Deere
GRANIT
Dimensions: 25.4 x 3.5 mm. More
Dimensions: 25.4 x 3.5 mm.
€7,50 €6,20
GRANIT Bush for lower link shaft 21 x 49,4 x 25,4 mm John Deere 830-1850
GRANIT
Dimensions: 21 x 49.4 x 25.4 mm. More
Dimensions: 21 x 49.4 x 25.4 mm.
€56,70 €46,86 €53,85 €44,50
You save 5%
Spacer lift arm 57,7 x 67 x 6 mm John Deere series 20-50
Dimensions: 57.7 x 67 x 6 mm. More
Dimensions: 57.7 x 67 x 6 mm.
€7,65 €6,32
Seal lift arm 58 x 6,5 mm John Deere 820-2850
Dimensions: 58 x 6.5 mm. More
Dimensions: 58 x 6.5 mm.
€9,20 €7,60
GRANIT Threaded spindle 7/8" thread, length 370 mm John Deere 820-1950
GRANIT
Dimensions: Length = 370, Ø = 7/8" mm. More
Dimensions: Length = 370, Ø = 7/8" mm.
€137,70 €113,80 €130,80 €108,10
You save 5%
Washer for cab door John Deere Series 5M-6630
Reference no.: L57824. More
Reference no.: L57824.
€7,60 €6,28
Gas strut door or rear window 150 N, 505 mm Fendt, John Deere
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: door or rear screen. More
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 ...
€32,90 €27,19
GRANIT Threaded spindle M27 x 3 mm right-hand thread, cat. 2, B 175 mm, G 337 mm
GRANIT
I: M27 x 3 mm. Version: Right-hand thread. A: 25,4 mm. B: 175 mm. C: 51 mm. G: 337 mm. D: 66 mm. F: 162 mm. Category: 2 / 25.4. More
I: M27 x 3 mm. Version: Right-hand thread. A: 25,4 mm. B: 175 mm. C: 5...
€156,57 €129,40 €148,70 €122,89
You save 5%
Threaded spindle 1 1/8" UNC right-hand thread, cat. 2, B 145 mm, G 307 mm
I: 1 1/8" UNC mm. Version: Right-hand thread. A: 25,4 mm. B: 175 mm. C: 51 mm. G: 337 mm. F: 162 mm. Category: 2 / 25.4. Menke no.: 54297. More
I: 1 1/8" UNC mm. Version: Right-hand thread. A: 25,4 mm. B: 175 mm. C...
€40,54 €33,50 €36,65 €30,29
You save 10%
Threaded spindle 1 1/8" UNC left-hand thread, cat. 1, B 190 mm, G 246 mm
I: 1 1/8" UNC mm. Version: Left-hand thread. A: 19 mm. B: 190 mm. C: 44 mm. G: 246 mm. F: 56 mm. Category: 1 / 19. Menke no.: 54296. More
I: 1 1/8" UNC mm. Version: Left-hand thread. A: 19 mm. B: 190 mm. C: 4...
€39,41 €32,57 €35,65 €29,46
You save 10%
U-bracket hood John Deere 1350-2850
€60,35 €49,88 €54,60 €45,12
You save 10%
Showing 361 - 384 of 555

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart