Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

556 parts found for John Deere 1550
Show:
Drive shaft 820 mm John Deere 1550 - 1950
8%
Drive shaft 820 mm John Deere 1550 - 1950
Length (mm): 820
€765,79 €632,88 €704,53 €582,25
 
Seat mechanical suspension, PVC yellow, width 485 mm John Deere
8%
Seat mechanical suspension, PVC yellow, width 485 mm John Deere
Vorwärts- und Rückwärtseinstellung 150 mm Federweg: 80–100 mm (Paarfeder und hyd...
€148,21 €122,49 €136,35 €112,69
 
Wabco Trailer control valve 8 bar, M22 x 1,5, screw distance 117 x 117 mm
8%
Wabco
Trailer control valve 8 bar, M22 x 1,5, screw distance 117 x 117 mm
€809,41 €668,93 €744,66 €615,42
 
Wabco Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, all bores
4%
Wabco
Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, all bores
Cooling system: Air | Max. speed (rpm): 3000 | Stroke (mm): 36 | Cylinder capaci...
€2.045,95 €1.690,87 €1.960,65 €1.620,38
 
Pilot bearing 15 x 35 x 11 mm John Deere 820 - 3650
Pilot bearing 15 x 35 x 11 mm John Deere 820 - 3650
Dimensions (mm): 15 x 35 x 11
€5,83 €4,81
 
Clutch kit single, organic, flywheel 56 mm John Deere 820 - 2040
8%
Clutch kit single, organic, flywheel 56 mm John Deere 820 - 2040
Contents: Single clutch (445K82284306), organic disc (445S61686033)
€795,14 €657,14 €731,53 €604,57
 
Alternator 12 V / 70 A, flange 56 mm, pulley Ø 87 mm, John Deere
8%
Alternator 12 V / 70 A, flange 56 mm, pulley Ø 87 mm, John Deere
Pulley Ø (mm): 87 | Flange size (mm): 56,0 | Installation angle (°): 0 | Nominal...
€192,51 €159,10 €177,11 €146,37
 
As hydraulic pump John Deere 840 - 3650
8%
As hydraulic pump John Deere 840 - 3650
€125,88 €104,03 €115,81 €95,71
 
HELLA Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
23%
HELLA
Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal voltage (V)...
€429,84 €355,24 €331,19 €273,71
 
HELLA Alternator 14 V, 120 A, without belt pulley John Deere
23%
HELLA
Alternator 14 V, 120 A, without belt pulley John Deere
Additional information: Without pulley | Nominal values (V / A): 14 / 120 | Char...
€537,98 €444,61 €414,51 €342,57
 
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, 246 mm, clockwise
40%
MAHLE
Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, 246 mm, clockwise
€395,10 €326,53 €236,65 €195,58
 
Set of parts feed pump John Deere engine 3164-6359
8%
Set of parts feed pump John Deere engine 3164-6359
€52,55 €43,43 €48,35 €39,96
 
Parts set hydraulic pump John Deere 830-3650
8%
Parts set hydraulic pump John Deere 830-3650
€291,67 €241,05 €268,34 €221,77
 
Hydraulic pump 40 cm³/rpm. John Deere 1550-4030
8%
Hydraulic pump 40 cm³/rpm. John Deere 1550-4030
Output volume: 40 cc/rev.
€2.136,82 €1.765,97 €1.965,87 €1.624,69
 
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
8%
GRAMMER
Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Tra...
€1.022,73 €845,23 €940,91 €777,61
 
Replacement key lock number 14610 John Deere, Case IH
Replacement key lock number 14610 John Deere, Case IH
Locking number: 14610. Menke no.: 221631.
€21,20 €17,52
 
Battery cut-off switch knob 12 V, 100 A, 2 x M10, with key
8%
Battery cut-off switch knob 12 V, 100 A, 2 x M10, with key
Version: Rotary operation, removable key with splash protection cap Connection t...
€54,29 €44,87 €49,95 €41,28
 
Ignition switch 12 V, built-in-Ø 26 mm, with 2 keys
8%
Ignition switch 12 V, built-in-Ø 26 mm, with 2 keys
Connection: 2x flat terminals 6.3 mm and 2x double flat terminals 9.5 mm + 6.3 m...
€47,24 €39,04 €43,46 €35,92
 
LUK Clutch kit double plate connection without release bearing John Deere
8%
LUK
Clutch kit double plate connection without release bearing John Deere
Contents: Pressure plate 458228002310, clutch plate 458328006110 | Supplementary...
€1.071,76 €885,75 €986,02 €814,89
 
Clutch plate 280 22,3 x 25,8 mm, 15 splines, MCC
8%
Clutch plate 280 22,3 x 25,8 mm, 15 splines, MCC
Material specifications: MCC clutch lining | Additional information: Made in Ger...
€262,24 €216,73 €241,26 €199,39
 
Clutch plate 300 22,3 x 25,8 mm, 15 splines, torsion damper
8%
Clutch plate 300 22,3 x 25,8 mm, 15 splines, torsion damper
Dimensions (mm): 22.3 x 25.8, 15 grooves | Additional information: Made in Germa...
€295,33 €244,07 €271,70 €224,55
 
Parts set hydraulic pump John Deere 830 - 3650
8%
Parts set hydraulic pump John Deere 830 - 3650
€106,31 €87,86 €97,81 €80,83
 
Cobo Indicator switch with cable and plug John Deere 1550 - 2850
8%
Cobo
Indicator switch with cable and plug John Deere 1550 - 2850
Version: With cable + plug connection
€320,33 €264,74 €294,70 €243,56
 
Wabco Trailer control valve with drukbegrenzing 8 bar, M22 x 1,5, NW 10 mm
8%
Wabco
Trailer control valve with drukbegrenzing 8 bar, M22 x 1,5, NW 10 mm
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (mm): 10 | W...
€581,80 €480,83 €535,26 €442,36
 
KS Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
8%
KS
Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
€69,70 €57,60 €64,12 €53,00
 
Thermostat Ø 54 mm, 82 °C
Thermostat Ø 54 mm, 82 °C
Ø (mm): 54 | Temperature (°C): 82
€18,75 €15,50
 
External plate 2,3 mm, inner 99 mm, outer 143 mm, 10 teeth John Deere
External plate 2,3 mm, inner 99 mm, outer 143 mm, 10 teeth John Deere
Version: Thickness: 2.3 mm Inner: 99 mm Outer: 143 mm, 10 splines
€26,06 €21,54
 
Double clutch DoT 280 H 35 x 38 mm, 23 splines John Deere
8%
Double clutch DoT 280 H 35 x 38 mm, 23 splines John Deere
Dimensions (mm): 35 x 38, 23 grooves | Flywheel dimension (mm): 56 | Additional ...
€719,61 €594,72 €662,04 €547,14
 
Single diaphragm spring clutch 35,1 x 38,1 mm, 23 splines John Deere 840 - 2650
8%
Single diaphragm spring clutch 35,1 x 38,1 mm, 23 splines John Deere 840 - 2650
Dimensions (mm): 35.1 x 38.1, 23 grooves | Flywheel dimension (mm): 21 | Additio...
€666,36 €550,71 €613,05 €506,65
 
Oil sump gasket John Deere engine 6068 Powertech 6.8 L
Oil sump gasket John Deere engine 6068 Powertech 6.8 L
Menke no.: 221621
€31,75 €26,24
 
Prestolite Alternator 12 V, 70 A, pulley Ø 69 mm, belt 6pK
8%
Prestolite
Alternator 12 V, 70 A, pulley Ø 69 mm, belt 6pK
€252,98 €209,07 €232,74 €192,35
 
FEBI Belt tensioner John Deere 5080, 5085, 5090, 5095, 5100, 5215
61%
FEBI
Belt tensioner John Deere 5080, 5085, 5090, 5095, 5100, 5215
Belt tensioner John Deere 5080, 5085, 5090, 5095, 5100, 5215
€153,00 €126,45 €59,15 €48,88
 
FEBI Hydraulic oil filter HF35474
34%
FEBI
Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
 
MAHLE Gear reduction starter 12 V, 3,2 kW, 10 teeth clockwise, 238 mm
40%
MAHLE
Gear reduction starter 12 V, 3,2 kW, 10 teeth clockwise, 238 mm
€580,85 €480,04 €347,89 €287,51
 
Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
8%
Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€351,67 €290,64 €323,54 €267,39
 
Axial joint with stop 176 mm, M20 x 1,5, M18 x 1,5, Ø 52 mm, Ø 35 mm
8%
Axial joint with stop 176 mm, M20 x 1,5, M18 x 1,5, Ø 52 mm, Ø 35 mm
A: 176 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 25 °. Ø B: 52 mm. Ø E: 35 mm.
€74,26 €61,37 €68,32 €56,46
 
Universal joint 30 x 83 mm, 1x outer lubrication / centralised lubrication
8%
Universal joint 30 x 83 mm, 1x outer lubrication / centralised lubrication
A: 30 mm. B: 83 mm. Universal joint size: . Lubrication system: 1 x external lub...
€57,80 €47,77 €53,18 €43,95
 
Track rod 330 mm, 1 1/8" x 12, taper 23,5 - 26,5 mm, M14 x 1,5
8%
Track rod 330 mm, 1 1/8" x 12, taper 23,5 - 26,5 mm, M14 x 1,5
A: 300 - 500 mm. B: 1 1/8" x 12 mm. C: 23,5 - 26,5 mm. G: . D: M14 x 1,5 mm. E: ...
€185,59 €153,38 €170,74 €141,11
 
Brake disc Ø 306 x 4,9 mm, 12 teeth John Deere 840-2040
8%
Brake disc Ø 306 x 4,9 mm, 12 teeth John Deere 840-2040
€197,22 €162,99 €181,44 €149,95
 
GRAMMER Tractor seat Compacto Basic W MSG83/721 mechanical suspension, PVC
8%
GRAMMER
Tractor seat Compacto Basic W MSG83/721 mechanical suspension, PVC
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Tra...
€927,77 €766,75 €853,55 €705,41
 
Wiper motor with switch 12 V, 135°, M12 x 1
8%
Wiper motor with switch 12 V, 135°, M12 x 1
With integrated switch.
€127,48 €105,36 €117,28 €96,93
 
Wabco Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, luftgekühlt (air-cooled)
4%
Wabco
Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, luftgekühlt (air-cooled)
Cooling system: Air | Piston stroke (mm): 36 | Operating pressure max. (bar): 10...
€2.006,48 €1.658,25 €1.922,84 €1.589,13
 
Drive shaft 950 mm John Deere 940 - 1850
8%
Drive shaft 950 mm John Deere 940 - 1850
Length (mm): 950
€1.080,18 €892,71 €993,77 €821,29
 
Expansion valve 3/8 - 1/2 inch o-ring John Deere 1170 - 7800
8%
Expansion valve 3/8 - 1/2 inch o-ring John Deere 1170 - 7800
Connection thread A: # 8, 1/2"" O-ring | Equipment: O-ring | Connection thread E...
€69,08 €57,09 €63,55 €52,52
 
LUK Thrust bearing with housing 57,1 x 100 mm John Deere
8%
LUK
Thrust bearing with housing 57,1 x 100 mm John Deere
Dimensions (mm): 57.1 x 100
€251,14 €207,55 €231,05 €190,95
 
Clutch plate 280 22,3 x 25,8 mm, 15 splines, MCC, torsion damper
8%
Clutch plate 280 22,3 x 25,8 mm, 15 splines, MCC, torsion damper
Dimensions (mm): 22.3 x 25.8, 15 grooves | Material specifications: MCC clutch l...
€571,30 €472,15 €525,60 €434,38
 
Wabco Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
8%
Wabco
Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Opening pressur...
€257,83 €213,08 €237,20 €196,04
 
External plate thickness 1,35 mm, inner 99 mm, outer 155 mm
8%
External plate thickness 1,35 mm, inner 99 mm, outer 155 mm
Version: thickness = 1,35 mm inner = 99 mm outer = 155 mm
€47,02 €38,86 €43,26 €35,75
 
Showing 49 - 96 of 556

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart