Menu
EUR

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

555 parts found for John Deere 1550
Show:
Control lever steering valve curved John Deere 830 - 3650
€55,61 €45,96 €52,80 €43,64
You save 5%
GRANIT Drive shaft 950 mm John Deere 940 - 1850
GRANIT
Length (mm): 950 More
Length (mm): 950
€1.035,15 €855,50 €983,35 €812,69
You save 5%
Starter motor 12 V, 3,1 kW, 10 teeth, 244 mm, clockwise
€299,60 €247,60 €284,60 €235,21
You save 5%
GRANIT Ball joint 240 mm, M14 x 1,5, 20 mm, taper 16,2 - 18,7 mm
GRANIT
A: 240 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,7 mm. Taper: 16,2 - 18,7 mm. More
A: 240 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,7 mm. Taper: 1...
€74,08 €61,22 €70,35 €58,14
You save 5%
ROCKINGER Drawbar ball 80, rail width 330 mm, guide 32 mm, 4000 kg
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 105 kN. Colour: John Deere green. Description: Manual b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.203,95 €995,00 €967,95 €799,96
You save 20%
Helical gear John Deere
€95,55 €78,97 €90,75 €75,00
You save 5%
GRANIT Valve stem seal Ø 9 x 19 mm John Deere 840-4050
€11,15 €9,21
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, John Deere green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 100 kN. Colour: JD green. Technical data: Kugelkupplung... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.423,49 €1.176,44 €1.144,45 €945,83
You save 20%
HELLA Work lamp spotlight H3, 55/70 W, 12/24 V, Ø 152 x 120 mm
HELLA
Nominal voltage: 12 / 24 V. Form: Round. Dimensions W x H x D: Ø 152 x 120 mm. Light function: Far-reaching illumination. Bulb: H3. Material: Housing... More
Nominal voltage: 12 / 24 V. Form: Round. Dimensions W x H x D: Ø 152 ...
€91,00 €75,21
Brake light switch oil pressure 1/8" NPT, 2,8 - 6,3 bar, neutral position off
Version: Thread 1/8" NPT, 2.8 - 6.3 bar, normally off, make contact. More
Version: Thread 1/8" NPT, 2.8 - 6.3 bar, normally off, make contact.
€22,00 €18,18
GRANIT Wiper motor with switch 12 V, 135°, M12 x 1
GRANIT
With integrated switch. More
With integrated switch.
€128,27 €106,01 €116,00 €95,87
You save 10%
Bearing race hydraulic pump John Deere 1550 - 4960
€120,64 €99,70 €114,60 €94,71
You save 5%
GRANIT Clutch kit single, organic, flywheel 56 mm John Deere 820 - 2040
GRANIT
Contents: Single clutch (445K82284306), organic disc (445S61686033) More
Contents: Single clutch (445K82284306), organic disc (445S61686033)
€735,68 €608,00 €698,85 €577,56
You save 5%
GRANIT Alternator 14 V / 55 A, pulley-Ø 87 mm, flange 56 mm John Deere
GRANIT
Installation angle (°): 0 | Belt tension hole Ø / R (mm): M8 / 84,5 | Pulley spacing (mm): 27,0 | Form: B | Nominal values (V / A): 14 / 55 | Belt w... More
Installation angle (°): 0 | Belt tension hole Ø / R (mm): M8 / 84,5 ...
€180,39 €149,08 €171,35 €141,61
You save 5%
GRANIT Ball joint 95 mm, M18 x 1,5, M24 x 1,5, taper 20 - 22,2 mm
GRANIT
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tape...
€51,53 €42,59 €48,95 €40,45
You save 5%
GRANIT Repair set water pump John Deere 830-5410
€63,38 €52,38 €60,20 €49,75
You save 5%
GRANIT Hydraulic pump 40 cm³/rpm. John Deere 1550-4030
GRANIT
Output volume: 40 cc/rev. More
Output volume: 40 cc/rev.
€2.047,74 €1.692,35 €1.945,35 €1.607,73
You save 5%
BOSCH Brake light switch oil pressure 1/8" NPTF, 3 - 6 bar, neutral position off
BOSCH
Version: Thread 1/8", tapered, 3.0 - 6.0 bar, normally off, make contact. Switching pressure range over-pressure: 3 - 6 bar. Connection 2-pin: Blade t... More
Version: Thread 1/8", tapered, 3.0 - 6.0 bar, normally off, make conta...
€34,60 €28,60
Axial joint 176 mm, Ø 52 mm, M20 x 1,5 / M18 x 1,5
€42,76 €35,34 €40,60 €33,55
You save 5%
GRANIT Stop cable without stop 2270 / 2100 mm John Deere 940-4955
GRANIT
To fit as: John Deere 840, 940, 1030, 1130, 1530, 1630, 1830, 2130, 3030, 3130, 1040, 1140, 1640, 1840, 2040, 2140, 3040, 3340, 3640, 4240, 4440, 1350... More
To fit as: John Deere 840, 940, 1030, 1130, 1530, 1630, 1830, 2130, 30...
€24,75 €20,45
Valve head steering valve EW John Deere 830 - 3650
€381,74 €315,49 €362,65 €299,71
You save 5%
LUK Clutch kit double plate connection without release bearing John Deere
LUK
Contents: Pressure plate 458228002310, clutch plate 458328006110 | Supplementary set: Without release bearing | Connection: For vehicles with double-d... More
Contents: Pressure plate 458228002310, clutch plate 458328006110 | Sup...
€1.027,08 €848,83 €975,70 €806,36
You save 5%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€586,12 €484,40 €556,80 €460,17
You save 5%
Wabco Trailer control valve 3,5 bar, 12 bar, 2,2 m³ John Deere 1550 - 3650
Wabco
Displacement (m³): 2,2 | End pressure (bar): 12 | Set pressure (bar): 3,5 More
Displacement (m³): 2,2 | End pressure (bar): 12 | Set pressure (bar):...
€500,20 €413,39 €475,15 €392,69
You save 5%
Showing 25 - 48 of 555

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart