Menu
EUR

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

555 parts found for John Deere 1550
Show:
Bush set lift arm shaft Ø 1 1/8 inch John Deere
Dimensions: Ø = 1 1/8" mm. More
Dimensions: Ø = 1 1/8" mm.
€34,85 €28,80 €33,10 €27,36
You save 5%
GRANIT Replacement glass 271 x 191 mm, unheated, right / left John Deere SG 2
GRANIT
Dimensions: 271 x 191 mm. Version: Unheated. Installation location: Right/left. More
Dimensions: 271 x 191 mm. Version: Unheated. Installation location: Ri...
€34,90 €28,84
Cover John Deere 1550-2850
€314,72 €260,10 €298,95 €247,07
You save 5%
GRANIT Handle John Deere
GRANIT
Brand: John Deere. More
Brand: John Deere.
€8,00 €6,61
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
GRANIT Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
GRANIT
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switching function: on/off switch with silver contacts/with splash protection cap/spr... More
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switc...
€6,15 €5,08
HELLA Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
HELLA
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 135 mm. Total height: 222 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€139,80 €115,54
Headlight left / right 12 V, H4 60/55 W, dip- and main beam, built-in
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Light function: Dipped beam, full beam. Bulbs included: No. Mounting ... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€113,74 €94,00 €108,00 €89,26
You save 5%
Headlight left 12 V, H4, dipped beam, main beam, attachment
Bulb: 12V/60/55W/H4. Installation location: Left. Nominal voltage: 12 V. Light function: Dipped beam, full beam. Mounting type: Mounting. More
Bulb: 12V/60/55W/H4. Installation location: Left. Nominal voltage: 12 ...
€176,25 €145,66
HELLA Rear light left / right with hybrid technology, 12 V
HELLA
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Colour: Yellow, red. Form: Rectangular. Cable length: - m. Installation location: Left, right. Nominal volta... More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Colour: Yellow, red. Form: R...
€60,15 €49,71
Rear light 158 x 64 x 51 mm, 12 V, left, number plate light
Nominal voltage: 12 V. Installation location: Left. Bulb: P21W, R10W. Bulbs included: No. Light function: Indicator light, rear light, brake light, nu... More
Nominal voltage: 12 V. Installation location: Left. Bulb: P21W, R10W. ...
€70,90 €58,60 €64,10 €52,98
You save 10%
HELLA Indicator/position light left 95 x 85 x 54 mm, 12V21WK / R21W Claas
HELLA
Bulb: P21W, 12V5WS / C5W, 12V21WK / R21W. Colour: Yellow, white. Attachment: Front. Connection: Blade terminal. Width: 95 mm. Form: Rectangular, two s... More
Bulb: P21W, 12V5WS / C5W, 12V21WK / R21W. Colour: Yellow, white. Attac...
€57,60 €47,60
HELLA Micro relays changeover contact 12 V, 30 - 40 A, 5-pin, with holder
HELLA
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm. Function: Make contact relay (mini relay). More
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm....
€19,30 €15,95
HELLA Relays changeover contact 12 V, 30 - 40 A, with holder, 5-pin, 6,3 mm
HELLA
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm, With resistor for suppressing inductive interference voltage peaks. Colour: Bla... More
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm,...
€21,85 €18,06
HELLA Relays relays make contact 12 V / 50 A, 4-pin, with holder
HELLA
Version: • With resistor for suppressing inductive interference voltage peaks. Colour: Black. Power rating max. 12 V: 50. Protection class: 54. Swit... More
Version: • With resistor for suppressing inductive interference volt...
€20,00 €16,53
GRANIT Hose inner-Ø 5 mm, outer-Ø 12 mm, material thickness 3,5 mm - 1 meter
€6,20 €5,12
GRANIT Feed pump 2 hole, 45 mm, flange 30 mm, thread 10x1 John Deere
GRANIT
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 840, 940, 1040, 1140, 18... More
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 83...
€33,77 €27,91 €32,00 €26,45
You save 5%
GRANIT Clutch plate 280 22,3 x 25,8 mm, 15 splines, MCC, torsion damper
GRANIT
Dimensions (mm): 22.3 x 25.8, 15 grooves | Material specifications: MCC clutch lining | Additional information: Made in Germany More
Dimensions (mm): 22.3 x 25.8, 15 grooves | Material specifications: MC...
€547,49 €452,47 €520,10 €429,83
You save 5%
Cobo Indicator switch with cable and plug John Deere 1550 - 2850
Cobo
Version: With cable + plug connection More
Version: With cable + plug connection
€306,98 €253,70 €291,60 €240,99
You save 5%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, W-connection
MAHLE
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm): 56,0 | Additional information: Dust-tight, with fan, with W connection | Nomi... More
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm...
€525,90 €434,63 €313,00 €258,68
You save 40%
Wabco Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, all bores
Wabco
Cooling system: Air | Max. speed (rpm): 3000 | Stroke (mm): 36 | Cylinder capacity (cm³): 159 | Coolant: Luft | Type: 1 - cylinder | Lubrication syst... More
Cooling system: Air | Max. speed (rpm): 3000 | Stroke (mm): 36 | Cylin...
€1.960,65 €1.620,37
GRANIT Thermostat Ø 54 mm, 82 °C
GRANIT
Ø (mm): 54 | Temperature (°C): 82 More
Ø (mm): 54 | Temperature (°C): 82
€17,95 €14,83
GRANIT Internal plate 4wd 1,5 mm, inner 79,5 mm, outer 141 mm
GRANIT
Version: thickness = 1,5 mm inner = 79,5 mm outer = 141 mm More
Version: thickness = 1,5 mm inner = 79,5 mm outer = 141 mm
€42,50 €35,12 €40,35 €33,35
You save 5%
GRANIT Internal plate PTO clutch 1,6 mm, inner 92,8 mm, outer 133,2 mm
GRANIT
Version: thickness = 1,6 mm inner = 92,8 mm outer = 133,2 mm, 45 teeth More
Version: thickness = 1,6 mm inner = 92,8 mm outer = 133,2 mm, 45 teeth
€25,00 €20,66
Showing 145 - 168 of 555

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart