Menu
EUR

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

555 parts found for John Deere 1550
Show:
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, W-connection
MAHLE
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm): 56,0 | Additional information: Dust-tight, with fan, with W connection | Nomi... More
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm...
€525,90 €434,63 €313,00 €258,68
You save 40%
Wabco Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, all bores
Wabco
Cooling system: Air | Max. speed (rpm): 3000 | Stroke (mm): 36 | Cylinder capacity (cm³): 159 | Coolant: Luft | Type: 1 - cylinder | Lubrication syst... More
Cooling system: Air | Max. speed (rpm): 3000 | Stroke (mm): 36 | Cylin...
€1.960,65 €1.620,37
GRANIT Thermostat Ø 54 mm, 82 °C
GRANIT
Ø (mm): 54 | Temperature (°C): 82 More
Ø (mm): 54 | Temperature (°C): 82
€17,95 €14,83
GRANIT Internal plate 4wd 1,5 mm, inner 79,5 mm, outer 141 mm
GRANIT
Version: thickness = 1,5 mm inner = 79,5 mm outer = 141 mm More
Version: thickness = 1,5 mm inner = 79,5 mm outer = 141 mm
€42,50 €35,12 €40,35 €33,35
You save 5%
GRANIT Internal plate PTO clutch 1,6 mm, inner 92,8 mm, outer 133,2 mm
GRANIT
Version: thickness = 1,6 mm inner = 92,8 mm outer = 133,2 mm, 45 teeth More
Version: thickness = 1,6 mm inner = 92,8 mm outer = 133,2 mm, 45 teeth
€25,00 €20,66
GRANIT Internal plate Hi-Lo 1,6 mm, inner 92,8 mm, outer 133,2 mm, 45 teeth
GRANIT
Version: thickness = 1,6 mm inner = 92,8 mm outer = 133,2 mm 45 teeth More
Version: thickness = 1,6 mm inner = 92,8 mm outer = 133,2 mm 45 teeth
€39,98 €33,04 €37,95 €31,36
You save 5%
LUK Clutch plate 280TZFN 22,3 x 25,8 mm, 15 splines John Deere
LUK
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Org...
€370,50 €306,20 €351,95 €290,87
You save 5%
LUK Single clutch 330DGVM 35 x 38 mm, 23 splines John Deere 840 - 2650
LUK
Dimensions (mm): 35 x 38 23 grooves | Flywheel dimension (mm): 21 More
Dimensions (mm): 35 x 38 23 grooves | Flywheel dimension (mm): 21
€726,73 €600,60 €690,35 €570,54
You save 5%
Single clutch XN 280 35 x 38 mm, 23 splines John Deere 830 - 2250
Additional information: Made in Germany | Dimensions (mm): 35 x 38 23 grooves | Flywheel dimension (mm): 56 More
Additional information: Made in Germany | Dimensions (mm): 35 x 38 23 ...
€646,94 €534,66 €614,55 €507,89
You save 5%
Release bearing complete with sleeve Ø 49,6 mm, with ring John Deere 820 - 3350
Dimensions (mm): Ø 49.6, with ring More
Dimensions (mm): Ø 49.6, with ring
€90,02 €74,40 €85,50 €70,66
You save 5%
GRANIT Pilot bearing 15 x 35 x 11 mm John Deere 820 - 3650
GRANIT
Dimensions (mm): 15 x 35 x 11 More
Dimensions (mm): 15 x 35 x 11
€5,55 €4,59
GRANIT Alternator 14 V / 65 A, flange 52,8 mm, pulley Ø 63 mm
GRANIT
Belt width (mm) / type: PV x 8 | Form: B | Mounting L / d / R (mm): 52,8 / 8,5 / 88,25 | Nominal values (V / A): 14 / 65 | Charging current (A): 65 | ... More
Belt width (mm) / type: PV x 8 | Form: B | Mounting L / d / R (mm): 52...
€163,93 €135,48 €155,70 €128,68
You save 5%
GRANIT Alternator 14 V, 35 A, flange 56 mm, pulley Ø 68 mm, form B
GRANIT
Pulley spacing (mm): 21,0 | Mounting L / d / R (mm): 56,0 / 8,3 / - | Flange size (mm): 56,0 | Nominal voltage (V): 14 | Belt tension hole Ø / R (mm)... More
Pulley spacing (mm): 21,0 | Mounting L / d / R (mm): 56,0 / 8,3 / - | ...
€136,92 €113,16 €130,00 €107,44
You save 5%
HELLA Alternator 14 V / 65 A, pulley Ø 82 mm, 1 groove, Fendt, John Deere
HELLA
Nominal values (V / A): 14 / 65 | No. of grooves: 1 | Charging current (A): 65 | Nominal voltage (V): 14 | Additional information: With pulley | Pulle... More
Nominal values (V / A): 14 / 65 | No. of grooves: 1 | Charging current...
€368,38 €304,45 €296,15 €244,75
You save 20%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise
€480,89 €397,43 €300,50 €248,35
You save 38%
Universal joint 26,97 x 81,7 mm, maintenance-free
A: 26,97 mm. B: 81,7 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 26,97 mm. B: 81,7 mm. Universal joint size: . Lubrication system: M...
€35,88 €29,65 €34,00 €28,10
You save 5%
Track rod 148 mm, 1 1/8" x 12, taper 16 - 19 mm, M14 x 1,5
A: 370 - 670 mm. B: 1 1/8" x 12 mm. C: 16 - 19 mm. G: . D: M14 x 1,5 mm. E: 28 mm. F: 20 mm. More
A: 370 - 670 mm. B: 1 1/8" x 12 mm. C: 16 - 19 mm. G: . D: M14 x 1,5 m...
€206,95 €171,03 €196,60 €162,48
You save 5%
GRANIT Track rod 908 mm, M14 x 1,5, taper 16,2 - 18,76 mm
GRANIT
A: 908 mm. B: M14 x 1,5 mm. C: 16,2 - 18,76 mm. G: . D: M14 x 1,5 mm. E: 28 mm. F: 20,6 mm. More
A: 908 mm. B: M14 x 1,5 mm. C: 16,2 - 18,76 mm. G: . D: M14 x 1,5 mm. ...
€105,10 €86,86 €99,80 €82,48
You save 5%
Danfoss Orbitrol OSPC 125 CN John Deere Series 50-3350
Danfoss
Type: OSPC 125 CN 7 150-0179. More
Type: OSPC 125 CN 7 150-0179.
€928,78 €767,59 €882,30 €729,17
You save 5%
GRANIT Compressor John Deere, New Holland, Case IH, Fiat, Ford
€1.350,38 €1.116,02 €1.282,85 €1.060,21
You save 5%
KS Piston set, complete Ø 106,5 mm, piston pin Ø 34,93 mm, John Deere
KS
Dimensions: 3 rings, Ø 106.5 mm, Gudgeon pin Ø 34.93 x 84.4 mm, Combustion chamber Ø 58.4 mm, Combustion chamber depth 18.75 mm, Ring carrier pisto... More
Dimensions: 3 rings, Ø 106.5 mm, Gudgeon pin Ø 34.93 x 84.4 mm, Comb...
€290,99 €240,49 €276,40 €228,43
You save 5%
Showing 169 - 192 of 555

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart