Menu
EUR

John Deere 2040S tractor parts & technical data

The John Deere 2040S from the 40 series gets its own overview here, with more than 350 parts such as lighting, electrics and engine components.

371 parts found for John Deere 2040S
Show:
Brake light switch oil pressure 1/8" NPT, 2,8 - 6,3 bar, neutral position off
Brake light switch oil pressure 1/8" NPT, 2,8 - 6,3 bar, neutral position off
Version: Thread 1/8" NPT, 2.8 - 6.3 bar, normally off, make contact.
€22,98 €18,99
 
Radiator John Deere Series 40, 1640-2140
8%
Radiator John Deere Series 40, 1640-2140
To fit as: John Deere 1640, 1840, 2040, 2040 S, 2140
€591,78 €489,07 €544,44 €449,95
 
Injection nozzle John Deere 510-3350
8%
Injection nozzle John Deere 510-3350
To fit as: John Deere 510, 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630, 203...
€79,67 €65,84 €73,30 €60,58
 
LUK Single clutch 320GDVM 41,5 x 44,8 mm, 27 splines John Deere
8%
LUK
Single clutch 320GDVM 41,5 x 44,8 mm, 27 splines John Deere
Flywheel dimension (mm): 21,6 | Dimensions (mm): 41.5 x 44.8 27 grooves
€857,29 €708,50 €788,71 €651,82
 
Clutch plate 327, 25,8 x 32,1 mm, 10 splines, sintered
8%
Clutch plate 327, 25,8 x 32,1 mm, 10 splines, sintered
Dimensions (mm): 25.8 x 32.1, 10 grooves | Material specifications: Sintered clu...
€289,79 €239,50 €266,61 €220,34
 
HELLA Alternator 14 V, 70 A, pulley Ø 82 mm, 1 groove John Deere
23%
HELLA
Alternator 14 V, 70 A, pulley Ø 82 mm, 1 groove John Deere
Nominal values (V / A): 14 / 70 | No. of grooves: 1 | Charging current (A): 70 |...
€516,87 €427,17 €398,25 €329,13
 
Ball joint taper 19,9 - 22,2 mm, M18 x 1,5, M24 x 1,5, 106 mm
8%
Ball joint taper 19,9 - 22,2 mm, M18 x 1,5, M24 x 1,5, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,2 mm. Taper: 19,9...
€38,19 €31,56 €35,13 €29,04
 
Track rod 1100 mm, M24 x 1,5, taper 19,9 - 22,25 mm
8%
Track rod 1100 mm, M24 x 1,5, taper 19,9 - 22,25 mm
A: 1100 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,25 mm. Taper: 19,9 - 22,25 mm. Tu...
€110,08 €90,98 €101,27 €83,70
 
Track rod 1345 mm, M18 x 1,5, 20 - 22 mm, 32 mm
8%
Track rod 1345 mm, M18 x 1,5, 20 - 22 mm, 32 mm
A: 1345 mm. B: M18 x 1,5 mm. C: 20 - 22 mm. G: . D: M24 x 1,5 mm. E: 32 mm.
€156,16 €129,06 €143,67 €118,73
 
Ball joint 322 mm, M18 x 1,5, 22 mm, taper 20 - 22,2 mm
8%
Ball joint 322 mm, M18 x 1,5, 22 mm, taper 20 - 22,2 mm
A: 322 mm. C: M18 x 1,5 mm. D: 22 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm.
€43,61 €36,04 €40,12 €33,16
 
Track rod 440 mm, M24 x 1,5, 20 - 22 mm, 30 mm
8%
Track rod 440 mm, M24 x 1,5, 20 - 22 mm, 30 mm
A: 430 - 650 mm. B: M24 x 1,5 mm. C: 20 - 22 mm. G: . D: M18 x 1,5 mm. E: 30 mm....
€189,71 €156,79 €174,53 €144,24
 
VICTOR REINZ Cylinder head gasket set engine 4219D, 4239D/T, 4276 John Deere
8%
VICTOR REINZ
Cylinder head gasket set engine 4219D, 4239D/T, 4276 John Deere
€128,16 €105,92 €117,91 €97,44
 
Outlet valve John Deere 1550-4050, 2040S-4040S
8%
Outlet valve John Deere 1550-4050, 2040S-4040S
€55,66 €46,00 €51,21 €42,32
 
Helical gear John Deere
8%
Helical gear John Deere
€99,71 €82,41 €91,73 €75,81
 
Injection nozzle John Deere 510-3350
8%
Injection nozzle John Deere 510-3350
Menke no.: 54121.
€93,80 €77,52 €86,30 €71,32
 
Thrust bearing standard John Deere, Renault
8%
Thrust bearing standard John Deere, Renault
€54,53 €45,07 €50,17 €41,46
 
Push rod John Deere
Push rod John Deere
€31,84 €26,31
 
Radiator SG2 low roof John Deere 1640-3650
8%
Radiator SG2 low roof John Deere 1640-3650
Designation: SG2 in Niedrigdach-Version.
€304,33 €251,51 €279,98 €231,39
 
Drive shaft steering valve John Deere 830-3650
8%
Drive shaft steering valve John Deere 830-3650
€99,26 €82,03 €91,32 €75,47
 
Spacer lift arm 57,7 x 67 x 6 mm John Deere series 20-50
Spacer lift arm 57,7 x 67 x 6 mm John Deere series 20-50
Dimensions: 57.7 x 67 x 6 mm.
€8,00 €6,61
 
Bush for lower link strut 57 x 65,5 x 57 mm John Deere 820-2850
Bush for lower link strut 57 x 65,5 x 57 mm John Deere 820-2850
Dimensions: 57 x 65.5 x 57 mm.
€23,24 €19,20
 
Seal lift arm 58 x 6,5 mm John Deere 820-2850
Seal lift arm 58 x 6,5 mm John Deere 820-2850
Dimensions: 58 x 6.5 mm.
€9,60 €7,93
 
Gas strut rear- or windshield 200 N, 505 mm
8%
Gas strut rear- or windshield 200 N, 505 mm
suitable for: Heck- oder Frontscheibe. Newtons: 200. A: 505 mm. B: 265 mm. C: 10...
€51,83 €42,83 €47,68 €39,41
 
Gas strut roof window or rear window 300 N, 240 mm John Deere
Gas strut roof window or rear window 300 N, 240 mm John Deere
suitable for: Dachluke oder Heckscheibe. Newtons: 300. A: 240 mm. B: 130 mm. C: ...
€40,10 €33,14
 
HELLA Work lamp spotlight H3, 55/70 W, 12/24 V, Ø 152 x 120 mm
4%
HELLA
Work lamp spotlight H3, 55/70 W, 12/24 V, Ø 152 x 120 mm
Nominal voltage: 12 / 24 V. Form: Round. Dimensions W x H x D: Ø 152 x 120 mm. L...
€94,57 €78,16 €91,07 €75,27
 
Headlight insert left / right 12V45/40WAS R2
8%
Headlight insert left / right 12V45/40WAS R2
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2.
€57,89 €47,84 €53,26 €44,02
 
Headlight right 12 V, 45/40 W R2, dipped beam/main beam, attachment
8%
Headlight right 12 V, 45/40 W R2, dipped beam/main beam, attachment
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation location: Right....
€132,41 €109,43 €121,82 €100,68
 
HELLA Marker light C5W white/clear, square 84 x 51 mm, attachment
HELLA
Marker light C5W white/clear, square 84 x 51 mm, attachment
Bulb: C5W. Colour: White/clear. Connection: Blade terminal. Width: 84 mm. Form: ...
€16,58 €13,70
 
Tank sender plastic tank
8%
Tank sender plastic tank
Version: With plastic tank.
€97,10 €80,25 €89,33 €73,83
 
Sensor 1-pin, 1/8 inch NPT conical
Sensor 1-pin, 1/8 inch NPT conical
Version: 1-pin. Thread: 1/8” NPT, tapered.
€11,46 €9,47
 
Gaiter Ø upper 10 mm, lower 58 mm John Deere 920-3350
Gaiter Ø upper 10 mm, lower 58 mm John Deere 920-3350
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3120, 830, 930, 1030, 11...
€10,59 €8,75
 
Gear reduction starter 12 V, 3,4 kW, 10 teeth, 260 mm, clockwise
8%
Gear reduction starter 12 V, 3,4 kW, 10 teeth, 260 mm, clockwise
€288,94 €238,79 €265,82 €219,69
 
Universal joint 35 x 97 mm, centralised lubrication
8%
Universal joint 35 x 97 mm, centralised lubrication
A: 35 mm. B: 97 mm. Universal joint size: . Lubrication system: Centralised lubr...
€126,01 €104,14 €115,93 €95,81
 
Cover brake cylinder, medium mineral oil
8%
Cover brake cylinder, medium mineral oil
Medium: Mineral oil.
€62,82 €51,92 €57,79 €47,76
 
PTO shaft end piece John Deere 840-2140, 1350-2850
8%
PTO shaft end piece John Deere 840-2140, 1350-2850
€409,84 €338,71 €377,05 €311,61
 
Flywheel Ø gear ring 366 mm, 142 teeth John Deere 1640-3350
8%
Flywheel Ø gear ring 366 mm, 142 teeth John Deere 1640-3350
Number of teeth: 142.
€456,93 €377,63 €420,38 €347,42
 
VICTOR REINZ Cylinder head gasket engine 4039D/T, 4045D/T, 4202D, 4219D, 4239D/T, 4276
8%
VICTOR REINZ
Cylinder head gasket engine 4039D/T, 4045D/T, 4202D, 4219D, 4239D/T, 4276
€59,85 €49,46 €55,06 €45,51
 
Showing 145 - 192 of 371

John Deere 2040S parts for clutch, engine and steering

Keeping a John Deere 2040S at work means dealing with the jobs an older tractor brings: a clutch, an alternator, a weeping gasket. For this member of the John Deere 40 series, this page lists more than 350 parts from GRANIT, HELLA, LUK, MAHLE and VICTOR REINZ.

Clutch work

There are clutch plates, single clutch assemblies and internal plates, partly from LUK. Once the tractor is split, replace the clutch plate and pressure plate together. Splitting engine from gearbox is the costly part of the job, not the parts. Check the flywheel for heat spots and scoring and have it skimmed if needed, then use an alignment tool so the input shaft slides through the new plate without forcing.

Engine seals and electrics

For the engine there are gaskets, seals, O-rings and sealing rings, such as a seal for the feed pump, an O-ring for the oil pump and sealing rings for the injection nozzles. There is also a gasket for the lift housing. Always use new nozzle sealing rings, because a used one is already crushed and will not seal reliably a second time.

Alternators and starter motors come in several versions, so compare flange and pinion with the unit you removed. Relays and radiator hoses are available too.

Steering, driveshafts and linkage

Track rods cover the steering and universal joints the driveshafts. A universal joint that feels notchy in one position needs replacing, even if it does not rattle yet. Bushes for the lower link struts and tubes complete the picture.

After replacing a track rod, the toe-in will not be right on its own. Count the turns as you unscrew the old rod, screw the new one in the same amount, and have the toe-in checked afterwards. A radiator hose that feels soft or cracked with the engine cold should go, together with its clamps.

Bushes for the lower link struts wear oval over time. If the linkage knocks when you lift an implement, check the bushes before looking at anything more expensive.

Matching parts to the 2040S

The serial number is on the type plate. Many parts on this page also carry a John Deere reference number, which you will often find on the old part as well.

Other tractors from the 40 series with their own page are the John Deere 1640, John Deere 3640, John Deere 4040, John Deere 4240 and John Deere 4440. For the brand as a whole, see John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart