Menu
EUR

John Deere 2040S tractor parts & technical data

The John Deere 2040S from the 40 series gets its own overview here, with more than 350 parts such as lighting, electrics and engine components.

371 parts found for John Deere 2040S
Show:
Brake light switch oil pressure 1/8" NPT, 2,8 - 6,3 bar, neutral position off
Version: Thread 1/8" NPT, 2.8 - 6.3 bar, normally off, make contact. More
Version: Thread 1/8" NPT, 2.8 - 6.3 bar, normally off, make contact.
€22,98 €18,99
Radiator John Deere Series 40, 1640-2140
To fit as: John Deere 1640, 1840, 2040, 2040 S, 2140 More
To fit as: John Deere 1640, 1840, 2040, 2040 S, 2140
€591,78 €489,07 €544,44 €449,95
You save 8%
Injection nozzle John Deere 510-3350
To fit as: John Deere 510, 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630, 2030, 2130, 3130, 840, 940, 1040, 1140, 1640, 1840, 2040, 3040, 3140, 135... More
To fit as: John Deere 510, 820, 920, 1020, 1120, 830, 930, 1030, 1130,...
€79,67 €65,84 €73,30 €60,58
You save 8%
LUK Single clutch 320GDVM 41,5 x 44,8 mm, 27 splines John Deere
LUK
Flywheel dimension (mm): 21,6 | Dimensions (mm): 41.5 x 44.8 27 grooves More
Flywheel dimension (mm): 21,6 | Dimensions (mm): 41.5 x 44.8 27 groove...
€857,29 €708,50 €788,71 €651,82
You save 8%
Clutch plate 327, 25,8 x 32,1 mm, 10 splines, sintered
Dimensions (mm): 25.8 x 32.1, 10 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 25.8 x 32.1, 10 grooves | Material specifications: Si...
€289,79 €239,50 €266,61 €220,34
You save 8%
HELLA Alternator 14 V, 70 A, pulley Ø 82 mm, 1 groove John Deere
HELLA
Nominal values (V / A): 14 / 70 | No. of grooves: 1 | Charging current (A): 70 | Nominal voltage (V): 14 | Additional information: With pulley | Pulle... More
Nominal values (V / A): 14 / 70 | No. of grooves: 1 | Charging current...
€516,87 €427,17 €398,25 €329,13
You save 23%
Ball joint taper 19,9 - 22,2 mm, M18 x 1,5, M24 x 1,5, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,2 mm. Taper: 19,9 - 22,2 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,2 mm. T...
€38,19 €31,56 €35,13 €29,04
You save 8%
Track rod 1100 mm, M24 x 1,5, taper 19,9 - 22,25 mm
A: 1100 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,25 mm. Taper: 19,9 - 22,25 mm. Tube Ø: 30 mm. More
A: 1100 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,25 mm. Taper: 19,9 - 22...
€110,08 €90,98 €101,27 €83,70
You save 8%
Track rod 1345 mm, M18 x 1,5, 20 - 22 mm, 32 mm
A: 1345 mm. B: M18 x 1,5 mm. C: 20 - 22 mm. G: . D: M24 x 1,5 mm. E: 32 mm. More
A: 1345 mm. B: M18 x 1,5 mm. C: 20 - 22 mm. G: . D: M24 x 1,5 mm. E: 3...
€156,16 €129,06 €143,67 €118,73
You save 8%
Ball joint 322 mm, M18 x 1,5, 22 mm, taper 20 - 22,2 mm
A: 322 mm. C: M18 x 1,5 mm. D: 22 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 322 mm. C: M18 x 1,5 mm. D: 22 mm. E: 20 mm. F: 22,2 mm. Taper: 20 ...
€43,61 €36,04 €40,12 €33,16
You save 8%
Track rod 440 mm, M24 x 1,5, 20 - 22 mm, 30 mm
A: 430 - 650 mm. B: M24 x 1,5 mm. C: 20 - 22 mm. G: . D: M18 x 1,5 mm. E: 30 mm. F: 22,6 mm. More
A: 430 - 650 mm. B: M24 x 1,5 mm. C: 20 - 22 mm. G: . D: M18 x 1,5 mm....
€189,71 €156,79 €174,53 €144,24
You save 8%
VICTOR REINZ Cylinder head gasket set engine 4219D, 4239D/T, 4276 John Deere
€128,16 €105,92 €117,91 €97,44
You save 8%
Outlet valve John Deere 1550-4050, 2040S-4040S
€55,66 €46,00 €51,21 €42,32
You save 8%
Helical gear John Deere
€99,71 €82,41 €91,73 €75,81
You save 8%
Injection nozzle John Deere 510-3350
Menke no.: 54121. More
Menke no.: 54121.
€93,80 €77,52 €86,30 €71,32
You save 8%
Thrust bearing standard John Deere, Renault
€54,53 €45,07 €50,17 €41,46
You save 8%
Push rod John Deere
Radiator SG2 low roof John Deere 1640-3650
Designation: SG2 in Niedrigdach-Version. More
Designation: SG2 in Niedrigdach-Version.
€304,33 €251,51 €279,98 €231,39
You save 8%
Drive shaft steering valve John Deere 830-3650
€99,26 €82,03 €91,32 €75,47
You save 8%
Spacer lift arm 57,7 x 67 x 6 mm John Deere series 20-50
Dimensions: 57.7 x 67 x 6 mm. More
Dimensions: 57.7 x 67 x 6 mm.
€8,00 €6,61
Bush for lower link strut 57 x 65,5 x 57 mm John Deere 820-2850
Dimensions: 57 x 65.5 x 57 mm. More
Dimensions: 57 x 65.5 x 57 mm.
€23,24 €19,20
Seal lift arm 58 x 6,5 mm John Deere 820-2850
Dimensions: 58 x 6.5 mm. More
Dimensions: 58 x 6.5 mm.
€9,60 €7,93
Gas strut rear- or windshield 200 N, 505 mm
suitable for: Heck- oder Frontscheibe. Newtons: 200. A: 505 mm. B: 265 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: rear screen or windscreen. Menke no.: ... More
suitable for: Heck- oder Frontscheibe. Newtons: 200. A: 505 mm. B: 265...
€51,83 €42,83 €47,68 €39,41
You save 8%
Gas strut roof window or rear window 300 N, 240 mm John Deere
suitable for: Dachluke oder Heckscheibe. Newtons: 300. A: 240 mm. B: 130 mm. C: 6 mm. D: 6 mm. Form: 8. To fit: roof hatch or rear screen. More
suitable for: Dachluke oder Heckscheibe. Newtons: 300. A: 240 mm. B: 1...
€40,10 €33,14
HELLA Work lamp spotlight H3, 55/70 W, 12/24 V, Ø 152 x 120 mm
HELLA
Nominal voltage: 12 / 24 V. Form: Round. Dimensions W x H x D: Ø 152 x 120 mm. Light function: Far-reaching illumination. Bulb: H3. Material: Housing... More
Nominal voltage: 12 / 24 V. Form: Round. Dimensions W x H x D: Ø 152 ...
€94,57 €78,16 €91,07 €75,27
You save 4%
Headlight insert left / right 12V45/40WAS R2
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2.
€57,89 €47,84 €53,26 €44,02
You save 8%
Headlight right 12 V, 45/40 W R2, dipped beam/main beam, attachment
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation location: Right. Nominal voltage: 12 V. Light function: With dipped beam, with full be... More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation locati...
€132,41 €109,43 €121,82 €100,68
You save 8%
HELLA Marker light C5W white/clear, square 84 x 51 mm, attachment
HELLA
Bulb: C5W. Colour: White/clear. Connection: Blade terminal. Width: 84 mm. Form: Square. Height: 51 mm. Length: 84 mm. Hole spacing: 45 mm. Material: P... More
Bulb: C5W. Colour: White/clear. Connection: Blade terminal. Width: 84 ...
€16,58 €13,70
Tank sender plastic tank
Version: With plastic tank. More
Version: With plastic tank.
€97,10 €80,25 €89,33 €73,83
You save 8%
Sensor 1-pin, 1/8 inch NPT conical
Version: 1-pin. Thread: 1/8” NPT, tapered. More
Version: 1-pin. Thread: 1/8” NPT, tapered.
€11,46 €9,47
Gaiter Ø upper 10 mm, lower 58 mm John Deere 920-3350
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 840, 940, 1040, 1140, 1640, 18... More
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3120, 830, 930...
€10,59 €8,75
Gear reduction starter 12 V, 3,4 kW, 10 teeth, 260 mm, clockwise
€288,94 €238,79 €265,82 €219,69
You save 8%
Universal joint 35 x 97 mm, centralised lubrication
A: 35 mm. B: 97 mm. Universal joint size: . Lubrication system: Centralised lubrication. More
A: 35 mm. B: 97 mm. Universal joint size: . Lubrication system: Centra...
€126,01 €104,14 €115,93 €95,81
You save 8%
Cover brake cylinder, medium mineral oil
Medium: Mineral oil. More
Medium: Mineral oil.
€62,82 €51,92 €57,79 €47,76
You save 8%
PTO shaft end piece John Deere 840-2140, 1350-2850
€409,84 €338,71 €377,05 €311,61
You save 8%
Flywheel Ø gear ring 366 mm, 142 teeth John Deere 1640-3350
€456,93 €377,63 €420,38 €347,42
You save 8%
VICTOR REINZ Cylinder head gasket engine 4039D/T, 4045D/T, 4202D, 4219D, 4239D/T, 4276
€59,85 €49,46 €55,06 €45,51
You save 8%
Showing 145 - 192 of 371

John Deere 2040S parts for clutch, engine and steering

Keeping a John Deere 2040S at work means dealing with the jobs an older tractor brings: a clutch, an alternator, a weeping gasket. For this member of the John Deere 40 series, this page lists more than 350 parts from GRANIT, HELLA, LUK, MAHLE and VICTOR REINZ.

Clutch work

There are clutch plates, single clutch assemblies and internal plates, partly from LUK. Once the tractor is split, replace the clutch plate and pressure plate together. Splitting engine from gearbox is the costly part of the job, not the parts. Check the flywheel for heat spots and scoring and have it skimmed if needed, then use an alignment tool so the input shaft slides through the new plate without forcing.

Engine seals and electrics

For the engine there are gaskets, seals, O-rings and sealing rings, such as a seal for the feed pump, an O-ring for the oil pump and sealing rings for the injection nozzles. There is also a gasket for the lift housing. Always use new nozzle sealing rings, because a used one is already crushed and will not seal reliably a second time.

Alternators and starter motors come in several versions, so compare flange and pinion with the unit you removed. Relays and radiator hoses are available too.

Steering, driveshafts and linkage

Track rods cover the steering and universal joints the driveshafts. A universal joint that feels notchy in one position needs replacing, even if it does not rattle yet. Bushes for the lower link struts and tubes complete the picture.

After replacing a track rod, the toe-in will not be right on its own. Count the turns as you unscrew the old rod, screw the new one in the same amount, and have the toe-in checked afterwards. A radiator hose that feels soft or cracked with the engine cold should go, together with its clamps.

Bushes for the lower link struts wear oval over time. If the linkage knocks when you lift an implement, check the bushes before looking at anything more expensive.

Matching parts to the 2040S

The serial number is on the type plate. Many parts on this page also carry a John Deere reference number, which you will often find on the old part as well.

Other tractors from the 40 series with their own page are the John Deere 1640, John Deere 3640, John Deere 4040, John Deere 4240 and John Deere 4440. For the brand as a whole, see John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart