Menu
EUR

Tractor parts John Deere 2140

Looking for parts for your John Deere 2140 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

519 parts found for John Deere 2140
Show:
Threaded spindle 1 1/8" UNC left-hand thread, cat. 1, B 190 mm, G 246 mm
I: 1 1/8" UNC mm. Version: Left-hand thread. A: 19 mm. B: 190 mm. C: 44 mm. G: 246 mm. F: 56 mm. Category: 1 / 19. Menke no.: 54296. More
I: 1 1/8" UNC mm. Version: Left-hand thread. A: 19 mm. B: 190 mm. C: 4...
€39,17 €32,37 €35,65 €29,46
You save 9%
Oil pressure switch 15 bar, 3/8" - 24 UNF, 12 / 24 volt
Version: Operating pressure 15 bar, thread 3/8" - 24 UNF, 12 V / 24 V, angled blade terminal connection. More
Version: Operating pressure 15 bar, thread 3/8" - 24 UNF, 12 V / 24 V,...
€76,62 €63,32 €69,70 €57,60
You save 9%
Cobo Push button switch built-in make contact 12 V/30 A, 24 V/20 A, IP40
Cobo
Version: For flush mounting, make contact, normally off, 12 V / 30 A inductive, 24 V / 20 A inductive, IP40. Reference no.: 336.019.006. More
Version: For flush mounting, make contact, normally off, 12 V / 30 A i...
€20,50 €16,94
HELLA Branch connectors blue 0,8 - 2,0 mm² - 25 pieces
HELLA
Colour: Blue. Connection: Branch connectors. Cross section: 0,8 - 2,0 mm². More
Colour: Blue. Connection: Branch connectors. Cross section: 0,8 - 2,0 ...
€10,50 €8,68
GRANIT Relays changeover contact 12 V / 30 - 40 A, 5-pin, with holder
GRANIT
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal. More
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal.
€8,60 €7,11
HELLA Multifunction relay changeover contact 12 V, 30 - 40 A, 5-pin
HELLA
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks.... More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 ...
€15,85 €13,10
Radiator cap Ø 51 mm, height 32 mm John Deere, Steyr
To fit as: John Deere 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 20... More
To fit as: John Deere 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, ...
€14,35 €11,86
LUK Clutch plate 22,3 x 25,8 mm, 15 splines, sintered John Deere
LUK
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Sin...
€434,09 €358,75 €426,00 €352,07
You save 2%
Clutch plate 320, 22,3 x 25,8 mm, 15 splines, sintered
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 22.3 x 25.8, 15 grooves More
Material specifications: Sintered clutch lining | Additional informati...
€373,11 €308,36 €323,80 €267,60
You save 13%
MAHLE Alternator 14 V / 55 A, flange 56 mm, pulley-Ø 87 mm, form B
MAHLE
Flange size (mm): 56,0 | Additional information: Dust-tight | Installation angle (°): 0 | Belt width (mm) / type: 15,2 | Nominal values (V / A): 14 /... More
Flange size (mm): 56,0 | Additional information: Dust-tight | Installa...
€234,03 €193,41 €140,15 €115,83
You save 40%
KS Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
FTE Clutch slave cylinder Ø 38,1 mm John Deere 2140 - 3140
FTE
Material: Grey cast iron | Hole Ø (mm): 38.1 | Medium: DOT4 More
Material: Grey cast iron | Hole Ø (mm): 38.1 | Medium: DOT4
€347,35 €287,07 €316,20 €261,32
You save 9%
GRANIT Internal plate 4wd 1,5 mm, inner 79,5 mm, outer 141 mm
GRANIT
Version: thickness = 1,5 mm inner = 79,5 mm outer = 141 mm More
Version: thickness = 1,5 mm inner = 79,5 mm outer = 141 mm
€44,34 €36,64 €40,35 €33,35
You save 9%
External plate 1,5 mm, inner 99 mm, outer 152 mm, 6 teeth John Deere
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth More
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth
€40,51 €33,48 €36,85 €30,45
You save 9%
GRANIT Internal plate PTO clutch 2,5 mm, inner 92,8 mm, outer 133,2 mm
GRANIT
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines More
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines
€32,90 €27,19
AKS-Dasis Blower engine 12 V, shank Ø 9,5 x 127 mm John Deere 1052 - 8850
AKS-Dasis
Equipment: Shaft D mm 9.5 / Shaft length 127 | Voltage (V): 12 More
Equipment: Shaft D mm 9.5 / Shaft length 127 | Voltage (V): 12
€217,35 €179,63 €197,85 €163,51
You save 9%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 305 mm
Weight (g): 200 | Connection thread A: 1/2"" | Connection thread: F (M10) | Length (mm): 305 | Equipment: O-ring | Connection thread E: 3/8"" More
Weight (g): 200 | Connection thread A: 1/2"" | Connection thread: F (M...
€48,83 €40,36 €44,45 €36,74
You save 9%
Release bearing complete with sleeve Ø 49,6 mm, with ring John Deere 820 - 3350
Dimensions (mm): Ø 49.6, with ring More
Dimensions (mm): Ø 49.6, with ring
€93,94 €77,64 €85,50 €70,66
You save 9%
HELLA Alternator 14 V / 120 A, pulley Ø 60 mm, 8 grooves, Fendt, John Deere
HELLA
Pulley Ø (mm): 60 | Nominal values (V / A): 14 / 120 | No. of grooves: 8 | Charging current (A): 120 | Nominal voltage (V): 14 | Additional informati... More
Pulley Ø (mm): 60 | Nominal values (V / A): 14 / 120 | No. of grooves...
€479,09 €395,94 €369,10 €305,04
You save 23%
Prestolite Alternator 12 V, 70 A, pulley Ø 69 mm, belt 6pK
€252,98 €209,07 €230,30 €190,33
You save 9%
GRANIT Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 259 mm
€315,70 €260,91 €287,40 €237,52
You save 9%
BOSCH Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, clockwise
€446,52 €369,02 €430,00 €355,37
You save 4%
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, Ø 83 mm, clockwise
€546,11 €451,33 €420,75 €347,73
You save 23%
Showing 289 - 312 of 519

Parts for your John Deere 2140 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your John Deere 2140. We also offer the right parts for all other tractor types from John Deere. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your John Deere 2140. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your John Deere 2140. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer John Deere

John Deere is an American manufacturer of tractors and agricultural machinery. The headquarters is located in Moline, Illinois. The company originally started as a small blacksmith shop in Grand Detour. The first factory was established to produce a successful invention by John Deere: a steel self-cleaning plow. In Europe, John Deere has a tractor factory in Mannheim, Germany, and most harvesters come from Zweibrücken.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart