Menu
EUR

Tractor parts John Deere 2140

Looking for parts for your John Deere 2140 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

519 parts found for John Deere 2140
Show:
Threaded spindle 1 1/8" UNC left-hand thread, cat. 1, B 190 mm, G 246 mm
9%
Threaded spindle 1 1/8" UNC left-hand thread, cat. 1, B 190 mm, G 246 mm
I: 1 1/8" UNC mm. Version: Left-hand thread. A: 19 mm. B: 190 mm. C: 44 mm. G: 2...
€39,17 €32,37 €35,65 €29,46
 
Oil pressure switch 15 bar, 3/8" - 24 UNF, 12 / 24 volt
9%
Oil pressure switch 15 bar, 3/8" - 24 UNF, 12 / 24 volt
Version: Operating pressure 15 bar, thread 3/8" - 24 UNF, 12 V / 24 V, angled bl...
€76,62 €63,32 €69,70 €57,60
 
Cobo Push button switch built-in make contact 12 V/30 A, 24 V/20 A, IP40
Cobo
Push button switch built-in make contact 12 V/30 A, 24 V/20 A, IP40
Version: For flush mounting, make contact, normally off, 12 V / 30 A inductive, ...
€20,50 €16,94
 
HELLA Branch connectors blue 0,8 - 2,0 mm² - 25 pieces
HELLA
Branch connectors blue 0,8 - 2,0 mm² - 25 pieces
Colour: Blue. Connection: Branch connectors. Cross section: 0,8 - 2,0 mm².
€10,50 €8,68
 
GRANIT Relays changeover contact 12 V / 30 - 40 A, 5-pin, with holder
GRANIT
Relays changeover contact 12 V / 30 - 40 A, 5-pin, with holder
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal.
€8,60 €7,11
 
HELLA Multifunction relay changeover contact 12 V, 30 - 40 A, 5-pin
HELLA
Multifunction relay changeover contact 12 V, 30 - 40 A, 5-pin
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 mm, With p...
€15,85 €13,10
 
Radiator cap Ø 51 mm, height 32 mm John Deere, Steyr
Radiator cap Ø 51 mm, height 32 mm John Deere, Steyr
To fit as: John Deere 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130...
€14,35 €11,86
 
LUK Clutch plate 22,3 x 25,8 mm, 15 splines, sintered John Deere
2%
LUK
Clutch plate 22,3 x 25,8 mm, 15 splines, sintered John Deere
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Sintered clut...
€434,09 €358,75 €426,00 €352,07
 
Clutch plate 320, 22,3 x 25,8 mm, 15 splines, sintered
13%
Clutch plate 320, 22,3 x 25,8 mm, 15 splines, sintered
Material specifications: Sintered clutch lining | Additional information: Made i...
€373,11 €308,36 €323,80 €267,60
 
MAHLE Alternator 14 V / 55 A, flange 56 mm, pulley-Ø 87 mm, form B
40%
MAHLE
Alternator 14 V / 55 A, flange 56 mm, pulley-Ø 87 mm, form B
Flange size (mm): 56,0 | Additional information: Dust-tight | Installation angle...
€234,03 €193,41 €140,15 €115,83
 
KS Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
9%
KS
Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
€69,70 €57,60 €63,45 €52,44
 
FTE Clutch slave cylinder Ø 38,1 mm John Deere 2140 - 3140
9%
FTE
Clutch slave cylinder Ø 38,1 mm John Deere 2140 - 3140
Material: Grey cast iron | Hole Ø (mm): 38.1 | Medium: DOT4
€347,35 €287,07 €316,20 €261,32
 
GRANIT Internal plate 4wd 1,5 mm, inner 79,5 mm, outer 141 mm
9%
GRANIT
Internal plate 4wd 1,5 mm, inner 79,5 mm, outer 141 mm
Version: thickness = 1,5 mm inner = 79,5 mm outer = 141 mm
€44,34 €36,64 €40,35 €33,35
 
External plate 1,5 mm, inner 99 mm, outer 152 mm, 6 teeth John Deere
9%
External plate 1,5 mm, inner 99 mm, outer 152 mm, 6 teeth John Deere
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth
€40,51 €33,48 €36,85 €30,45
 
GRANIT Internal plate PTO clutch 2,5 mm, inner 92,8 mm, outer 133,2 mm
GRANIT
Internal plate PTO clutch 2,5 mm, inner 92,8 mm, outer 133,2 mm
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines
€32,90 €27,19
 
AKS-Dasis Blower engine 12 V, shank Ø 9,5 x 127 mm John Deere 1052 - 8850
9%
AKS-Dasis
Blower engine 12 V, shank Ø 9,5 x 127 mm John Deere 1052 - 8850
Equipment: Shaft D mm 9.5 / Shaft length 127 | Voltage (V): 12
€217,35 €179,63 €197,85 €163,51
 
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 305 mm
9%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 305 mm
Weight (g): 200 | Connection thread A: 1/2"" | Connection thread: F (M10) | Leng...
€48,83 €40,36 €44,45 €36,74
 
Release bearing complete with sleeve Ø 49,6 mm, with ring John Deere 820 - 3350
9%
Release bearing complete with sleeve Ø 49,6 mm, with ring John Deere 820 - 3350
Dimensions (mm): Ø 49.6, with ring
€93,94 €77,64 €85,50 €70,66
 
HELLA Alternator 14 V / 120 A, pulley Ø 60 mm, 8 grooves, Fendt, John Deere
23%
HELLA
Alternator 14 V / 120 A, pulley Ø 60 mm, 8 grooves, Fendt, John Deere
Pulley Ø (mm): 60 | Nominal values (V / A): 14 / 120 | No. of grooves: 8 | Charg...
€479,09 €395,94 €369,10 €305,04
 
Prestolite Alternator 12 V, 70 A, pulley Ø 69 mm, belt 6pK
9%
Prestolite
Alternator 12 V, 70 A, pulley Ø 69 mm, belt 6pK
€252,98 €209,07 €230,30 €190,33
 
GRANIT Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 259 mm
9%
GRANIT
Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 259 mm
€315,70 €260,91 €287,40 €237,52
 
BOSCH Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, clockwise
4%
BOSCH
Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, clockwise
€446,52 €369,02 €430,00 €355,37
 
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, Ø 83 mm, clockwise
23%
HELLA
Starter motor 12 V, 3,0 kW, 11 teeth, Ø 83 mm, clockwise
€546,11 €451,33 €420,75 €347,73
 
Showing 289 - 312 of 519

Parts for your John Deere 2140 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your John Deere 2140. We also offer the right parts for all other tractor types from John Deere. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your John Deere 2140. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your John Deere 2140. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer John Deere

John Deere is an American manufacturer of tractors and agricultural machinery. The headquarters is located in Moline, Illinois. The company originally started as a small blacksmith shop in Grand Detour. The first factory was established to produce a successful invention by John Deere: a steel self-cleaning plow. In Europe, John Deere has a tractor factory in Mannheim, Germany, and most harvesters come from Zweibrücken.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart