Menu
EUR

John Deere 3640 tractor parts & technical data

Choose from more than 400 parts for the John Deere 3640 from the 40 series. Lighting, electrics and trailer couplings are listed by group.

403 parts found for John Deere 3640
Show:
Alternator 12 V / 70 A, flange 56 mm, pulley Ø 87 mm, John Deere
Pulley Ø (mm): 87 | Flange size (mm): 56,0 | Installation angle (°): 0 | Nominal voltage (V): 12 | Belt tension hole Ø / R (mm): M8 / 84,5 | Mounti... More
Pulley Ø (mm): 87 | Flange size (mm): 56,0 | Installation angle (°):...
€184,49 €152,47 €175,25 €144,83
You save 5%
HELLA Alternator 14 V, 33 A, pulley Ø 92 mm, 1 groove
HELLA
Nominal values (V / A): 14 / 33 | No. of grooves: 1 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: With pulley | Pulle... More
Nominal values (V / A): 14 / 33 | No. of grooves: 1 | Charging current...
€344,33 €284,57 €276,80 €228,76
You save 20%
FEBI Feed pump 2 hole, 45 mm, flange 30 mm, thread 10x1 John Deere
FEBI
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 840, 940, 1040, 1140, 18... More
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 83...
€55,76 €46,08 €48,48 €40,07
You save 13%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, 246 mm, clockwise
€378,63 €312,92 €236,60 €195,54
You save 38%
HELLA Starter motor 12 V, 3 kW, 11 teeth, Ø 83 mm, clockwise
€790,40 €653,22 €635,45 €525,17
You save 20%
ZF Universal joint 30 x 83 mm, maintenance-free
€346,12 €286,05 €328,80 €271,74
You save 5%
GRANIT Brake plate 14 mm, Ø 221 x 307 mm John Deere 2130-3130
€181,86 €150,30 €172,75 €142,77
You save 5%
GRANIT Installation cable mini-contact plug 1 m
GRANIT
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510. More
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€163,94 €135,49 €155,70 €128,68
You save 5%
VICTOR REINZ Air receiver gasket John Deere
€3,52 €2,91
Oil pipe oil pump John Deere Series 11-6400, SE6100-SE6400
€35,39 €29,25 €33,60 €27,77
You save 5%
Oil pipe oil pump John Deere Series 11-6400, SE6100-SE6400
€35,39 €29,25 €33,60 €27,77
You save 5%
Oil cooler John Deere 1630-4050, 925-1075
€263,78 €218,00 €250,55 €207,07
You save 5%
Shim rocker arm shaft Ø 20,65 x 29,46 x 0,5 mm John Deere
Dimensions: Ø 20.65 x 29.46 x 0.5 mm. More
Dimensions: Ø 20.65 x 29.46 x 0.5 mm.
€11,15 €9,21
Spacer cylinder liner Ø 120,8 x 125,3 x 0,10 mm John Deere
Ø: 120,8 x 125,3 x 0,10 mm. More
Ø: 120,8 x 125,3 x 0,10 mm.
€26,95 €22,27
Lever for throttle linkage John Deere Series 30-8970, SE6010-SE6610
Showing 241 - 264 of 403

John Deere 3640 parts for a tractor that still works for a living

A John Deere 3640 that has been on the farm for years tends to need the same jobs again and again: a seat that has given up, a universal joint that knocks, a lift housing that weeps oil. This page gathers more than 400 John Deere 3640 parts from brands including GRAMMER, LUK, MAHLE, HELLA and GRANIT.

Seat and cab comfort

Tractor seats, among them air suspended models, make a real difference over a long day. When fitting a new seat, check the mounting points underneath against the console in the cab, and on an air seat make sure the supply connection matches.

Driveline, linkage and brakes

Universal joints, including versions with centralised lubrication, keep the driveline turning. Grease a universal joint until fresh grease appears at all four bearing caps. If one cap stays dry, move the shaft slightly and try again. A cap that still will not take grease means that bearing is finished.

For the linkage there is a lift housing gasket, along with bushes, springs and sealing rings. On the brakes you will find O-rings for the master cylinder. After work on the master cylinder, renew the fluid and bleed carefully so both pedals bite evenly.

Engine and electrics

Thermostats, seals for the feed pump and a stop cable cover the engine. If the engine starts fine but will not shut down cleanly, a stiff or stretched stop cable is a likely cause. Starter motors and alternators handle starting and charging, and relays, such as changeover relays, take care of switching. Hose sold by the metre lets you replace a split line to length yourself. A drawbar ball for the rear completes the picture.

Making sure it fits your 3640

The rating plate confirms the type. On the old part, look for a reference number stamped into the starter or alternator housing or printed on the edge of a gasket. For a universal joint, measure the cap and the width across the caps so you know the new one suits your yoke.

The 3640 belongs to the John Deere 40 series. These types from the series also have their own pages: the John Deere 1640, John Deere 2040S, John Deere 4040, John Deere 4240 and John Deere 4440. Order for the type you are working on. Every other model from the make is on the John Deere parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart