Menu
EUR

John Deere 3640 tractor parts & technical data

Choose from more than 400 parts for the John Deere 3640 from the 40 series. Lighting, electrics and trailer couplings are listed by group.

403 parts found for John Deere 3640
Show:
GRANIT Stop cable without detent 2270 mm, 2100 mm John Deere 840-3650
GRANIT
A: 2270 mm. B: 2100 mm. More
A: 2270 mm. B: 2100 mm.
€24,75 €20,45
GRANIT Bush for crankshaft John Deere
€37,86 €31,29 €35,95 €29,71
You save 5%
O-ring oil pump 24,994 x 3,531 mm John Deere
Dimensions: 24.994 x 3.531 mm. More
Dimensions: 24.994 x 3.531 mm.
€4,26 €3,52
GRANIT Intake gasket inner Ø 54,5 mm, hole spacing 87 mm John Deere, Renault
GRANIT
Dimensions: innen Ø54,5 mm, Lochabstand 87 mm, Schrauben Ø 11 mm. More
Dimensions: innen Ø54,5 mm, Lochabstand 87 mm, Schrauben Ø 11 mm.
€2,94 €2,43
GRANIT Seal feed pump John Deere
€2,03 €1,68
GRANIT Cylinder head gasket set upper engine 6059T-6466D John Deere, Renault
€84,55 €69,88 €80,30 €66,36
You save 5%
Connecting rod bolt 59 mm John Deere
Dimensions: 59 mm long. More
Dimensions: 59 mm long.
€16,00 €13,22
GRANIT Thrust bearing standard without thrust washer Ø 80 mm
GRANIT
Dimensions: Ø 80 mm. More
Dimensions: Ø 80 mm.
€40,29 €33,30 €38,25 €31,61
You save 5%
Tube vertical 1200 mm, inner-Ø 75 mm, exhaust Ø 75 mm John Deere
Version: Length: 1200 mm, Inner Ø: 75 mm, Outlet Ø: 75 mm. Outer Ø: 75 mm. Inner Ø: 75 mm. Length: 1200 mm. More
Version: Length: 1200 mm, Inner Ø: 75 mm, Outlet Ø: 75 mm. Outer Ø:...
€51,29 €42,39 €48,70 €40,25
You save 5%
Tube vertical 1050 mm, inner-Ø 75 mm, outer-Ø 75 mm John Deere
Version: Length: 1050 mm, Inner Ø: 75 mm, Outlet Ø: 75 mm. Outer Ø: 75 mm. Inner Ø: 75 mm. Length: 1050 mm. Menke no.: 59865. More
Version: Length: 1050 mm, Inner Ø: 75 mm, Outlet Ø: 75 mm. Outer Ø:...
€66,00 €54,55
GRANIT Tank cap with ventilation, tank collar Ø 80 mm
GRANIT
Filler neck Ø: 80 mm. More
Filler neck Ø: 80 mm.
€18,65 €15,41
End control unit John Deere 830-3650
€362,65 €299,71 €344,50 €284,71
You save 5%
GRANIT Valve guide John Deere 840-6920S
GRANIT Valve parts set hydraulic pump John Deere 840-3650
GRANIT
Menke no.: 221647. More
Menke no.: 221647.
€17,00 €14,05
Gas strut 150 N, 735,5 mm, stroke 323 mm, ball socket B plastic
suitable for: Heckscheibe. Newtons: 150. A: 735,5 mm. B: 375 mm. C: 10 mm. D: 10 mm. d1: 8 mm. d2: 18 mm. Stroke: 323 mm. Connection 1: Ball socket B ... More
suitable for: Heckscheibe. Newtons: 150. A: 735,5 mm. B: 375 mm. C: 10...
€44,10 €36,45
Bush set lift arm shaft Ø 7/8 inch, 42 x 20 x 28,2 mm John Deere
Dimensions: Ø = 7/8", 42 x 20 x 28.2 mm. More
Dimensions: Ø = 7/8", 42 x 20 x 28.2 mm.
€41,93 €34,65 €39,80 €32,89
You save 5%
Showing 265 - 288 of 403

John Deere 3640 parts for a tractor that still works for a living

A John Deere 3640 that has been on the farm for years tends to need the same jobs again and again: a seat that has given up, a universal joint that knocks, a lift housing that weeps oil. This page gathers more than 400 John Deere 3640 parts from brands including GRAMMER, LUK, MAHLE, HELLA and GRANIT.

Seat and cab comfort

Tractor seats, among them air suspended models, make a real difference over a long day. When fitting a new seat, check the mounting points underneath against the console in the cab, and on an air seat make sure the supply connection matches.

Driveline, linkage and brakes

Universal joints, including versions with centralised lubrication, keep the driveline turning. Grease a universal joint until fresh grease appears at all four bearing caps. If one cap stays dry, move the shaft slightly and try again. A cap that still will not take grease means that bearing is finished.

For the linkage there is a lift housing gasket, along with bushes, springs and sealing rings. On the brakes you will find O-rings for the master cylinder. After work on the master cylinder, renew the fluid and bleed carefully so both pedals bite evenly.

Engine and electrics

Thermostats, seals for the feed pump and a stop cable cover the engine. If the engine starts fine but will not shut down cleanly, a stiff or stretched stop cable is a likely cause. Starter motors and alternators handle starting and charging, and relays, such as changeover relays, take care of switching. Hose sold by the metre lets you replace a split line to length yourself. A drawbar ball for the rear completes the picture.

Making sure it fits your 3640

The rating plate confirms the type. On the old part, look for a reference number stamped into the starter or alternator housing or printed on the edge of a gasket. For a universal joint, measure the cap and the width across the caps so you know the new one suits your yoke.

The 3640 belongs to the John Deere 40 series. These types from the series also have their own pages: the John Deere 1640, John Deere 2040S, John Deere 4040, John Deere 4240 and John Deere 4440. Order for the type you are working on. Every other model from the make is on the John Deere parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart