Menu
EUR

John Deere 3640 tractor parts & technical data

Choose from more than 400 parts for the John Deere 3640 from the 40 series. Lighting, electrics and trailer couplings are listed by group.

403 parts found for John Deere 3640
Show:
LUK Single clutch 330DGVM 1 3/4 inch, 27 splines John Deere 2130 - 3640
LUK
Flywheel dimension (mm): 21,6 | Dimensions (inches): 1 3/4"" 27 grooves More
Flywheel dimension (mm): 21,6 | Dimensions (inches): 1 3/4"" 27 groove...
€968,42 €800,35 €919,95 €760,29
You save 5%
Single clutch refurbishment 41,5 x 44,8 mm, 27 key John Deere
Additional information: Made in Germany | Dimensions (mm): 41.5 x 44.8, 27 grooves | Flywheel dimension (mm): 21,6 More
Additional information: Made in Germany | Dimensions (mm): 41.5 x 44.8...
€570,43 €471,43 €541,90 €447,85
You save 5%
GRANIT Alternator 14 V / 33 A, flange 27 mm John Deere, Lindner, Massey Ferguson
GRANIT
Direction of rotation: ↻ | Belt tension hole Ø / R (mm): M6 / 83,0 | Nominal voltage (V): 14 | Pulley Ø (mm): 80,0 | Nominal values (V / A): 14 / ... More
Direction of rotation: ↻ | Belt tension hole Ø / R (mm): M6 / 83,0 ...
€131,50 €108,68 €124,90 €103,22
You save 5%
HELLA Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
HELLA
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal v...
€411,92 €340,43 €331,15 €273,68
You save 20%
HELLA Alternator 14 V / 120 A, pulley Ø 60 mm, 8 grooves, Fendt, John Deere
HELLA
Pulley Ø (mm): 60 | Nominal values (V / A): 14 / 120 | No. of grooves: 8 | Charging current (A): 120 | Nominal voltage (V): 14 | Additional informati... More
Pulley Ø (mm): 60 | Nominal values (V / A): 14 / 120 | No. of grooves...
€459,12 €379,44 €369,10 €305,04
You save 20%
Master cylinder Ø 23,81 mm, DOT4 John Deere 3640
Medium: DOT4. Hole Ø: 23.81 mm. Material: Grey cast iron. More
Medium: DOT4. Hole Ø: 23.81 mm. Material: Grey cast iron.
€541,92 €447,87 €514,80 €425,45
You save 5%
Reservoir hose connection DOT4, 0,15 liter, Ø 65 mm, height 119 mm
Nominal volume: 0,15 l. Fig.: A. D: 65 mm. H: 119 mm. h: 72 mm. L: 86 mm. L1: 55 mm. L2: 38 mm. Medium: DOT4. Height: 119 mm. Supplementary set: With ... More
Nominal volume: 0,15 l. Fig.: A. D: 65 mm. H: 119 mm. h: 72 mm. L: 86 ...
€58,09 €48,01 €55,15 €45,58
You save 5%
GRANIT Non-return valve brake cylinder John Deere 830-3650, combine 952-985
€67,06 €55,42 €63,70 €52,64
You save 5%
MAHLE Oil cooler 130 x 402 x 48 mm John Deere 1640-3640
MAHLE
Mesh length: 130 mm. Mesh width: 402 mm. Mesh depth: 48 mm. More
Mesh length: 130 mm. Mesh width: 402 mm. Mesh depth: 48 mm.
€770,47 €636,75 €481,50 €397,93
You save 38%
VICTOR REINZ Valve cover gasket John Deere 3120-7600
€42,24 €34,91 €40,10 €33,14
You save 5%
GRANIT Piston ring set 3 rings Ø 106,5 mm, 2,42 mm / 2,385 mm / 3,465 mm
€49,09 €40,57 €46,60 €38,51
You save 5%
GRANIT Thermostat Ø 54 mm, 85 °C John Deere
Arm for throttle linkage John Deere Series 30-8970, SE6010-SE6610
GRANIT Clamp injection nozzle John Deere 820-4050, 925-1177
GRANIT
Description: For injection nozzle. More
Description: For injection nozzle.
€31,55 €26,07
GRANIT Fitting John Deere - 50 pieces
GRANIT Radiator cap
€20,95 €17,31
GRANIT Oil cooler 402 x 130 x 48 mm John Deere 1640-3640
GRANIT
Width: 130 mm. Length: 402 mm. Depth: 48 mm. Version: Produced by BEHR. More
Width: 130 mm. Length: 402 mm. Depth: 48 mm. Version: Produced by BEHR...
€378,17 €312,54 €359,25 €296,90
You save 5%
Sealing ring John Deere
Piston ring set Ø 106,5 mm, 3 mm trapezoidal ring / 2,4 mm / 3,5 mm
Dimensions: 3 rings, Ø 106.5 mm, 3 mm (trapezoidal ring) / 2.4 mm / 3.5 mm. More
Dimensions: 3 rings, Ø 106.5 mm, 3 mm (trapezoidal ring) / 2.4 mm / 3...
€43,62 €36,05 €41,40 €34,21
You save 5%
Cylinder head gasket engine 6303D John Deere, Renault
€47,66 €39,39 €45,25 €37,40
You save 5%
Valve cover gasket engine 6303D John Deere, Renault
€47,24 €39,04 €44,85 €37,07
You save 5%
Showing 313 - 336 of 403

John Deere 3640 parts for a tractor that still works for a living

A John Deere 3640 that has been on the farm for years tends to need the same jobs again and again: a seat that has given up, a universal joint that knocks, a lift housing that weeps oil. This page gathers more than 400 John Deere 3640 parts from brands including GRAMMER, LUK, MAHLE, HELLA and GRANIT.

Seat and cab comfort

Tractor seats, among them air suspended models, make a real difference over a long day. When fitting a new seat, check the mounting points underneath against the console in the cab, and on an air seat make sure the supply connection matches.

Driveline, linkage and brakes

Universal joints, including versions with centralised lubrication, keep the driveline turning. Grease a universal joint until fresh grease appears at all four bearing caps. If one cap stays dry, move the shaft slightly and try again. A cap that still will not take grease means that bearing is finished.

For the linkage there is a lift housing gasket, along with bushes, springs and sealing rings. On the brakes you will find O-rings for the master cylinder. After work on the master cylinder, renew the fluid and bleed carefully so both pedals bite evenly.

Engine and electrics

Thermostats, seals for the feed pump and a stop cable cover the engine. If the engine starts fine but will not shut down cleanly, a stiff or stretched stop cable is a likely cause. Starter motors and alternators handle starting and charging, and relays, such as changeover relays, take care of switching. Hose sold by the metre lets you replace a split line to length yourself. A drawbar ball for the rear completes the picture.

Making sure it fits your 3640

The rating plate confirms the type. On the old part, look for a reference number stamped into the starter or alternator housing or printed on the edge of a gasket. For a universal joint, measure the cap and the width across the caps so you know the new one suits your yoke.

The 3640 belongs to the John Deere 40 series. These types from the series also have their own pages: the John Deere 1640, John Deere 2040S, John Deere 4040, John Deere 4240 and John Deere 4440. Order for the type you are working on. Every other model from the make is on the John Deere parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart