Menu
EUR

John Deere 3640 tractor parts & technical data

Choose from more than 400 parts for the John Deere 3640 from the 40 series. Lighting, electrics and trailer couplings are listed by group.

403 parts found for John Deere 3640
Show:
GRANIT Housing right metal, also als plastic housing available
€56,45 €46,65 €53,60 €44,30
You save 5%
HELLA Micro relays make contact 12 V, 15 A, 4-pin, with holder and fuse
HELLA
Version: 12 V / 15 A, With bracket and blade fuse insert, 4-pin, blade terminal 6.3 mm. Colour: Light blue. Power rating max. 12 V: 15. Switching func... More
Version: 12 V / 15 A, With bracket and blade fuse insert, 4-pin, blade...
€31,55 €26,07
GRANIT Fuel filter Ø 126 mm, inner-Ø 94 mm
GRANIT Master cylinder John Deere 3640
€391,85 €323,84 €372,25 €307,64
You save 5%
Window rubber clamping range 4 - 6 mm, h 14,5 x b 23,2 mm - 1 meter
Length (m): 1 | Clamping range (mm): 4 - 6 | H (mm): 14,5 | B (mm): 23,2 More
Length (m): 1 | Clamping range (mm): 4 - 6 | H (mm): 14,5 | B (mm): 23...
€10,70 €8,84
GRANIT Internal plate PTO shaft 5,9 mm, inner 28,5 mm, outer 110 mm, 19 teeth
GRANIT
Version: Thickness: 5.9 mm Inner: 28.5 mm Outer: 110 mm 19 teeth More
Version: Thickness: 5.9 mm Inner: 28.5 mm Outer: 110 mm 19 teeth
€82,39 €68,09 €78,25 €64,67
You save 5%
Internal plate Hi-Lo 2,3 mm, inner 152,3 mm, outer 191,9 mm, 6 teeth
Version: thickness = 2,3 mm inner = 152,3 mm outer = 191,9 mm 6 teeth More
Version: thickness = 2,3 mm inner = 152,3 mm outer = 191,9 mm 6 teeth
€47,66 €39,39 €45,25 €37,40
You save 5%
External plate 1,5 mm, inner 99 mm, outer 152 mm, 6 teeth John Deere
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth More
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth
€38,82 €32,08 €36,85 €30,45
You save 5%
GRANIT Internal plate PTO clutch 2,5 mm, inner 92,8 mm, outer 133,2 mm
GRANIT
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines More
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines
€32,90 €27,19
AKS-Dasis Thermal fuse airco John Deere 40 and 50 series
AKS-Dasis
Weight (g): 37 | Weight (kg): 0.037 More
Weight (g): 37 | Weight (kg): 0.037
€10,65 €8,80
LUK Central release bearing 2 connections 45,5 x 95 x 105 mm
LUK
Dimensions (mm): 45.5 x 95 x 105 More
Dimensions (mm): 45.5 x 95 x 105
€465,80 €384,96 €442,50 €365,70
You save 5%
LUK Central release bearing 3 connections John Deere 840 - 3650
€430,32 €355,64 €408,80 €337,85
You save 5%
GRANIT As hydraulic pump John Deere 840 - 3650
€120,64 €99,70 €114,60 €94,71
You save 5%
Prestolite Alternator 12 V, 70 A, pulley Ø 69 mm, belt 6pK
€242,44 €200,36 €230,30 €190,33
You save 5%
GRANIT Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€337,01 €278,52 €320,15 €264,59
You save 5%
GRANIT Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 259 mm
€302,54 €250,03 €287,40 €237,52
You save 5%
HELLA Starter motor 12 V, 3,1 kW, 10 teeth, Ø 83 mm, clockwise
€650,46 €537,57 €522,95 €432,19
You save 20%
Hose elbow to the oil cooler inner-Ø 19 mm John Deere
€26,50 €21,90
GRANIT Clamp half exhaust John Deere 1065-3640
€37,82 €31,26 €35,90 €29,67
You save 5%
GRANIT Push rod John Deere
€30,50 €25,21
Showing 361 - 384 of 403

John Deere 3640 parts for a tractor that still works for a living

A John Deere 3640 that has been on the farm for years tends to need the same jobs again and again: a seat that has given up, a universal joint that knocks, a lift housing that weeps oil. This page gathers more than 400 John Deere 3640 parts from brands including GRAMMER, LUK, MAHLE, HELLA and GRANIT.

Seat and cab comfort

Tractor seats, among them air suspended models, make a real difference over a long day. When fitting a new seat, check the mounting points underneath against the console in the cab, and on an air seat make sure the supply connection matches.

Driveline, linkage and brakes

Universal joints, including versions with centralised lubrication, keep the driveline turning. Grease a universal joint until fresh grease appears at all four bearing caps. If one cap stays dry, move the shaft slightly and try again. A cap that still will not take grease means that bearing is finished.

For the linkage there is a lift housing gasket, along with bushes, springs and sealing rings. On the brakes you will find O-rings for the master cylinder. After work on the master cylinder, renew the fluid and bleed carefully so both pedals bite evenly.

Engine and electrics

Thermostats, seals for the feed pump and a stop cable cover the engine. If the engine starts fine but will not shut down cleanly, a stiff or stretched stop cable is a likely cause. Starter motors and alternators handle starting and charging, and relays, such as changeover relays, take care of switching. Hose sold by the metre lets you replace a split line to length yourself. A drawbar ball for the rear completes the picture.

Making sure it fits your 3640

The rating plate confirms the type. On the old part, look for a reference number stamped into the starter or alternator housing or printed on the edge of a gasket. For a universal joint, measure the cap and the width across the caps so you know the new one suits your yoke.

The 3640 belongs to the John Deere 40 series. These types from the series also have their own pages: the John Deere 1640, John Deere 2040S, John Deere 4040, John Deere 4240 and John Deere 4440. Order for the type you are working on. Every other model from the make is on the John Deere parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart