Menu
EUR

John Deere 4440 tractor parts & technical data

Is your John Deere 4440 due for maintenance? Choose from more than 170 parts that fit, from lighting and trailer couplings to engine parts for the 40 series.

167 parts found for John Deere 4440
Show:
GRANIT Start safety switch contact function, M 16 x 1
GRANIT
Start safety switch contact function, M 16 x 1
Version: Contact function, Thread: M 16 x 1, With screw connection.
€37,40 €30,91
 
GRANIT Headlight insert left / right 12V45/40WAS R2
10%
GRANIT
Headlight insert left / right 12V45/40WAS R2
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2.
€58,25 €48,14 €52,70 €43,55
 
Headlight right 12 V, 45/40 W R2, dipped beam/main beam, attachment
5%
Headlight right 12 V, 45/40 W R2, dipped beam/main beam, attachment
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation location: Right....
€126,89 €104,87 €120,50 €99,59
 
Headlight left 12 V, 45/40 W R2, dipped beam/main beam, attachment
10%
Headlight left 12 V, 45/40 W R2, dipped beam/main beam, attachment
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation location: Left. ...
€133,23 €110,11 €120,50 €99,59
 
HELLA Lens, left, 3 light functions, without number plate light
HELLA
Lens, left, 3 light functions, without number plate light
Colour: Yellow, red. Installation location: Left. Test mark: E1 116, E1 53345, E...
€22,50 €18,60
 
HELLA Rear light 170 x 75 x 62 mm, 12 / 24 V, indicator and brake light
HELLA
Rear light 170 x 75 x 62 mm, 12 / 24 V, indicator and brake light
Bulb: P21W, R10W. Width: 170 mm. Form: Rectangular. Height: 75 mm. Hole spacing:...
€41,65 €34,42
 
Repair kit hydraulic pump John Deere 4020 - 8640
5%
Repair kit hydraulic pump John Deere 4020 - 8640
€203,64 €168,30 €193,45 €159,88
 
MAHLE Alternator 14 V / 95 A, flange 56 mm, pulley-Ø 87 mm
40%
MAHLE
Alternator 14 V / 95 A, flange 56 mm, pulley-Ø 87 mm
Mounting L / d / R (mm): 56.0 / 8.2 / 86.0 | Installation angle (°): 0 | Chargin...
€456,28 €377,09 €271,55 €224,42
 
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
5%
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€76,58 €63,29 €72,75 €60,12
 
MAHLE Starter motor 12 V, 4,0 kW, 10 teeth, clockwise, mounting Ø 89,0 mm
38%
MAHLE
Starter motor 12 V, 4,0 kW, 10 teeth, clockwise, mounting Ø 89,0 mm
€628,63 €519,53 €392,85 €324,67
 
Ball joint 75 mm, 5/8" x 18 mm, 7/8" x 18 mm, taper 16,8 - 20,5 mm
5%
Ball joint 75 mm, 5/8" x 18 mm, 7/8" x 18 mm, taper 16,8 - 20,5 mm
A: 75 mm. C: 5/8" x 18 mm. D: 7/8" x 18 mm. E: 16,8 mm. F: 20,5 mm. Taper: 16,8 ...
€52,49 €43,38 €49,85 €41,20
 
GRANIT Sealing ring 95,25 x 73,03 x 12,7 mm John Deere
GRANIT
Sealing ring 95,25 x 73,03 x 12,7 mm John Deere
Version: 95,25 x 73,03 x 12,7 mm.
€28,25 €23,35
 
PTO shaft end piece 272 mm, 540 rpm. John Deere
5%
PTO shaft end piece 272 mm, 540 rpm. John Deere
Version: Length 272 mm, 540 rpm.
€176,02 €145,47 €167,20 €138,18
 
GRANIT Cam set John Deere 985-5820
5%
GRANIT
Cam set John Deere 985-5820
€974,52 €805,39 €925,75 €765,08
 
GRANIT Thermostat Ø 54 mm, 85 °C John Deere
GRANIT
Thermostat Ø 54 mm, 85 °C John Deere
€37,50 €30,99
 
GRANIT Gasket John Deere 4040-4960, 7700-9120
GRANIT
Gasket John Deere 4040-4960, 7700-9120
€18,15 €15,00
 
Arm for throttle linkage John Deere Series 30-8970, SE6010-SE6610
5%
Arm for throttle linkage John Deere Series 30-8970, SE6010-SE6610
€68,61 €56,70 €65,15 €53,84
 
GRANIT Radiator hose by-pass inner-Ø 19 mm John Deere 2130
GRANIT
Radiator hose by-pass inner-Ø 19 mm John Deere 2130
Inner Ø: 19 mm. Description: From the oil cooler to the hydraulic pump.
€5,95 €4,92
 
GRANIT Tank cap tank collar Ø 60 mm
GRANIT
Tank cap tank collar Ø 60 mm
Filler neck Ø: 60 mm.
€21,30 €17,60
 
Air hose air intake manifold inner-Ø 76 mm, length 63,5 mm John Deere
Air hose air intake manifold inner-Ø 76 mm, length 63,5 mm John Deere
Inner Ø: 76 mm. Length: 63,5 mm.
€31,55 €26,07
 
GRANIT O-ring cylinder head Ø 18,72 x 2,61 mm John Deere
GRANIT
O-ring cylinder head Ø 18,72 x 2,61 mm John Deere
Description: Ø 18.72 x 2.61 mm.
€2,71 €2,24
 
GRANIT O-ring thermostat assembly cover John Deere
GRANIT
O-ring thermostat assembly cover John Deere
€8,10 €6,69
 
GRANIT Crankshaft, 6-cylinder forged, without gear wheel John Deere 4050-4955
10%
GRANIT
Crankshaft, 6-cylinder forged, without gear wheel John Deere 4050-4955
Notes: Please follow the instructions in the installation guide. Please complete...
€2.254,94 €1.863,59 €2.040,15 €1.686,07
 
Showing 97 - 120 of 167

John Deere 4440 parts to keep a classic working

Keeping a John Deere 4440 in daily use often comes down to a stop cable that moves freely, injection nozzles with a clean spray pattern and wiring without a sticking relay. More than 170 replacement parts fit this model, made by GRANIT and by HELLA, GRAMMER, BOSCH and VICTOR REINZ.

Fuel system and engine

For the fuel side there are injection nozzles, a stop cable and a lockable tank cap with a vent. That vent gets overlooked. When it blocks, the tank goes into vacuum and after a while the engine starves of diesel. If your 4440 dies after an hour of work and restarts after a short wait, loosen the tank cap first and listen for air rushing in.

Around the engine you will find thermostats, gaskets such as the turbocharger oil return line gasket, and seals for parts like the rear engine cover. VICTOR REINZ gaskets and sealing rings round off an overhaul.

Injection nozzles are best replaced as a set. An engine that smokes black, starts poorly or runs rough often has a nozzle that dribbles instead of atomising. Always fit new copper washers under the nozzles, or compression blows past and the holder is leaking again within a week.

Lights, brakes and electrics

Anyone driving a 4440 on the road needs working headlights, brake lights and indicators. For that there are HELLA headlights with dipped and main beam, a brake light switch and a flasher unit. Also relays and a solenoid switch for the starter. On the brake side there is an O-ring for the master brake cylinder.

  • cab: air suspended tractor seats from GRAMMER
  • rear: drawbars finished in John Deere green
  • servicing: thermostats, gaskets and sealing rings

Getting the right John Deere 4440 parts first time

The serial plate tells you whether it really is a 4440. Within the John Deere line-up it sits in the 40 series. Where parts changed during production, the serial number on the plate helps you pick the right one. If the old part still carries a number, on an injection nozzle or a thermostat for example, compare it with the details shown with the product.

From the same 40 series, the John Deere 1640, John Deere 2040S, John Deere 3640, John Deere 4040 and John Deere 4240 each have a page with the parts that fit them. Handy if you keep several of these green classics side by side. All models from the brand are listed under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart