Menu
EUR

John Deere 5095M tractor parts & technical data

Sorting out the lights or the electrics on a John Deere 5095M? More than 200 parts for this 5M series tractor are listed here, trailer couplings among them.

234 parts found for John Deere 5095M
Show:
GRANIT Piston ring set 3 rings Ø 106,5 mm, 2,42 mm / 2,385 mm / 3,465 mm
€49,09 €40,57 €46,60 €38,51
You save 5%
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Ø: 40,21 x 43,38 x 27,8 mm. More
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Ø: 40,21 x 43,38 x 27,8 mm. More
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
GRANIT V-belt tensioner Ø 74 mm, 39,25 mm wide, 20,3 Nm John Deere, Renault
€99,07 €81,88 €94,10 €77,77
You save 5%
VICTOR REINZ Cylinder head gasket engine 4039D, 4039T, 4045, 4045T, 4239 John Deere
€72,24 €59,70 €68,60 €56,69
You save 5%
GRANIT Push rod 265 mm John Deere Series 5G-7610, SE6010-SE6920
GRANIT
Dimensions: Length 265 mm. More
Dimensions: Length 265 mm.
€15,50 €12,81
Piston ring set Ø 106,5 mm, 3 mm trapezoidal ring / 2,4 mm / 3,5 mm
Dimensions: 3 rings, Ø 106.5 mm, 3 mm (trapezoidal ring) / 2.4 mm / 3.5 mm. More
Dimensions: 3 rings, Ø 106.5 mm, 3 mm (trapezoidal ring) / 2.4 mm / 3...
€43,62 €36,05 €41,40 €34,21
You save 5%
GRANIT O-ring cylinder head Ø 18,72 x 2,61 mm John Deere
GRANIT
Description: Ø 18.72 x 2.61 mm. More
Description: Ø 18.72 x 2.61 mm.
€2,71 €2,24
Seal kit feed pump John Deere
€34,09 €28,17 €32,35 €26,74
You save 5%
Set of parts pre-separator John Deere
€43,02 €35,55 €40,85 €33,76
You save 5%
Feed pump 2 hole, hole spacing 59 mm, flange up to end lever 22 mm
Version: 2 holes, Hole spacing: 59 mm, Flange to lever end: 22 mm. More
Version: 2 holes, Hole spacing: 59 mm, Flange to lever end: 22 mm.
€51,61 €42,65 €49,00 €40,50
You save 5%
GRANIT Push rod John Deere
€30,50 €25,21
GRANIT Union nut return line John Deere
GRANIT Sealing washer return line outer-Ø 10,5 mm, inner-Ø 5,6 mm
GRANIT
Dimensions: Height 5.4 <lt>br<gt> Outer Ø 10.5 <lt>br<gt> Inner Ø 5.6</gt></lt></gt></lt> mm. Outer Ø: 10,5 mm. Height: 5,4 mm. Inner Ø: 5,6 mm. M... More
Dimensions: Height 5.4 <lt>br<gt> Outer Ø 10.5 <lt>br<gt> Inner Ø 5....
€2,40 €1,98
GRANIT Gas strut rear window 200 N, 245 mm, stroke 81 mm
GRANIT
suitable for: Heckscheibe. Newtons: 200. A: 245 mm. B: 125 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 81 mm. To fit: Rear screen. More
suitable for: Heckscheibe. Newtons: 200. A: 245 mm. B: 125 mm. C: 8 mm...
€44,66 €36,91 €42,40 €35,04
You save 5%
GRANIT Handle right and left John Deere SE6100-6930 PR
€89,54 €74,00 €85,00 €70,25
You save 5%
GRANIT Rear-view mirror 296 x 215 mm, unheated, right John Deere
GRANIT
Dimensions: 296 x 215 mm. Height: 296 mm. Width: 215 mm. Radius of curvature: 1800 mm. Version: Unheated. Installation location: Right. Rod Ø: 16 - 2... More
Dimensions: 296 x 215 mm. Height: 296 mm. Width: 215 mm. Radius of cur...
€217,26 €179,55 €206,35 €170,54
You save 5%
Showing 169 - 192 of 234

John Deere 5095M parts for lighting, electrics and the cab

Long days with the work lights on and the air conditioning running put the electrical system of a 5095M to work. This page lists more than 200 parts that fit this John Deere from the 5M series, supplied by GRANIT, HELLA, Walterscheid, Cobo and ROCKINGER.

Relays, sensors and lamps

For the electrics there are changeover relays and micro relays, sensors and work lamps, including oval spotlights, plus headlights sold individually. When a circuit stops working, swap its relay with an identical one from a circuit that still works. If the fault moves with it, you have found the culprit without tracing a single wire. When ordering a new relay, check the number of pins and whether it needs a bracket.

Air conditioning and belt drive

Under the bonnet you will find an air conditioning compressor, V-belt tensioners and an air receiver gasket, along with O-rings, for example for the master brake cylinder, and other seals. A belt that squeals the moment the air conditioning kicks in usually points to a tensioner that has lost its spring. When you fit a new compressor, check that the tensioner still moves smoothly and returns properly. A sticky tensioner will wear out a new belt in no time.

Cab, bonnet and hitch

Door gas struts, cab hinges and bonnet plugs keep doors and panels closing properly and staying open when they should. At the back there are ball-type drawbars for the rail system and bushes for the pivot points.

Keep the drawbar ball lightly greased so the towing eye turns smoothly and ball and socket do not grind against each other dry. If the cab door rattles on the road, look at the hinges. A worn hinge pin creates play, and over time that play pulls the door seal out of line, letting in draughts and dust. A new hinge goes on quickly and the door closes tight again. Check the bushes at the pivot points while you are at it, as worn bushes often announce themselves only through rattles.

Making sure it fits

The type plate confirms you are working on a 5095M. If the old part still carries a reference number, use it to compare, as many sensors and relays look alike but have different connectors. Running other tractors from the 5M range? Each has its own page, so you can order per machine: the John Deere 5100M, 5090M, 5085M, 5105M, 5070M and 5115M. The 5075M belongs to the same range. Every other John Deere model is reachable through John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart