Menu
EUR

John Deere 6010 tractor parts & technical data

Trailer couplings, lighting and electrics are just a few of the more than 450 parts listed for the John Deere 6010 from the 6010/6010SE series.

462 parts found for John Deere 6010
Show:
GRANIT Bracket hood John Deere
€7,25 €5,99
Walterscheid Flange hitch manual 31 mm, 140 x 80 mm, M17, 2000 kg, 82,4 kN
Walterscheid
Lock: Manual pin. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Connecting pin: 3... More
Lock: Manual pin. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D...
€772,46 €638,40 €606,90 €501,57
You save 21%
GRANIT Bracket fender bracket right outside / left interior John Deere
GRANIT
Installation location: rechts bei Montage Kotflügelhalter außen, links bei Montage Kotflügelhalter innen. More
Installation location: rechts bei Montage Kotflügelhalter außen, lin...
€284,72 €235,31 €257,60 €212,89
You save 10%
Rotary switch PTO shaft with connection cable and plug
Version: For PTO shaft operation, Connection cable with plug. More
Version: For PTO shaft operation, Connection cable with plug.
€163,25 €134,92
GRANIT Work light square right, 12 V
GRANIT
Form: Square. Installation location: Right. More
Form: Square. Installation location: Right.
€83,55 €69,05 €79,35 €65,58
You save 5%
GRANIT Clutch cable driving clutch 1100 mm, sleeve 860 mm, M6 John Deere
GRANIT
To fit as: John Deere 6100, 6200, 6300, 6400, 6506, 6600, 6800, 6900, 6010, 6110, 6210, 6310, 6410, 6410S, 6510, 6610, 6810, 6910, 6910S, SE 6010, 611... More
To fit as: John Deere 6100, 6200, 6300, 6400, 6506, 6600, 6800, 6900, ...
€105,65 €87,31 €95,55 €78,97
You save 10%
GRANIT Clamp chrome-plated inner-Ø 70 mm
GRANIT
Inner-Ø (mm): 70 More
Inner-Ø (mm): 70
€20,80 €17,19
Clutch cable driving clutch 1240 mm, sleeve length 1000 mm, M6
Thread: M6 | Sleeve length (mm): 1000 | Cable length (mm): 1240 More
Thread: M6 | Sleeve length (mm): 1000 | Cable length (mm): 1240
€182,54 €150,86 €173,40 €143,31
You save 5%
Hollow shaft PTO shaft 267,5 mm, 540 / 540E / 1.000 rpm. John Deere
Version: Length 267.5 mm, Can be switched between 540/540E/1000 rpm. Reference no.: L101903. More
Version: Length 267.5 mm, Can be switched between 540/540E/1000 rpm. R...
€338,44 €279,70 €321,50 €265,70
You save 5%
GRANIT Shaft seal 70 x 95 x 13 mm John Deere
GRANIT
Version: 70 x 95 x 13 mm. Menke no.: 221668. More
Version: 70 x 95 x 13 mm. Menke no.: 221668.
€59,74 €49,37 €56,75 €46,90
You save 5%
GRANIT PTO shaft end piece 235 mm, 1 3/8 inch 21 splines, 1 3/4 inch 6 splines
GRANIT
Version: Length 235 mm, 1 3/8", 21 splines, 1 3/4", 6 splines. Reference no.: L173282. More
Version: Length 235 mm, 1 3/8", 21 splines, 1 3/4", 6 splines. Referen...
€252,18 €208,41 €239,55 €197,98
You save 5%
GRANIT Crankshaft with cylindrical nose John Deere
€1.350,19 €1.115,86 €1.282,65 €1.060,04
You save 5%
Radiator hose, top thermostat inner-Ø 60 mm John Deere
€90,57 €74,85 €86,00 €71,07
You save 5%
GRANIT Oil pump John Deere 3210-6420S
€208,17 €172,04 €197,75 €163,43
You save 5%
GRANIT Front cover gasket John Deere
€53,97 €44,60 €51,25 €42,36
You save 5%
GRANIT Oil sump gasket engine 4039D, 4039T, 4045, 4045T, 4239 John Deere
€32,45 €26,82 €30,80 €25,45
You save 5%
Yoke 250 mm, M30 x 3,5, yoke inner 25,2 mm John Deere
Dimensions: Length = 250, Clevis inside = 25.2, Ø = 18.5, Thread length = 90, Length to clevis = 155, M30 x 3.5 mm. Menke no.: 221685. More
Dimensions: Length = 250, Clevis inside = 25.2, Ø = 18.5, Thread leng...
€77,13 €63,74 €73,25 €60,54
You save 5%
Lift arm right, 12 teeth, bore Ø 20 mm John Deere
Dimensions: Hole Ø 20 mm. More
Dimensions: Hole Ø 20 mm.
€471,05 €389,30 €447,45 €369,79
You save 5%
GRANIT Bush 64 x 78,6 x 78,7 mm John Deere
GRANIT
Dimensions: 64.7 x 68.7 x 78.7 mm. More
Dimensions: 64.7 x 68.7 x 78.7 mm.
€26,30 €21,74
Bolts for outer lift cylinder lower John Deere
€88,69 €73,30 €84,25 €69,63
You save 5%
Fender extension left without number plate holder SE6010-SE6610
€213,12 €176,13 €192,80 €159,34
You save 10%
Showing 433 - 456 of 462

John Deere 6010 parts

More than 450 replacement parts fit the John Deere 6010, from a small O-ring for the oil pump to a complete tractor seat. Here is how they break down across the tractor.

Engine, cooling and electrics

For the engine there are thermostats and thermostat housing gaskets, O-rings and seals for the oil circuit, hoses and bushes. The electrical side includes starter motors, alternators and micro relays.

A slow cranking starter is not always a starter problem. Check the battery and the earth cable first, because a new starter on a corroded earth will turn just as slowly. If you only hear a click, look at the relay and the supply before anything else.

Plates for the PTO and front axle

Internal plates for the PTO clutch and external plates for the front axle are on this page too. When the PTO slips under load or the front axle lock no longer holds, replace the complete pack rather than just the worst plates. Soak new plates in the specified oil for a while before fitting them, as dry plates can burn on first engagement.

Seats and hitching

  • tractor seats and seat cushions, partly from GRAMMER
  • drawbar balls and automatic drawbars
  • forced steering parts from Scharmüller and Walterscheid
  • further parts from HELLA and GRANIT

Whenever the thermostat comes out, fit a new housing gasket and scrape the mating faces clean. Old gasket residue causes leaks even with a fresh gasket. Bleed the cooling system carefully afterwards, because an air pocket at the thermostat makes it open late. A hose that feels soft or swollen is worth replacing at the same time, so you do not have to drain the coolant again shortly after.

Check the forced steering ball and its socket for play from time to time. A little grease prevents it from running dry and wearing unevenly. A worn drawbar ball shows itself through knocks when pulling away and braking.

Getting the right fit for your 6010

The 6010 also exists as the 6010SE, and the identification plate tells you which one you have. For clutch plates, compare the number on an old plate. Starters and alternators carry a label on the housing with a reference number to check against.

The same John Deere range includes these tractors, each with its own page:

For any other model, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart