Menu
EUR

John Deere 6010 tractor parts & technical data

Trailer couplings, lighting and electrics are just a few of the more than 450 parts listed for the John Deere 6010 from the 6010/6010SE series.

462 parts found for John Deere 6010
Show:
GRANIT Connecting rod bolt 64 mm John Deere
GRANIT
Dimensions: 64 mm. More
Dimensions: 64 mm.
€8,85 €7,31
GRANIT Collet set John Deere
€3,62 €2,99
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€35,37 €29,23 €33,60 €27,77
You save 5%
Fuel line 108 mm John Deere
Dimensions: Length 108 mm. More
Dimensions: Length 108 mm.
€22,90 €18,93
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.291,98 €1.894,20 €1.800,80 €1.488,26
You save 21%
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.166,20 €1.790,25 €1.702,00 €1.406,61
You save 21%
GRANIT Push button switch hazard lights, button red with bulb, Ø 30 mm
GRANIT
Version: Push button operation, With bulb, red button with warning symbol, Connection cable with 7 blade terminals 6.3 x 0.8 mm, without 30b, Mounting... More
Version: Push button operation, With bulb, red button with warning sym...
€108,77 €89,89 €98,40 €81,32
You save 10%
Micro relay changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks. More
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 ...
€13,60 €11,24
Sauermann Forced steering right ball-Ø 50 mm, 110 x 65 mm John Deere
Sauermann
Tractor type: John Deere 6130, 6330, 6430, 6530, 6630, 6830, 6930, 7730, 7830, 7930, 7430, 7530, 7630 More
Tractor type: John Deere 6130, 6330, 6430, 6530, 6630, 6830, 6930, 773...
€795,33 €657,30 €719,55 €594,67
You save 10%
GRANIT Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
GRANIT
Version: 4 mm, Ø 295 mm More
Version: 4 mm, Ø 295 mm
€67,42 €55,72 €64,00 €52,89
You save 5%
Sauermann Forced steering ball Ø 50 mm, 110 x 65 mm John Deere
Sauermann
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm): 21 | Colour: Green | Hole pattern (mm): 110 x 65 | Ball Ø (mm): 50 More
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm...
€1.023,94 €846,23 €972,70 €803,88
You save 5%
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
GRAMMER
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): 12 | Seat heater: Yes | Upholstery type: Fabric / new design | Fore/af... More
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board vol...
€5.082,00 €4.200,00 €4.827,90 €3.990,00
You save 5%
Scharmüller Drawbar bracket 200 x 120 mm, bore M18, inner width 120 mm, black
Scharmüller
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal width: 120 mm. Version: Brackets. Category: Drawbar. More
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal widt...
€310,15 €256,32
Bush camshaft Ø 55,88 x 59,87 x 38,9 mm John Deere
€45,15 €37,31 €42,85 €35,41
You save 5%
Valve set for filter head
Description: For filter head. More
Description: For filter head.
€25,85 €21,36
GRANIT Thermostat Ø 54 mm John Deere, Renault
€33,53 €27,71 €31,85 €26,32
You save 5%
Water pump impeller Ø 94 mm, with gasket John Deere, Renault
Dimensions: Impeller Ø 94 mm. Version: With gasket. More
Dimensions: Impeller Ø 94 mm. Version: With gasket.
€134,84 €111,44 €128,00 €105,79
You save 5%
Connecting rod bush inner-Ø 35 mm John Deere
Dimensions: Inner Ø 35 mm. More
Dimensions: Inner Ø 35 mm.
€36,45 €30,12
GRAMMER Tractor seat Maximo Basic MSG85/721
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 480 mm. Joystick console: Optional. S... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.305,84 €1.079,21 €1.240,50 €1.025,21
You save 5%
Cobo Fixing bolt short
€7,90 €6,53
Solenoid switch starter motor 12 V, 80 A, 3 schraubkontakt
Version: 12 V / 80 A, 3 screw connections. Additional information: Spulenwiderstand: 3.95-4.15 Temporärer Strom: 800 Amp. More
Version: 12 V / 80 A, 3 screw connections. Additional information: Spu...
€50,69 €41,89 €45,85 €37,89
You save 10%
Showing 25 - 48 of 462

John Deere 6010 parts

More than 450 replacement parts fit the John Deere 6010, from a small O-ring for the oil pump to a complete tractor seat. Here is how they break down across the tractor.

Engine, cooling and electrics

For the engine there are thermostats and thermostat housing gaskets, O-rings and seals for the oil circuit, hoses and bushes. The electrical side includes starter motors, alternators and micro relays.

A slow cranking starter is not always a starter problem. Check the battery and the earth cable first, because a new starter on a corroded earth will turn just as slowly. If you only hear a click, look at the relay and the supply before anything else.

Plates for the PTO and front axle

Internal plates for the PTO clutch and external plates for the front axle are on this page too. When the PTO slips under load or the front axle lock no longer holds, replace the complete pack rather than just the worst plates. Soak new plates in the specified oil for a while before fitting them, as dry plates can burn on first engagement.

Seats and hitching

  • tractor seats and seat cushions, partly from GRAMMER
  • drawbar balls and automatic drawbars
  • forced steering parts from Scharmüller and Walterscheid
  • further parts from HELLA and GRANIT

Whenever the thermostat comes out, fit a new housing gasket and scrape the mating faces clean. Old gasket residue causes leaks even with a fresh gasket. Bleed the cooling system carefully afterwards, because an air pocket at the thermostat makes it open late. A hose that feels soft or swollen is worth replacing at the same time, so you do not have to drain the coolant again shortly after.

Check the forced steering ball and its socket for play from time to time. A little grease prevents it from running dry and wearing unevenly. A worn drawbar ball shows itself through knocks when pulling away and braking.

Getting the right fit for your 6010

The 6010 also exists as the 6010SE, and the identification plate tells you which one you have. For clutch plates, compare the number on an old plate. Starters and alternators carry a label on the housing with a reference number to check against.

The same John Deere range includes these tractors, each with its own page:

For any other model, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart