Menu
EUR

John Deere 6120 tractor parts & technical data

More than 650 items fit the John Deere 6120 from the 6020/6020SE series. Trailer couplings, lighting and electrics are neatly sorted by product group.

690 parts found for John Deere 6120
Show:
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€90,40 €74,71 €83,17 €68,73
You save 8%
MAHLE Alternator 14 V, 90 A, fastening 56 / 10,2 / 90 mm Fendt, John Deere
MAHLE
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Flange size (mm): 56,0 | Charging current (A): 90 | Form: B | Pulley Ø ... More
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 /...
€472,24 €390,28 €282,84 €233,75
You save 40%
Alternator 14 V / 90 A, flange 2 x 56 mm
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Nominal voltage (V): 14 | Additional information: Compact al... More
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | ...
€255,27 €210,97 €234,85 €194,09
You save 8%
Alternator 14 V / 150 A, flange 56 mm
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction of rotation: ↻ | Mounting hole Ø / R (mm): 10.3 / 90.0 | Nominal values (V /... More
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction...
€293,13 €242,26 €269,68 €222,88
You save 8%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 | Nominal voltage (V): 14 | Form: B | Pulley Ø (mm): - | Nominal value... More
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (m...
€215,54 €178,13 €198,30 €163,88
You save 8%
SANDEN Airco compressor 12 V, R134a, pulley Ø 120 mm, PV8, 180 ccm oil
SANDEN
Nominal voltage (V): 12 | Oil quantity (ccm): 180 | For compressor: 10PA15C | Additional information: PV8 | Pulley Ø (mm): 120 | Fixing: DM | Refrige... More
Nominal voltage (V): 12 | Oil quantity (ccm): 180 | For compressor: 10...
€651,29 €538,26 €599,19 €495,20
You save 8%
DANA Spicer King pin final drive front axle 740 John Deere 6020 - 6630
€112,98 €93,37 €103,94 €85,90
You save 8%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Scharmüller
Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Co... More
Assembly notes: Anticlockwise | Description: Approved for steering for...
€636,37 €525,93 €585,46 €483,85
You save 8%
LED work lights floodlight 40 W, 108 x 77 mm
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 108 | Dimensions W x H x D (mm): 108 x 77 | Fixing: Screw fixing | Nominal voltag... More
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 1...
€66,47 €54,93 €61,15 €50,54
You save 8%
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
GRAMMER
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): 12 | Seat heater: Yes | Upholstery type: Fabric / new design | Fore/af... More
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board vol...
€5.303,07 €4.382,70 €4.928,82 €4.073,41
You save 7%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, Ø 83 mm, clockwise
€546,11 €451,33 €420,77 €347,74
You save 23%
Drive shaft 665 mm John Deere 6090MC, 6110-6430
€1.208,34 €998,63 €1.111,67 €918,74
You save 8%
Scharmüller Drawbar bracket 200 x 120 mm, bore M18, inner width 120 mm, black
Scharmüller
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal width: 120 mm. Version: Brackets. Category: Drawbar. More
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal widt...
€322,05 €266,16 €296,29 €244,86
You save 8%
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Long. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width:... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Optibelt Multi-rib belt 8 ribs John Deere, Case IH, New Holland
€114,23 €94,41 €105,09 €86,85
You save 8%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 530 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€3.917,46 €3.237,57
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Referenc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.018,93 €842,09 €937,42 €774,72
You save 8%
Walterscheid Drawbar support M20, black, John Deere
Walterscheid
Colour: black | Description: Drawbar support that can be mounted securely in the direction of travel at the rear below the gearbox. More
Colour: black | Description: Drawbar support that can be mounted secur...
€638,58 €527,75 €504,86 €417,24
You save 21%
Expander Repair bolt front axle suspension Ø 30 mm, 138 mm, M16 x 1,5 John Deere
Expander
H (mm): 19 | To fit: John Deere | Splayed dimensions (mm): 0 - 2 | A (mm): 138 | C (mm): 47,02 | Ø F (mm): M16 x 1,5 | Type: Special version | G (mm)... More
H (mm): 19 | To fit: John Deere | Splayed dimensions (mm): 0 - 2 | A (...
€575,31 €475,46
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
Version: 4 mm, Ø 295 mm More
Version: 4 mm, Ø 295 mm
€70,35 €58,14 €64,72 €53,49
You save 8%
External plate thickness 2,2 mm, inner 100 mm, outer 146 mm
Version: Thickness: 2.2 mm Inner: 100 mm Outer: 146 mm More
Version: Thickness: 2.2 mm Inner: 100 mm Outer: 146 mm
€56,53 €46,72 €52,01 €42,98
You save 8%
Scharmüller Forced steering K50, 250 mm, both sides, black, 20,06 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Connecti... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Bo...
€1.222,48 €1.010,31 €1.124,68 €929,49
You save 8%
Scharmüller Forced steering K50, 250 mm, left, black, 12 kg John Deere
Scharmüller
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm ... More
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Descriptio...
€636,37 €525,93 €585,46 €483,85
You save 8%
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Scharmüller
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bearing supports | Load capacity (kg): 3000 | Version: Prepared for drawba... More
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Cate...
€1.754,76 €1.450,21 €1.664,38 €1.375,52
You save 5%
Wabco Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
Wabco
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 | Pressure regulator cut-off pressure (bar): 7,3 ±0,2 | Connection: M22 x 1,5 More
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 |...
€625,38 €516,84 €575,35 €475,50
You save 8%
Wabco Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
Wabco
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit: Including - EVOBUS - MERCEDES-BENZ | Inlet connection: 1: M22 x 1,5 | Version:... More
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit...
€65,78 €54,36 €60,52 €50,01
You save 8%
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M12 x 1,5, standard open
€353,16 €291,87 €324,91 €268,52
You save 8%
Wabco Trailer control valve mineral oil 0-1 bar, final pressure 20 bar, 2 m³
Wabco
End pressure (bar): 20 | Set pressure (bar): 0-1 | Displacement (m³): 2 More
End pressure (bar): 20 | Set pressure (bar): 0-1 | Displacement (m³):...
€1.905,32 €1.574,64 €1.752,89 €1.448,67
You save 8%
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
Version: Ø 34,5 x 3,5 mm More
Version: Ø 34,5 x 3,5 mm
€6,79 €5,61
Piston Hi-Lo clutch 246 x 292 mm John Deere
Version: 246 x 292 mm More
Version: 246 x 292 mm
€127,79 €105,61
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
Version: 285 x 113 x 3.3 mm, 54 splines More
Version: 285 x 113 x 3.3 mm, 54 splines
€124,79 €103,13 €114,81 €94,88
You save 8%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth More
Version: 292 x 219 x 5,16 mm 87 teeth
€97,35 €80,45 €89,56 €74,02
You save 8%
Sauermann Bolt lock with release John Deere 5070M - 8530
Sauermann
Description: With release More
Description: With release
€298,23 €246,47 €274,37 €226,75
You save 8%
Sauermann Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
€325,63 €269,12 €299,58 €247,59
You save 8%
Sauermann Cast lid Ø 8,2 mm John Deere
€203,66 €168,31 €187,37 €154,85
You save 8%
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth More
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth
€65,27 €53,94 €60,05 €49,63
You save 8%
External plate thickness 10 mm, inner 238 mm, outer 347 mm, 4 teeth
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth More
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth
€128,47 €106,17 €118,19 €97,68
You save 8%
External plate thickness 3 mm, inner 138 mm, outer 215 mm
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€69,85 €57,73 €64,26 €53,11
You save 8%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm More
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€113,18 €93,54 €104,13 €86,05
You save 8%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€49,85 €41,20 €45,86 €37,90
You save 8%
Aircon compressor 10PA15C 12 V, pulley Ø 120 mm, 8 grooves
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Refrigerant: R 134a | Oil quantity (ccm): 160 | Referen... More
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 ...
€647,38 €535,02 €595,59 €492,22
You save 8%
HELLA Alternator 14 V / 150 A, without belt pulley, 7,33 kg
HELLA
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 150 | Charging current (A): 150 More
Nominal voltage (V): 14 | Additional information: Without pulley | Nom...
€749,79 €619,66 €577,70 €477,44
You save 23%
DANA Spicer Ball joint 285 mm, M20 x 1,5 / M26 x 1,5, taper 23,66 - 26,2 mm
€261,00 €215,70 €240,12 €198,45
You save 8%
DANA Spicer Differential bevel gear final drive front axle 730
€244,50 €202,07 €224,94 €185,90
You save 8%
DANA Spicer Joint final drive front axle 730 John Deere
€1.455,90 €1.203,23
FEBI Engine oil filter Ø 92,96 mm, height 150,88 mm, thread M92 x 2,5
€29,97 €24,77 €19,21 €15,88
You save 36%
Showing 97 - 144 of 690

John Deere 6120 parts for the linkage, belts and drawbar

A 6120 that has spent years with a plough or cultivator on the rear linkage shows it in the lift arms and bushes. More than 650 John Deere 6120 parts fit this tractor, and the linkage is a good place to start.

If a lift arm has play, look at the bushes first. A bush worn oval lets the arm move sideways and the implement hangs crooked. Always renew the bushes on both sides at once and grease them after fitting so they do not run in dry. Lift arms are listed for the left hand side, for example.

Drawbar, forced steering and ball joints

At the rear there are drawbar balls, automatic drawbars, drawbar frames in John Deere green and forced steering parts. For the tractor's own steering there are ball joints. To check them, have someone turn the steering wheel back and forth with the wheels on the ground. If a joint visibly moves in its housing it is worn out, and after replacing it the toe-in needs resetting.

Belts, charging and lighting

The belt drive is covered by belt kits for tractors without air conditioning and multi-rib belts for tractors with it, so the right one depends on how your tractor is equipped. There are also alternators, work lamps from HELLA and others, hose by the metre, O-rings such as the one for the tank sender, regulator housing gaskets and external plates for the ZF front axle.

An alternator that hums or whines usually has a worn bearing. Take the belt off and spin the pulley by hand, and roughness or play is obvious straight away. Cut hose from the roll square and fit new clamps. If you smell diesel around the tank, look at the tank sender O-ring, which hardens with age and starts to weep when the tank is full.

Finding the right part

The type plate confirms you are working on a 6120. For a lift arm check left or right, for a belt the number of ribs and the length, and nearly every part that comes off carries a reference number to compare against. Brands include GRANIT, HELLA, ROCKINGER, Sauermann and Wabco.

The John Deere 6220, John Deere 6320, John Deere 6420, John Deere 6520, John Deere 6620 and John Deere 6820 in the 6020 series have pages of their own, so you can see per model what fits. For a contractor or a mixed fleet that saves a lot of back and forth. For the full make, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart