Menu
EUR

John Deere 6120 tractor parts & technical data

More than 650 items fit the John Deere 6120 from the 6020/6020SE series. Trailer couplings, lighting and electrics are neatly sorted by product group.

690 parts found for John Deere 6120
Show:
LED work lights spotlight 65 W, 166 x 115 x 95 mm John Deere
Theoretical luminous flux (lm): 5200 | Light colour (K): 6000 | Bulb: LED | Effective luminous flux (lm): 3800 | Dimensions W x H x D (mm): 166 x 115 ... More
Theoretical luminous flux (lm): 5200 | Light colour (K): 6000 | Bulb: ...
€103,79 €85,78 €95,49 €78,91
You save 8%
Crankshaft seal 55,4 x 84 x 8 mm John Deere 5075GL - 6195R
Outer Ø (mm): 84 | Width (mm): 8 | Inner Ø (mm): 55,4 More
Outer Ø (mm): 84 | Width (mm): 8 | Inner Ø (mm): 55,4
€34,99 €28,92
FEBI Multi-rib belt Powerband John Deere, Case IH, New Holland
FEBI
To fit as: John Deere More
To fit as: John Deere
€45,25 €37,40 €27,36 €22,61
You save 40%
Starter motor with reduction 12 V, 3,4 kW, 10 teeth, 239 mm, Ø 82,5 mm
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.277,79 €1.882,47 €1.850,84 €1.529,62
You save 19%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, John Deere green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 100 kN. Colour: JD green. Technical data: Kugelkupplung... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.485,41 €1.227,61 €1.194,48 €987,17
You save 20%
Fender quarter circle 320 x 1070 mm black, without bracket
Width B: 320 mm. Length L: 1070 mm. Colour: Black. Description: • Manufactured using a rotation process • Material: (PE) polyethylene • Good fle... More
Width B: 320 mm. Length L: 1070 mm. Colour: Black. Description: • Ma...
€59,20 €48,93 €54,46 €45,01
You save 8%
Solenoid switch starter motor 12 V, 80 A, 3 schraubkontakt
Version: 12 V / 80 A, 3 screw connections. Additional information: Spulenwiderstand: 3.95-4.15 Temporärer Strom: 800 Amp. More
Version: 12 V / 80 A, 3 screw connections. Additional information: Spu...
€50,38 €41,64 €46,35 €38,31
You save 8%
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Super comfort seat with low-frequency air suspension and 12V compressor. APS: automatic positioning system. Armrests height adjustable and folding. Ad... More
Super comfort seat with low-frequency air suspension and 12V compresso...
€1.991,23 €1.645,64
Scharmüller Forced steering K50, 2 ton, 250 mm, left John Deere
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€754,30 €623,39 €693,96 €573,52
You save 8%
Wabco Silencer Ø 57 mm, height 107 mm, clamp
Wabco
Version: Mounting with clamp Ø 57 mm, height 107 mm More
Version: Mounting with clamp Ø 57 mm, height 107 mm
€123,74 €102,26 €113,84 €94,08
You save 8%
Wabco Trailer control valve 8 bar, M22 x 1,5, screw distance 117 x 117 mm
€809,41 €668,93 €744,66 €615,42
You save 8%
Voith Torsion damper M10 x 50 bolts John Deere 5070M - 6920S
€1.065,44 €880,53 €980,20 €810,09
You save 8%
HELLA Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
HELLA
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal v...
€429,84 €355,24 €331,19 €273,71
You save 23%
DANA Spicer Wheel hub final drive front axle 730
€408,30 €337,44
HELLA Alternator 14 V, 120 A, without belt pulley John Deere
HELLA
Additional information: Without pulley | Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 More
Additional information: Without pulley | Nominal values (V / A): 14 / ...
€537,98 €444,61 €414,51 €342,57
You save 23%
FEBI Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R
FEBI
Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R More
Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R
€79,98 €66,10 €25,44 €21,02
You save 68%
ZF Cross journal ZF front axle 4475005096, 71 x 71 x 28,5 mm
€357,49 €295,45 €328,89 €271,81
You save 8%
Drive shaft length inserted 1600 mm John Deere
€1.243,06 €1.027,32 €1.143,62 €945,14
You save 8%
Wabco Compressor 18 bar, 159 cm³, Ø 75 mm, stroke 36 mm, V-pulley 22,5 mm
Wabco
Operating pressure max.: 18 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Thread:... More
Operating pressure max.: 18 bar. Cylinder capacity: 159 cm³. Speed: 3...
€2.950,63 €2.438,54 €2.827,62 €2.336,88
You save 4%
ROCKINGER Forced steering right K50, Rockinger drawbar frame 787880K01140
ROCKINGER
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hitch support 787880K01140. More
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hit...
€733,91 €606,54 €565,46 €467,33
You save 23%
Scharmüller Drawbar frame prepared draw pendulum 330/25/32 mm, 91,3 kN
Scharmüller
suitable for: John Deere. Series: 6M 6110 - 6145 (Tier 4 Final) MY18. Category: Bearing supports. Version: Prepared for drawbar. Colour: JD green. D-v... More
suitable for: John Deere. Series: 6M 6110 - 6145 (Tier 4 Final) MY18. ...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
MAHLE Inlet cover expansion tank 0,45 bar, grommet-Ø 37 mm, 76 x 76 x 37 mm
MAHLE
Neck Ø: 37 mm. Opening pressure: 0,45 bar. Notes: Green. Technical data: 76 x 76 x 37 mm. More
Neck Ø: 37 mm. Opening pressure: 0,45 bar. Notes: Green. Technical da...
€16,49 €13,63
PROBOSS Seat PROBOSS AS3510 air suspended, fabric, 510 mm, 12 V
PROBOSS
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 510 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€1.383,42 €1.143,32
Replacement key lock number 14610 John Deere, Case IH
Locking number: 14610. Menke no.: 221631. More
Locking number: 14610. Menke no.: 221631.
€21,20 €17,52
Handle John Deere series 6000-6030, 6M, 6MC, 6R
€36,17 €29,89 €33,28 €27,50
You save 8%
Gas strut door- or rear window 130 N, 500 mm John Deere, Case IH
Newtons: 130. A: 500 mm. B: 250 mm. C: 8 mm. D: 8 mm. To fit: door or rear screen. Form: 6. Menke no.: 59787. More
Newtons: 130. A: 500 mm. B: 250 mm. C: 8 mm. D: 8 mm. To fit: door or ...
€35,53 €29,36
Reverse gear multifunction unit with direction control
Version: Multifunction unit (with electrical direction of travel control). More
Version: Multifunction unit (with electrical direction of travel contr...
€1.320,29 €1.091,15
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
€2.805,57 €2.318,65 €2.211,65 €1.827,81
You save 21%
ZF Sun gear shaft 16 teeth, Ø 132 mm ZF front axle 4475005018
ZF
Reference no.: 4475.305.182 | Außen-Ø (mm): 37,3 Durchmesser (mm): 132 Anzahl Zähne: 16 Verzahnungsbreite: 50 More
Reference no.: 4475.305.182 | Außen-Ø (mm): 37,3 Durchmesser (mm): 1...
€609,33 €503,58
MAHLE Alternator 14 V / 95 A, flange 56 mm John Deere
MAHLE
Belt width (mm) / type: - | Flange size (mm): 56,0 | Nominal voltage (V): 14 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Additional information: C... More
Belt width (mm) / type: - | Flange size (mm): 56,0 | Nominal voltage (...
€514,44 €425,16 €308,11 €254,64
You save 40%
Sauermann Forced steering ball Ø 50 mm, 110 x 65 mm John Deere
Sauermann
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm): 21 | Colour: Green | Hole pattern (mm): 110 x 65 | Ball Ø (mm): 50 More
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm...
€1.068,48 €883,04 €983,00 €812,40
You save 8%
Scharmüller Forced steering K50, 250 mm, both sides, black, 18 kg
Scharmüller
Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour... More
Assembly notes: Both ends | Description: Approved for steering forces ...
€1.222,48 €1.010,31 €1.124,68 €929,49
You save 8%
LED main headlight 12 / 24 V, 155 x 92 x 82 mm, H4, u-bolt John Deere
Depth (mm): 82 | EMC: CISPR 25 class 3 | Light function: Full beam/dipped beam/position light | Cable length (m): 0.18 | No. of LEDs: 9 | Housing mate... More
Depth (mm): 82 | EMC: CISPR 25 class 3 | Light function: Full beam/dip...
€147,36 €121,79 €135,57 €112,04
You save 8%
Wabco 3/2 solenoid valve beluchtend standard open NW 4 mm, 13 bar, 12 V
€478,10 €395,12 €439,85 €363,51
You save 8%
Wabco Trailer control valve with drukbegrenzing 8 bar, M22 x 1,5, NW 10 mm
Wabco
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (mm): 10 | Working pressure (bar): 8 More
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (m...
€581,80 €480,83 €535,26 €442,36
You save 8%
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929 More
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no....
€23,54 €19,45
KS Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
Plate Hi-Lo vane connection 4 mm, Ø 285 mm John Deere
Version: 4 mm, Ø 285 mm More
Version: 4 mm, Ø 285 mm
€80,83 €66,80 €74,36 €61,46
You save 8%
Sauermann Verstelplaat with handle trailer coupling 330 mm rail width
€251,26 €207,65 €231,16 €191,04
You save 8%
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines More
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€79,91 €66,04 €73,52 €60,76
You save 8%
External plate thickness 7 mm, inner 140 mm, outer 251 mm
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 221658 More
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 2...
€137,22 €113,41 €126,24 €104,33
You save 8%
AKS-Dasis Magnetic coupling airco 12 V, Ø 125 mm, poly-V 8 John Deere
AKS-Dasis
12 V Ø 125 mm Poly-V8 More
12 V Ø 125 mm Poly-V8
€389,21 €321,66 €358,07 €295,93
You save 8%
Showing 49 - 96 of 690

John Deere 6120 parts for the linkage, belts and drawbar

A 6120 that has spent years with a plough or cultivator on the rear linkage shows it in the lift arms and bushes. More than 650 John Deere 6120 parts fit this tractor, and the linkage is a good place to start.

If a lift arm has play, look at the bushes first. A bush worn oval lets the arm move sideways and the implement hangs crooked. Always renew the bushes on both sides at once and grease them after fitting so they do not run in dry. Lift arms are listed for the left hand side, for example.

Drawbar, forced steering and ball joints

At the rear there are drawbar balls, automatic drawbars, drawbar frames in John Deere green and forced steering parts. For the tractor's own steering there are ball joints. To check them, have someone turn the steering wheel back and forth with the wheels on the ground. If a joint visibly moves in its housing it is worn out, and after replacing it the toe-in needs resetting.

Belts, charging and lighting

The belt drive is covered by belt kits for tractors without air conditioning and multi-rib belts for tractors with it, so the right one depends on how your tractor is equipped. There are also alternators, work lamps from HELLA and others, hose by the metre, O-rings such as the one for the tank sender, regulator housing gaskets and external plates for the ZF front axle.

An alternator that hums or whines usually has a worn bearing. Take the belt off and spin the pulley by hand, and roughness or play is obvious straight away. Cut hose from the roll square and fit new clamps. If you smell diesel around the tank, look at the tank sender O-ring, which hardens with age and starts to weep when the tank is full.

Finding the right part

The type plate confirms you are working on a 6120. For a lift arm check left or right, for a belt the number of ribs and the length, and nearly every part that comes off carries a reference number to compare against. Brands include GRANIT, HELLA, ROCKINGER, Sauermann and Wabco.

The John Deere 6220, John Deere 6320, John Deere 6420, John Deere 6520, John Deere 6620 and John Deere 6820 in the 6020 series have pages of their own, so you can see per model what fits. For a contractor or a mixed fleet that saves a lot of back and forth. For the full make, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart