Menu
EUR

John Deere 6130 tractor parts & technical data

Whatever job is next on your John Deere 6130, start with more than 550 parts for the 6030 and 6030PR series, such as trailer couplings, lighting and electrics.

584 parts found for John Deere 6130
Show:
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.277,79 €1.882,47 €1.850,84 €1.529,62
You save 19%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, John Deere green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 100 kN. Colour: JD green. Technical data: Kugelkupplung... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.485,41 €1.227,61 €1.194,48 €987,17
You save 20%
Solenoid switch starter motor 12 V, 80 A, 3 schraubkontakt
Version: 12 V / 80 A, 3 screw connections. Additional information: Spulenwiderstand: 3.95-4.15 Temporärer Strom: 800 Amp. More
Version: 12 V / 80 A, 3 screw connections. Additional information: Spu...
€50,38 €41,64 €46,35 €38,31
You save 8%
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Super comfort seat with low-frequency air suspension and 12V compressor. APS: automatic positioning system. Armrests height adjustable and folding. Ad... More
Super comfort seat with low-frequency air suspension and 12V compresso...
€1.991,23 €1.645,64
Work lamp round H3, 12 V John Deere 6130 - 6930
Nominal voltage (V): 12 | Form: Round | Bulb: H3 More
Nominal voltage (V): 12 | Form: Round | Bulb: H3
€481,70 €398,10 €443,16 €366,25
You save 8%
Scharmüller Forced steering K50, 2 ton, 250 mm, left John Deere
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€754,30 €623,39 €693,96 €573,52
You save 8%
Voith Torsion damper M10 x 50 bolts John Deere 5070M - 6920S
€1.065,44 €880,53 €980,20 €810,09
You save 8%
HELLA Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
HELLA
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal v...
€429,84 €355,24 €331,19 €273,71
You save 23%
DANA Spicer Wheel hub final drive front axle 730
€408,30 €337,44
HELLA Alternator 14 V, 120 A, without belt pulley John Deere
HELLA
Additional information: Without pulley | Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 More
Additional information: Without pulley | Nominal values (V / A): 14 / ...
€537,98 €444,61 €414,51 €342,57
You save 23%
Drive shaft length inserted 1600 mm John Deere
€1.243,06 €1.027,32 €1.143,62 €945,14
You save 8%
Wabco Compressor 18 bar, 159 cm³, Ø 75 mm, stroke 36 mm, V-pulley 22,5 mm
Wabco
Operating pressure max.: 18 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Thread:... More
Operating pressure max.: 18 bar. Cylinder capacity: 159 cm³. Speed: 3...
€2.950,63 €2.438,54 €2.827,62 €2.336,88
You save 4%
ROCKINGER Forced steering right K50, Rockinger drawbar frame 787880K01140
ROCKINGER
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hitch support 787880K01140. More
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hit...
€733,91 €606,54 €565,46 €467,33
You save 23%
Scharmüller Drawbar frame prepared draw pendulum 330/25/32 mm, 91,3 kN
Scharmüller
suitable for: John Deere. Series: 6M 6110 - 6145 (Tier 4 Final) MY18. Category: Bearing supports. Version: Prepared for drawbar. Colour: JD green. D-v... More
suitable for: John Deere. Series: 6M 6110 - 6145 (Tier 4 Final) MY18. ...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Replacement key lock number 14610 John Deere, Case IH
Locking number: 14610. Menke no.: 221631. More
Locking number: 14610. Menke no.: 221631.
€21,20 €17,52
Handle John Deere series 6000-6030, 6M, 6MC, 6R
€36,17 €29,89 €33,28 €27,50
You save 8%
Gas strut door- or rear window 130 N, 500 mm John Deere, Case IH
Newtons: 130. A: 500 mm. B: 250 mm. C: 8 mm. D: 8 mm. To fit: door or rear screen. Form: 6. Menke no.: 59787. More
Newtons: 130. A: 500 mm. B: 250 mm. C: 8 mm. D: 8 mm. To fit: door or ...
€35,53 €29,36
Glass for main headlights John Deere 6130-7530 PR
To fit as: John Deere 6130, 6230, 6330, 6430, 6530, 6534, 6630, 6830, 6930, 7430, 7530 More
To fit as: John Deere 6130, 6230, 6330, 6430, 6530, 6534, 6630, 6830,...
€218,76 €180,79 €201,26 €166,33
You save 8%
Work lamp angular H4, 12 V, 55 W John Deere 6130 - 6930
Voltage range (V): 12 | Power (watts): 55 | Form: Rectangular | Bulb: H4 More
Voltage range (V): 12 | Power (watts): 55 | Form: Rectangular | Bulb: ...
€357,52 €295,48
MAHLE Alternator 14 V / 95 A, flange 56 mm John Deere
MAHLE
Belt width (mm) / type: - | Flange size (mm): 56,0 | Nominal voltage (V): 14 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Additional information: C... More
Belt width (mm) / type: - | Flange size (mm): 56,0 | Nominal voltage (...
€514,44 €425,16 €308,11 €254,64
You save 40%
Scharmüller Forced steering K50, 250 mm, both sides, black, 18 kg
Scharmüller
Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour... More
Assembly notes: Both ends | Description: Approved for steering forces ...
€1.222,48 €1.010,31 €1.124,68 €929,49
You save 8%
LED main headlight 12 / 24 V, 155 x 92 x 82 mm, H4, u-bolt John Deere
Depth (mm): 82 | EMC: CISPR 25 class 3 | Light function: Full beam/dipped beam/position light | Cable length (m): 0.18 | No. of LEDs: 9 | Housing mate... More
Depth (mm): 82 | EMC: CISPR 25 class 3 | Light function: Full beam/dip...
€147,36 €121,79 €135,57 €112,04
You save 8%
Wabco Trailer control valve with drukbegrenzing 8 bar, M22 x 1,5, NW 10 mm
Wabco
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (mm): 10 | Working pressure (bar): 8 More
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (m...
€581,80 €480,83 €535,26 €442,36
You save 8%
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929 More
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no....
€23,54 €19,45
KS Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
Plate Hi-Lo vane connection 4 mm, Ø 285 mm John Deere
Version: 4 mm, Ø 285 mm More
Version: 4 mm, Ø 285 mm
€80,83 €66,80 €74,36 €61,46
You save 8%
Sauermann Bolts trailer coupling 38,2 x 31 x 126 mm
€301,01 €248,77 €276,93 €228,87
You save 8%
Sauermann Verstelplaat with handle trailer coupling 330 mm rail width
€251,26 €207,65 €231,16 €191,04
You save 8%
Sauermann Hold-down device trailer coupling 131 x 85,5 mm, Ø 25,5 mm John Deere
€453,16 €374,51 €416,91 €344,55
You save 8%
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines More
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€79,91 €66,04 €73,52 €60,76
You save 8%
External plate thickness 7 mm, inner 140 mm, outer 251 mm
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 221658 More
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 2...
€137,22 €113,41 €126,24 €104,33
You save 8%
AKS-Dasis Magnetic coupling airco 12 V, Ø 125 mm, poly-V 8 John Deere
AKS-Dasis
12 V Ø 125 mm Poly-V8 More
12 V Ø 125 mm Poly-V8
€389,21 €321,66 €358,07 €295,93
You save 8%
MAHLE Alternator 14 V, 90 A, fastening 56 / 10,2 / 90 mm Fendt, John Deere
MAHLE
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Flange size (mm): 56,0 | Charging current (A): 90 | Form: B | Pulley Ø ... More
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 /...
€472,24 €390,28 €282,84 €233,75
You save 40%
Alternator 14 V / 90 A, flange 2 x 56 mm
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Nominal voltage (V): 14 | Additional information: Compact al... More
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | ...
€255,27 €210,97 €234,85 €194,09
You save 8%
Alternator 14 V / 150 A, flange 56 mm
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction of rotation: ↻ | Mounting hole Ø / R (mm): 10.3 / 90.0 | Nominal values (V /... More
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction...
€293,13 €242,26 €269,68 €222,88
You save 8%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 | Nominal voltage (V): 14 | Form: B | Pulley Ø (mm): - | Nominal value... More
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (m...
€215,54 €178,13 €198,30 €163,88
You save 8%
DANA Spicer King pin final drive front axle 740 John Deere 6020 - 6630
€112,98 €93,37 €103,94 €85,90
You save 8%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Scharmüller
Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Co... More
Assembly notes: Anticlockwise | Description: Approved for steering for...
€636,37 €525,93 €585,46 €483,85
You save 8%
LED work lights floodlight 40 W, 108 x 77 mm
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 108 | Dimensions W x H x D (mm): 108 x 77 | Fixing: Screw fixing | Nominal voltag... More
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 1...
€66,47 €54,93 €61,15 €50,54
You save 8%
BorgWarner Turbocharger engine TCD2013 L6, TCD 7.8 L6 Fendt, John Deere
€4.818,15 €3.981,94 €4.617,30 €3.815,95
You save 4%
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
GRAMMER
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): 12 | Seat heater: Yes | Upholstery type: Fabric / new design | Fore/af... More
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board vol...
€5.303,07 €4.382,70 €4.928,82 €4.073,41
You save 7%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
Drive shaft 665 mm John Deere 6090MC, 6110-6430
€1.208,34 €998,63 €1.111,67 €918,74
You save 8%
Scharmüller Drawbar bracket 200 x 120 mm, bore M18, inner width 120 mm, black
Scharmüller
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal width: 120 mm. Version: Brackets. Category: Drawbar. More
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal widt...
€322,05 €266,16 €296,29 €244,86
You save 8%
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Long. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width:... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Showing 49 - 96 of 584

John Deere 6130 parts for cab, hitch and engine

After years of hard work, a 6130 starts to show its age in the cab and at the hitch. This page brings together more than 550 parts for the John Deere 6130, from GRANIT, HELLA, Sauermann, Scharmüller and Walterscheid.

Engine and electrics

Engine work calls for O-rings, for example for the oil pump, along with seals and gaskets such as the one under the oil filler cap. Alternators, sensors, micro relays and multi-rib belts keep the electrics and auxiliary drives running. Bushes are listed too, including those for the mudguards. A multi-rib belt that squeals on a cold start or when the air conditioning kicks in has usually stretched or glazed. When you replace it, check the tensioner and pulleys as well, and make sure no oil or coolant is reaching the belt.

Before working on the electrics, disconnect the battery negative. Pull a micro relay straight out of its socket rather than prising it, or you risk bending the terminals in the fuse box.

Seat and cab

The cab side includes tractor seats, hinges, and seals for the door hinges and handles. With a new seat, check that the mounting pattern matches the old one, and adjust the suspension to your own weight once it is fitted. A properly set seat makes a real difference to your back at the end of a long day. Work lamps and headlights take care of the lighting.

Drawbar frames, ball hitches and forced steering

The rear of the 6130 takes drawbar frames and ball hitch drawbars, and there are forced steering parts for steered trailers. A practical tip: keep the ball of a ball hitch lightly greased and wipe it clean before coupling. Grit on a dry ball wears both the ball and the socket in the drawbar eye, which leads to slack and knocking as you pull away.

Finding the right part

Check the serial plate for 6130. The same range includes the John Deere 6230, 6430, 6530, 6534, 6630, 6830 and 6930, and they look much alike at first glance. So take the reference number from the old part. On an alternator it is on the unit's own plate, on a sensor usually on the body or the connector. For a drawbar frame, compare the mounting points and the rail width.

For other models from the brand, the John Deere parts page lists them all in one place.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart