Menu
EUR

John Deere 6420 tractor parts & technical data

With more than 750 parts, the John Deere 6420 from the 6020 series is well covered here. These include trailer couplings, electrics and lighting.

762 parts found for John Deere 6420
Show:
External plate thickness 7 mm, inner 140 mm, outer 251 mm
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 221658 More
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 2...
€137,22 €113,41 €126,24 €104,33
You save 8%
AKS-Dasis Magnetic coupling airco 12 V, Ø 125 mm, poly-V 8 John Deere
AKS-Dasis
12 V Ø 125 mm Poly-V8 More
12 V Ø 125 mm Poly-V8
€389,21 €321,66 €358,07 €295,93
You save 8%
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€90,40 €74,71 €83,17 €68,73
You save 8%
MAHLE Alternator 14 V, 90 A, fastening 56 / 10,2 / 90 mm Fendt, John Deere
MAHLE
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Flange size (mm): 56,0 | Charging current (A): 90 | Form: B | Pulley Ø ... More
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 /...
€472,24 €390,28 €282,84 €233,75
You save 40%
Alternator 14 V / 90 A, flange 2 x 56 mm
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Nominal voltage (V): 14 | Additional information: Compact al... More
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | ...
€255,27 €210,97 €234,85 €194,09
You save 8%
Alternator 14 V / 150 A, flange 56 mm
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction of rotation: ↻ | Mounting hole Ø / R (mm): 10.3 / 90.0 | Nominal values (V /... More
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction...
€293,13 €242,26 €269,68 €222,88
You save 8%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 | Nominal voltage (V): 14 | Form: B | Pulley Ø (mm): - | Nominal value... More
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (m...
€215,54 €178,13 €198,30 €163,88
You save 8%
SANDEN Airco compressor 12 V, R134a, pulley Ø 120 mm, PV8, 180 ccm oil
SANDEN
Nominal voltage (V): 12 | Oil quantity (ccm): 180 | For compressor: 10PA15C | Additional information: PV8 | Pulley Ø (mm): 120 | Fixing: DM | Refrige... More
Nominal voltage (V): 12 | Oil quantity (ccm): 180 | For compressor: 10...
€651,29 €538,26 €599,19 €495,20
You save 8%
DANA Spicer King pin final drive front axle 740 John Deere 6020 - 6630
€112,98 €93,37 €103,94 €85,90
You save 8%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Scharmüller
Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Co... More
Assembly notes: Anticlockwise | Description: Approved for steering for...
€636,37 €525,93 €585,46 €483,85
You save 8%
LED work lights floodlight 40 W, 108 x 77 mm
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 108 | Dimensions W x H x D (mm): 108 x 77 | Fixing: Screw fixing | Nominal voltag... More
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 1...
€66,47 €54,93 €61,15 €50,54
You save 8%
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
GRAMMER
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): 12 | Seat heater: Yes | Upholstery type: Fabric / new design | Fore/af... More
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board vol...
€5.303,07 €4.382,70 €4.928,82 €4.073,41
You save 7%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, 246 mm, clockwise
€395,10 €326,53 €236,65 €195,58
You save 40%
Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€351,67 €290,64 €323,54 €267,39
You save 8%
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, Ø 83 mm, clockwise
€546,11 €451,33 €420,77 €347,74
You save 23%
Drive shaft 665 mm John Deere 6090MC, 6110-6430
€1.208,34 €998,63 €1.111,67 €918,74
You save 8%
Scharmüller Drawbar bracket 200 x 120 mm, bore M18, inner width 120 mm, black
Scharmüller
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal width: 120 mm. Version: Brackets. Category: Drawbar. More
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal widt...
€322,05 €266,16 €296,29 €244,86
You save 8%
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Long. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width:... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Optibelt Multi-rib belt 8 ribs John Deere, Case IH, New Holland
€114,23 €94,41 €105,09 €86,85
You save 8%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 530 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€3.917,46 €3.237,57
GASKET SET Ø 80 mm John Deere
Dimensions: Ø 80 mm mm. More
Dimensions: Ø 80 mm mm.
€137,65 €113,76 €126,64 €104,66
You save 8%
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Referenc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.018,93 €842,09 €937,42 €774,72
You save 8%
GRAMMER Tractor seat air suspended Maximo COMFORT fabric, seat width 520 mm
GRAMMER
Comfort seat with air suspension and 12V compressor. Armrests height adjustable and folding. Mechanical lumbar support. Backrest tilt adjustment. Fore... More
Comfort seat with air suspension and 12V compressor. Armrests height a...
€1.234,76 €1.020,46
Walterscheid Drawbar support M20, black, John Deere
Walterscheid
Colour: black | Description: Drawbar support that can be mounted securely in the direction of travel at the rear below the gearbox. More
Colour: black | Description: Drawbar support that can be mounted secur...
€638,58 €527,75 €504,86 €417,24
You save 21%
Expander Repair bolt front axle suspension Ø 30 mm, 138 mm, M16 x 1,5 John Deere
Expander
H (mm): 19 | To fit: John Deere | Splayed dimensions (mm): 0 - 2 | A (mm): 138 | C (mm): 47,02 | Ø F (mm): M16 x 1,5 | Type: Special version | G (mm)... More
H (mm): 19 | To fit: John Deere | Splayed dimensions (mm): 0 - 2 | A (...
€575,31 €475,46
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
Version: 4 mm, Ø 295 mm More
Version: 4 mm, Ø 295 mm
€70,35 €58,14 €64,72 €53,49
You save 8%
External plate thickness 2,2 mm, inner 100 mm, outer 146 mm
Version: Thickness: 2.2 mm Inner: 100 mm Outer: 146 mm More
Version: Thickness: 2.2 mm Inner: 100 mm Outer: 146 mm
€56,53 €46,72 €52,01 €42,98
You save 8%
Scharmüller Forced steering K50, 250 mm, both sides, black, 20,06 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Connecti... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Bo...
€1.222,48 €1.010,31 €1.124,68 €929,49
You save 8%
Scharmüller Forced steering K50, 250 mm, left, black, 12 kg John Deere
Scharmüller
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm ... More
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Descriptio...
€636,37 €525,93 €585,46 €483,85
You save 8%
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Scharmüller
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bearing supports | Load capacity (kg): 3000 | Version: Prepared for drawba... More
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Cate...
€1.754,76 €1.450,21 €1.664,38 €1.375,52
You save 5%
Wabco Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
Wabco
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 | Pressure regulator cut-off pressure (bar): 7,3 ±0,2 | Connection: M22 x 1,5 More
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 |...
€625,38 €516,84 €575,35 €475,50
You save 8%
Wabco Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
Wabco
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit: Including - EVOBUS - MERCEDES-BENZ | Inlet connection: 1: M22 x 1,5 | Version:... More
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit...
€65,78 €54,36 €60,52 €50,01
You save 8%
Wabco Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
Wabco
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Opening pressure (bar): p2 + 2,5 | Output pressure (bar): 7,4 + 0,2 | Inlet connecti... More
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Open...
€257,83 €213,08 €237,20 €196,04
You save 8%
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M12 x 1,5, standard open
€353,16 €291,87 €324,91 €268,52
You save 8%
Wabco Trailer control valve mineral oil 0-1 bar, final pressure 20 bar, 2 m³
Wabco
End pressure (bar): 20 | Set pressure (bar): 0-1 | Displacement (m³): 2 More
End pressure (bar): 20 | Set pressure (bar): 0-1 | Displacement (m³):...
€1.905,32 €1.574,64 €1.752,89 €1.448,67
You save 8%
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
Version: Ø 34,5 x 3,5 mm More
Version: Ø 34,5 x 3,5 mm
€6,79 €5,61
Piston Hi-Lo clutch 246 x 292 mm John Deere
Version: 246 x 292 mm More
Version: 246 x 292 mm
€127,79 €105,61
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
Version: 285 x 113 x 3.3 mm, 54 splines More
Version: 285 x 113 x 3.3 mm, 54 splines
€124,79 €103,13 €114,81 €94,88
You save 8%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth More
Version: 292 x 219 x 5,16 mm 87 teeth
€97,35 €80,45 €89,56 €74,02
You save 8%
Sauermann Bolt lock with release John Deere 5070M - 8530
Sauermann
Description: With release More
Description: With release
€298,23 €246,47 €274,37 €226,75
You save 8%
Sauermann Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
€325,63 €269,12 €299,58 €247,59
You save 8%
Sauermann Cast lid Ø 8,2 mm John Deere
€203,66 €168,31 €187,37 €154,85
You save 8%
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth More
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth
€65,27 €53,94 €60,05 €49,63
You save 8%
External plate thickness 10 mm, inner 238 mm, outer 347 mm, 4 teeth
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth More
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth
€128,47 €106,17 €118,19 €97,68
You save 8%
External plate thickness 3 mm, inner 138 mm, outer 215 mm
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€69,85 €57,73 €64,26 €53,11
You save 8%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm More
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€113,18 €93,54 €104,13 €86,05
You save 8%
Showing 97 - 144 of 762

John Deere 6420 parts: belts, cooling and hitching

Before ordering a belt for a John Deere 6420, check one thing: does your tractor have air conditioning? There are multi-rib belts and belt kits for both versions, and because the belt runs a different route, one will not stand in for the other. Look for an air conditioning compressor in the belt drive before you order. This page carries more than 750 John Deere 6420 parts, so details like that matter.

Cooling and engine

A thermostat should never go in without a fresh regulator housing gasket, which you will find here too. If the coolant looks brown or cloudy, flush the system while you are at it. There are also hoses, engine sensors, O-rings such as the one for the tank sender, and seals. Starter motors and alternators take care of starting and charging.

Towing and lifting

Many a John Deere 6420 spends its days in front of a trailer, and the hitch shows it. For that there are drawbars, including automatic ones from ROCKINGER, drawbar frames and forced steering connections, with Sauermann among the drawbar brands. Lift arms cover the linkage, and air brake parts come from Wabco.

Checking the lift arms

Lift arms wear where they pivot. Play at those points leaves an implement hanging crooked or swaying from side to side. When you grease the linkage, check that both lift arms sit level, and replace a bent or worn arm before the play spreads into the rest of the hitch.

Light for long evenings

HELLA work lamps cover work after dark. A flickering lamp is often down to a poor earth or a corroded plug, so check those before replacing the lamp itself. A loose earth lead is quickly put right with a new crimp terminal and a smear of grease.

Finding the right part

The serial number on the type plate is your starting point. For belts, gaskets and thermostats the reference number on the old part is a quick check. With a belt, count the ribs on the old one as well.

The 6020 series

The 6420 belongs to the John Deere 6020 series, SE versions included. The other types in the series each have a page of their own, so you can see per tractor what fits:

The John Deere 6020 and 6420S are part of this series too. For those and every other model, see John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart