Menu
EUR

John Deere 6420 tractor parts & technical data

With more than 750 parts, the John Deere 6420 from the 6020 series is well covered here. These include trailer couplings, electrics and lighting.

762 parts found for John Deere 6420
Show:
External plate thickness 7 mm, inner 140 mm, outer 251 mm
8%
External plate thickness 7 mm, inner 140 mm, outer 251 mm
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 221658
€137,22 €113,41 €126,24 €104,33
 
AKS-Dasis Magnetic coupling airco 12 V, Ø 125 mm, poly-V 8 John Deere
8%
AKS-Dasis
Magnetic coupling airco 12 V, Ø 125 mm, poly-V 8 John Deere
12 V Ø 125 mm Poly-V8
€389,21 €321,66 €358,07 €295,93
 
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
8%
LUK
Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€90,40 €74,71 €83,17 €68,73
 
MAHLE Alternator 14 V, 90 A, fastening 56 / 10,2 / 90 mm Fendt, John Deere
40%
MAHLE
Alternator 14 V, 90 A, fastening 56 / 10,2 / 90 mm Fendt, John Deere
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Fla...
€472,24 €390,28 €282,84 €233,75
 
Alternator 14 V / 90 A, flange 2 x 56 mm
8%
Alternator 14 V / 90 A, flange 2 x 56 mm
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | Pulley Ø (m...
€255,27 €210,97 €234,85 €194,09
 
Alternator 14 V / 150 A, flange 56 mm
8%
Alternator 14 V / 150 A, flange 56 mm
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction of rotati...
€293,13 €242,26 €269,68 €222,88
 
Alternator 14 V, 150 A, flange 55,8 mm
8%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 |...
€215,54 €178,13 €198,30 €163,88
 
SANDEN Airco compressor 12 V, R134a, pulley Ø 120 mm, PV8, 180 ccm oil
8%
SANDEN
Airco compressor 12 V, R134a, pulley Ø 120 mm, PV8, 180 ccm oil
Nominal voltage (V): 12 | Oil quantity (ccm): 180 | For compressor: 10PA15C | Ad...
€651,29 €538,26 €599,19 €495,20
 
DANA Spicer King pin final drive front axle 740 John Deere 6020 - 6630
8%
DANA Spicer
King pin final drive front axle 740 John Deere 6020 - 6630
€112,98 €93,37 €103,94 €85,90
 
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
8%
Scharmüller
Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Assembly notes: Anticlockwise | Description: Approved for steering forces up to ...
€636,37 €525,93 €585,46 €483,85
 
LED work lights floodlight 40 W, 108 x 77 mm
8%
LED work lights floodlight 40 W, 108 x 77 mm
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 108 | Dimen...
€66,47 €54,93 €61,15 €50,54
 
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
7%
GRAMMER
Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): ...
€5.303,07 €4.382,70 €4.928,82 €4.073,41
 
FEBI Hydraulic oil filter HF35474
34%
FEBI
Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
 
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, 246 mm, clockwise
40%
MAHLE
Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, 246 mm, clockwise
€395,10 €326,53 €236,65 €195,58
 
Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
8%
Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€351,67 €290,64 €323,54 €267,39
 
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, Ø 83 mm, clockwise
23%
HELLA
Starter motor 12 V, 3,0 kW, 11 teeth, Ø 83 mm, clockwise
€546,11 €451,33 €420,77 €347,74
 
Drive shaft 665 mm John Deere 6090MC, 6110-6430
8%
Drive shaft 665 mm John Deere 6090MC, 6110-6430
Length: 665 mm.
€1.208,34 €998,63 €1.111,67 €918,74
 
Scharmüller Drawbar bracket 200 x 120 mm, bore M18, inner width 120 mm, black
8%
Scharmüller
Drawbar bracket 200 x 120 mm, bore M18, inner width 120 mm, black
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal width: 120 mm....
€322,05 €266,16 €296,29 €244,86
 
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
4%
Scharmüller
Drawbar frame long 330/25/32, 2000 kg John Deere
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Lon...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
 
Optibelt Multi-rib belt 8 ribs John Deere, Case IH, New Holland
8%
Optibelt
Multi-rib belt 8 ribs John Deere, Case IH, New Holland
€114,23 €94,41 €105,09 €86,85
 
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
8%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
 
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Tractor seat Maximo Professional MSG95AL/731 air suspended
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Option...
€3.917,46 €3.237,57
 
GASKET SET Ø 80 mm John Deere
8%
GASKET SET Ø 80 mm John Deere
Dimensions: Ø 80 mm mm.
€137,65 €113,76 €126,64 €104,66
 
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
8%
Sauermann
Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.018,93 €842,09 €937,42 €774,72
 
GRAMMER Tractor seat air suspended Maximo COMFORT fabric, seat width 520 mm
GRAMMER
Tractor seat air suspended Maximo COMFORT fabric, seat width 520 mm
Comfort seat with air suspension and 12V compressor. Armrests height adjustable ...
€1.234,76 €1.020,46
 
Walterscheid Drawbar support M20, black, John Deere
21%
Walterscheid
Drawbar support M20, black, John Deere
Colour: black | Description: Drawbar support that can be mounted securely in the...
€638,58 €527,75 €504,86 €417,24
 
Expander Repair bolt front axle suspension Ø 30 mm, 138 mm, M16 x 1,5 John Deere
Expander
Repair bolt front axle suspension Ø 30 mm, 138 mm, M16 x 1,5 John Deere
H (mm): 19 | To fit: John Deere | Splayed dimensions (mm): 0 - 2 | A (mm): 138 |...
€575,31 €475,46
 
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
8%
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
Version: 4 mm, Ø 295 mm
€70,35 €58,14 €64,72 €53,49
 
External plate thickness 2,2 mm, inner 100 mm, outer 146 mm
8%
External plate thickness 2,2 mm, inner 100 mm, outer 146 mm
Version: Thickness: 2.2 mm Inner: 100 mm Outer: 146 mm
€56,53 €46,72 €52,01 €42,98
 
Scharmüller Forced steering K50, 250 mm, both sides, black, 20,06 kg
8%
Scharmüller
Forced steering K50, 250 mm, both sides, black, 20,06 kg
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Both ends | ...
€1.222,48 €1.010,31 €1.124,68 €929,49
 
Scharmüller Forced steering K50, 250 mm, left, black, 12 kg John Deere
8%
Scharmüller
Forced steering K50, 250 mm, left, black, 12 kg John Deere
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approve...
€636,37 €525,93 €585,46 €483,85
 
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
5%
Scharmüller
Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bear...
€1.754,76 €1.450,21 €1.664,38 €1.375,52
 
Wabco Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
8%
Wabco
Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 | Pressure ...
€625,38 €516,84 €575,35 €475,50
 
Wabco Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
8%
Wabco
Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit: Including...
€65,78 €54,36 €60,52 €50,01
 
Wabco Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
8%
Wabco
Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Opening pressur...
€257,83 €213,08 €237,20 €196,04
 
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M12 x 1,5, standard open
8%
Wabco
Solenoid valve 3/2-way, 12 V, 1,41 A, M12 x 1,5, standard open
€353,16 €291,87 €324,91 €268,52
 
Wabco Trailer control valve mineral oil 0-1 bar, final pressure 20 bar, 2 m³
8%
Wabco
Trailer control valve mineral oil 0-1 bar, final pressure 20 bar, 2 m³
End pressure (bar): 20 | Set pressure (bar): 0-1 | Displacement (m³): 2
€1.905,32 €1.574,64 €1.752,89 €1.448,67
 
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
Version: Ø 34,5 x 3,5 mm
€6,79 €5,61
 
Piston Hi-Lo clutch 246 x 292 mm John Deere
Piston Hi-Lo clutch 246 x 292 mm John Deere
Version: 246 x 292 mm
€127,79 €105,61
 
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
8%
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
Version: 285 x 113 x 3.3 mm, 54 splines
€124,79 €103,13 €114,81 €94,88
 
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
8%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth
€97,35 €80,45 €89,56 €74,02
 
Sauermann Bolt lock with release John Deere 5070M - 8530
8%
Sauermann
Bolt lock with release John Deere 5070M - 8530
Description: With release
€298,23 €246,47 €274,37 €226,75
 
Sauermann Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
8%
Sauermann
Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
€325,63 €269,12 €299,58 €247,59
 
Sauermann Cast lid Ø 8,2 mm John Deere
8%
Sauermann
Cast lid Ø 8,2 mm John Deere
€203,66 €168,31 €187,37 €154,85
 
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
8%
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth
€65,27 €53,94 €60,05 €49,63
 
External plate thickness 10 mm, inner 238 mm, outer 347 mm, 4 teeth
8%
External plate thickness 10 mm, inner 238 mm, outer 347 mm, 4 teeth
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth
€128,47 €106,17 €118,19 €97,68
 
External plate thickness 3 mm, inner 138 mm, outer 215 mm
8%
External plate thickness 3 mm, inner 138 mm, outer 215 mm
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€69,85 €57,73 €64,26 €53,11
 
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
8%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€113,18 €93,54 €104,13 €86,05
 
Showing 97 - 144 of 762

John Deere 6420 parts: belts, cooling and hitching

Before ordering a belt for a John Deere 6420, check one thing: does your tractor have air conditioning? There are multi-rib belts and belt kits for both versions, and because the belt runs a different route, one will not stand in for the other. Look for an air conditioning compressor in the belt drive before you order. This page carries more than 750 John Deere 6420 parts, so details like that matter.

Cooling and engine

A thermostat should never go in without a fresh regulator housing gasket, which you will find here too. If the coolant looks brown or cloudy, flush the system while you are at it. There are also hoses, engine sensors, O-rings such as the one for the tank sender, and seals. Starter motors and alternators take care of starting and charging.

Towing and lifting

Many a John Deere 6420 spends its days in front of a trailer, and the hitch shows it. For that there are drawbars, including automatic ones from ROCKINGER, drawbar frames and forced steering connections, with Sauermann among the drawbar brands. Lift arms cover the linkage, and air brake parts come from Wabco.

Checking the lift arms

Lift arms wear where they pivot. Play at those points leaves an implement hanging crooked or swaying from side to side. When you grease the linkage, check that both lift arms sit level, and replace a bent or worn arm before the play spreads into the rest of the hitch.

Light for long evenings

HELLA work lamps cover work after dark. A flickering lamp is often down to a poor earth or a corroded plug, so check those before replacing the lamp itself. A loose earth lead is quickly put right with a new crimp terminal and a smear of grease.

Finding the right part

The serial number on the type plate is your starting point. For belts, gaskets and thermostats the reference number on the old part is a quick check. With a belt, count the ribs on the old one as well.

The 6020 series

The 6420 belongs to the John Deere 6020 series, SE versions included. The other types in the series each have a page of their own, so you can see per tractor what fits:

The John Deere 6020 and 6420S are part of this series too. For those and every other model, see John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart