Menu
EUR

John Deere 6430 tractor parts & technical data

More than 600 matching parts for the John Deere 6430, a tractor from the 6030 series. The range includes trailer couplings, lighting and electrics.

627 parts found for John Deere 6430
Show:
MAHLE Alternator 14 V / 95 A, flange 56 mm John Deere
MAHLE
Belt width (mm) / type: - | Flange size (mm): 56,0 | Nominal voltage (V): 14 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Additional information: C... More
Belt width (mm) / type: - | Flange size (mm): 56,0 | Nominal voltage (...
€492,99 €407,43 €308,10 €254,63
You save 38%
Scharmüller Forced steering K50, 2 ton, 250 mm, left John Deere
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€726,45 €600,37
Scharmüller Forced steering K50, 250 mm, both sides, black, 20,06 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Connecti... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Bo...
€1.177,35 €973,02
Scharmüller Forced steering K50, 250 mm, both sides, black, 18 kg
Scharmüller
Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour... More
Assembly notes: Both ends | Description: Approved for steering forces ...
€1.177,35 €973,02
Scharmüller Forced steering K50, 250 mm, left, black, 12 kg John Deere
Scharmüller
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm ... More
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Descriptio...
€612,85 €506,49
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Scharmüller
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bearing supports | Load capacity (kg): 3000 | Version: Prepared for drawba... More
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Cate...
€1.690,00 €1.396,69
Sauermann Trailer coupling hitch pin 38 mm, rail 330 mm, John Deere green
Sauermann
Detent pin Ø (mm): 25 | Colour: Green | Connecting pin (mm): 38 | Rail width (mm): 330 | Drawbar eye: DIN 11026, 11043, 74054 (ISO 8755) = 40 mm | D-... More
Detent pin Ø (mm): 25 | Colour: Green | Connecting pin (mm): 38 | Rai...
€1.189,23 €982,83 €1.075,95 €889,21
You save 10%
Wabco Connector head M22 x 1,5 black aluminum with valve, 8 bar
Wabco
Operating pressure max. (bar): 8 | Version: Black, aluminium, with valve, for vehicles | Vehicle/application: For single-line brake, towing vehicle | ... More
Operating pressure max. (bar): 8 | Version: Black, aluminium, with val...
€92,46 €76,41 €87,80 €72,56
You save 5%
GRANIT Thermostat Ø 54 mm, 82 °C
GRANIT
Ø (mm): 54 | Temperature (°C): 82 More
Ø (mm): 54 | Temperature (°C): 82
€17,95 €14,83
GRANIT O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
GRANIT
Version: Ø 34,5 x 3,5 mm More
Version: Ø 34,5 x 3,5 mm
€6,65 €5,50
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
Version: 285 x 113 x 3.3 mm, 54 splines More
Version: 285 x 113 x 3.3 mm, 54 splines
€119,58 €98,83 €113,60 €93,88
You save 5%
Sauermann Bottom pin kit trailer coupling John Deere
€275,76 €227,90 €261,95 €216,49
You save 5%
Voith Torsion damper M10 x 50 bolts John Deere 5070M - 6920S
€1.072,07 €886,01 €969,95 €801,61
You save 10%
AKS-Dasis Magnetic coupling airco 12 V, Ø 125 mm, poly-V 8 John Deere
AKS-Dasis
12 V Ø 125 mm Poly-V8 More
12 V Ø 125 mm Poly-V8
€372,98 €308,25 €354,30 €292,81
You save 5%
MAHLE Aircon compressor 12 V, Ø 120 mm, 8 grooves, PAG 46 John Deere
MAHLE
Suitable oil: PAG 46 | Pulley Ø (mm): 120 | Refrigerant: R 134a | Nominal voltage (V): 12 | For compressor: 10PA15C | Fixing: DM | Oil quantity (ccm)... More
Suitable oil: PAG 46 | Pulley Ø (mm): 120 | Refrigerant: R 134a | Nom...
€865,73 €715,48 €541,00 €447,11
You save 38%
MAHLE Alternator 14 V, 150 A, flange 56 mm, John Deere
MAHLE
Charging current (A): 150 | Form: B | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 170 | Additional information: Compact alternator, dust-ti... More
Charging current (A): 150 | Form: B | Nominal voltage (V): 14 | Nomina...
€516,84 €427,14 €323,00 €266,94
You save 38%
GRANIT LED work lights spotlight 65 W, 166 x 115 x 95 mm John Deere
GRANIT
Theoretical luminous flux (lm): 5200 | Light colour (K): 6000 | Bulb: LED | Effective luminous flux (lm): 3800 | Dimensions W x H x D (mm): 166 x 115 ... More
Theoretical luminous flux (lm): 5200 | Light colour (K): 6000 | Bulb: ...
€99,46 €82,20 €94,45 €78,06
You save 5%
Crankshaft seal 55,4 x 84 x 8 mm John Deere 5075GL - 6195R
Outer Ø (mm): 84 | Width (mm): 8 | Inner Ø (mm): 55,4 More
Outer Ø (mm): 84 | Width (mm): 8 | Inner Ø (mm): 55,4
€33,50 €27,69
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
GRAMMER
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): 12 | Seat heater: Yes | Upholstery type: Fabric / new design | Fore/af... More
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board vol...
€5.082,00 €4.200,00 €4.827,90 €3.990,00
You save 5%
MAHLE Gear reduction starter 12 V, 4,2 kW, 10 teeth clockwise, flange 51 mm
€552,32 €456,46 €345,15 €285,25
You save 38%
Universal joint 30,2 x 82 mm, bush lubrication
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Bush lubrication. More
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Bush...
€164,61 €136,04 €156,35 €129,21
You save 5%
Track rod 333 mm, M20 x 1,5, M26 x 1,5, taper 23,5 - 26,5 mm
A: 333 mm. C: M20 x 1,5 mm. D: M26 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 333 mm. C: M20 x 1,5 mm. D: M26 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€217,93 €180,11 €207,00 €171,07
You save 5%
GRANIT Ball and axial joint 340 mm, taper 23,4 - 26,4 mm, M20 x 1,5
GRANIT
A: 375 mm. C: M20 x 1,5 mm. D: M26 x 1,5 mm. E: 23,4 mm. F: 26,4 mm. Taper: 23,4 - 26,4 mm. More
A: 375 mm. C: M20 x 1,5 mm. D: M26 x 1,5 mm. E: 23,4 mm. F: 26,4 mm. T...
€218,19 €180,32 €207,25 €171,28
You save 5%
Showing 169 - 192 of 627

John Deere 6430 parts

Plenty of John Deere 6430 tractors spend their working life in front of a trailer, and the more than 600 John Deere 6430 parts on this page reflect that. Alongside engine and cab components there is a solid selection of hitching and towing parts.

Towing and forced steering

For trailers with forced steering there are ball connections for both sides. At the rear you can fit drawbar frames and ball drawbars, including ones from Sauermann and Scharmüller. On forced steering, grease the ball and socket regularly and check the locking clip. Play in that joint stops the trailer tracking cleanly behind the tractor on corners, and the trailer tyres wear out early.

Engine bay and belts

Engine parts include O-rings, for instance for the oil pump, gaskets such as the one for the exhaust gas recirculation valve, seals, sensors and alternators. Multi-rib belts cover the belt drive. When you change a belt, spin the tensioner and idler pulleys by hand. A pulley that feels rough or noisy will chew through a new belt in no time.

Cab, lighting and electrics

The cab is covered with hinges, seals for door hinges and pull handles, and GRAMMER tractor seats. Headlights and work lamps come from HELLA. On the electrical side there are micro relays, and bushes take care of pins and shafts that have developed play.

When a function drops out for no obvious reason, the work lights or the fan for example, a micro relay is a good first suspect. Swap it temporarily with an identical relay from another circuit. If the function comes back, you know exactly where the fault lies. Sagging cab doors are another common annoyance on a busy tractor, and fresh hinges with new seals stop the door from rattling and keep dust out.

Ordering with confidence

Check the type plate before ordering. The serial number tells you exactly which 6430 you are working on. The reference number on the old part is an even more reliable check. Belts, gaskets, relays and alternators nearly always have one, printed or stamped.

The 6030 series

The 6430 is part of the 6030 series, which also includes the 6030PR versions. The other tractors each have a page of their own so you can see per machine what fits:

The John Deere 6534 belongs to this group too. Every other model from the brand is listed under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart