Menu
EUR

John Deere 6506 tractor parts & technical data

For the John Deere 6506 in the 6000/6000SE series the range is wide: more than 500 parts, including lighting, trailer couplings and electrics.

540 parts found for John Deere 6506
Show:
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, John Deere green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 100 kN. Colour: JD green. Technical data: Kugelkupplung... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.423,49 €1.176,44 €1.144,45 €945,83
You save 20%
Micro relay changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks. More
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 ...
€13,60 €11,24
Sauermann Forced steering right ball-Ø 50 mm, 110 x 65 mm John Deere
Sauermann
Tractor type: John Deere 6130, 6330, 6430, 6530, 6630, 6830, 6930, 7730, 7830, 7930, 7430, 7530, 7630 More
Tractor type: John Deere 6130, 6330, 6430, 6530, 6630, 6830, 6930, 773...
€795,33 €657,30 €719,55 €594,67
You save 10%
HELLA Beacon KL 600 H1 orange, Ø 135 mm, push-on pin
HELLA
Mounting type: Pipe socket | Bulb: H1 | Power consumption (W): 55 | Bulbs included: Yes | Type: Halogen | Light function: Rotating | Colour: Yellow | ... More
Mounting type: Pipe socket | Bulb: H1 | Power consumption (W): 55 | Bu...
€139,80 €115,54
HELLA Headlight H4 12 V angular built-in John Deere
HELLA
Type: Einbau | Form: eckig | Bulb: H4 | Version: Universal | Nominal voltage (V): 12 More
Type: Einbau | Form: eckig | Bulb: H4 | Version: Universal | Nominal v...
€30,25 €25,00
Universal joint 30 x 83 mm, 1x outer lubrication / centralised lubrication
A: 30 mm. B: 83 mm. Universal joint size: . Lubrication system: 1 x external lubrication/centralised lubrication. More
A: 30 mm. B: 83 mm. Universal joint size: . Lubrication system: 1 x ex...
€55,39 €45,78 €52,60 €43,47
You save 5%
ROCKINGER Forced steering left K50, Rockinger drawbar frame 787880K01140
ROCKINGER
Lock: K50. Assembly notes: Anticlockwise. To fit: Rockinger ball insert or hitch support 787880K01140. More
Lock: K50. Assembly notes: Anticlockwise. To fit: Rockinger ball inser...
€653,40 €540,00 €525,30 €434,13
You save 20%
Bush camshaft Ø 55,88 x 59,87 x 38,9 mm John Deere
€45,15 €37,31 €42,85 €35,41
You save 5%
Helical gear John Deere
€95,55 €78,97 €90,75 €75,00
You save 5%
GRANIT Collet set John Deere
€3,62 €2,99
ROCKINGER Drawbar without sensor rail 330 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.014,60 €838,51 €776,85 €642,02
You save 23%
LED work lights spotlight 1900 lm, 20 W, 138 x 63 x 60 mm, 12/24 V
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 138 x 63 x 60 mm. Light function: Far-reaching illumination. Effective luminous f... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€49,19 €40,65 €46,70 €38,60
You save 5%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€586,12 €484,40 €556,80 €460,17
You save 5%
ROCKINGER Trailer coupling hitch pin 30,6 mm, rail 330 mm, 2000 kg, black
ROCKINGER
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 40 mm, DIN 11043 40 mm, DIN 74054 40 mm | D-value (kN): 120,0 | Type: RO 850 D | ... More
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 4...
€1.079,32 €892,00 €867,75 €717,15
You save 20%
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€119,54 €98,79 €113,55 €93,84
You save 5%
GRANIT Thread insert for tank filler neck John Deere
GRANIT
Description: For tank filler neck. More
Description: For tank filler neck.
€19,70 €16,28
Bush camshaft Ø 55,88 x 59,87 x 38,9 mm John Deere
€45,15 €37,31 €42,85 €35,41
You save 5%
Valve set for filter head
Description: For filter head. More
Description: For filter head.
€25,85 €21,36
GRANIT Thermostat Ø 54 mm John Deere, Renault
€33,53 €27,71 €31,85 €26,32
You save 5%
Fuel line 108 mm John Deere
Dimensions: Length 108 mm. More
Dimensions: Length 108 mm.
€22,90 €18,93
Showing 25 - 48 of 540

John Deere 6506 parts

Keeping a John Deere 6506 running often comes down to the front axle. The plates in the ZF front axle, the belts at the front of the engine and the output of the alternator are where this tractor tends to ask for attention after years of work. This page lists more than 500 parts that fit the 6506, from GRANIT and from brands such as HELLA, ROCKINGER, Wabco and ZF.

Front axle plates

For the ZF front axle you will find both outer plates and inner plates. When you rebuild a plate pack, count the plates as you strip it and note the order in which inner and outer plates sit. Replace the pack as a set rather than single plates, and check the clearance once it is back together. Fill the axle with the oil specified for it, because the wrong oil makes plates slip or chatter.

Engine, belts and electrics

  • Multi-rib belts for the alternator, water pump and air conditioning drive.
  • Alternators in several versions.
  • O-rings, for example for the oil pump, and gaskets such as the thermostat gasket.
  • The flywheel seal and hoses for the cooling system.
  • Micro relays and headlights.

A multi-rib belt that squeals on a cold start or when the air conditioning kicks in is usually glazed or slack. When you fit a new belt, check the tensioner and pulleys too. A rough tensioner or a damaged pulley groove will chew through a fresh belt in no time.

If the alternator is no longer charging properly, measure the battery voltage with the engine running and inspect the earth connection and the plug at the back of the alternator first. A corroded contact produces the same symptoms as a worn regulator. When a function in the cab stops working while the fuse is fine, a micro relay is often the cause. Swap the suspect relay with an identical one from a circuit that works, and you know straight away.

Cab and drawbar

For the cab there are door gas struts and handles. At the rear you will find ROCKINGER drawbars and bushes for pivot points. If the door no longer stays open in the wind, the gas strut is usually the reason.

Ordering with confidence

Check the type plate and keep the old part to hand. The reference number on it, or the ZF number on axle plates, is a far safer match than the outside diameter alone. The 6506 is part of the John Deere 6000 range, as are the John Deere 6100 and the John Deere 6900. Both have their own page with the parts that fit them, which helps if you look after a contractor fleet or a mixed yard. Other models from the brand are under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart