Menu
EUR

John Deere 6510 tractor parts & technical data

The John Deere 6510 from the 6010/6010SE range is well covered here, with more than 600 parts in groups such as lighting, trailer couplings and electrics.

645 parts found for John Deere 6510
Show:
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, John Deere green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 100 kN. Colour: JD green. Technical data: Kugelkupplung... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.485,41 €1.227,61 €1.194,48 €987,17
You save 20%
Solenoid switch starter motor 12 V, 80 A, 3 schraubkontakt
Version: 12 V / 80 A, 3 screw connections. Additional information: Spulenwiderstand: 3.95-4.15 Temporärer Strom: 800 Amp. More
Version: 12 V / 80 A, 3 screw connections. Additional information: Spu...
€50,38 €41,64 €46,35 €38,31
You save 8%
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Super comfort seat with low-frequency air suspension and 12V compressor. APS: automatic positioning system. Armrests height adjustable and folding. Ad... More
Super comfort seat with low-frequency air suspension and 12V compresso...
€1.991,23 €1.645,64
Scharmüller Forced steering K50, 2 ton, 250 mm, left John Deere
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€754,30 €623,39 €693,96 €573,52
You save 8%
Wabco Silencer Ø 57 mm, height 107 mm, clamp
Wabco
Version: Mounting with clamp Ø 57 mm, height 107 mm More
Version: Mounting with clamp Ø 57 mm, height 107 mm
€123,74 €102,26 €113,84 €94,08
You save 8%
Wabco Trailer control valve 8 bar, M22 x 1,5, screw distance 117 x 117 mm
€809,41 €668,93 €744,66 €615,42
You save 8%
Reservoir radiator John Deere 6100 - 9620T
€160,51 €132,65 €147,67 €122,04
You save 8%
Voith Torsion damper M10 x 50 bolts John Deere 5070M - 6920S
€1.065,44 €880,53 €980,20 €810,09
You save 8%
HELLA Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
HELLA
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal v...
€429,84 €355,24 €331,19 €273,71
You save 23%
HELLA Alternator 14 V, 120 A, without belt pulley John Deere
HELLA
Additional information: Without pulley | Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 More
Additional information: Without pulley | Nominal values (V / A): 14 / ...
€537,98 €444,61 €414,51 €342,57
You save 23%
FEBI Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R
FEBI
Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R More
Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R
€79,98 €66,10 €25,44 €21,02
You save 68%
FEBI Electric cooling fan John Deere 6205, 6505, 6010 - 6810
FEBI
To fit as: John Deere 6205, 6505, 6010, 6010SE, 6110, 6110SE, 6210, 6210SE, 6510, 6510SE, 6610, 6610SE, 6810 More
To fit as: John Deere 6205, 6505, 6010, 6010SE, 6110, 6110SE, 6210, 62...
€403,75 €333,68 €232,81 €192,41
You save 42%
Wabco Compressor 18 bar, 159 cm³, Ø 75 mm, stroke 36 mm, V-pulley 22,5 mm
Wabco
Operating pressure max.: 18 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Thread:... More
Operating pressure max.: 18 bar. Cylinder capacity: 159 cm³. Speed: 3...
€2.950,63 €2.438,54 €2.827,62 €2.336,88
You save 4%
ROCKINGER Forced steering right K50, Rockinger drawbar frame 787880K01140
ROCKINGER
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hitch support 787880K01140. More
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hit...
€733,91 €606,54 €565,46 €467,33
You save 23%
Scharmüller Drawbar frame prepared draw pendulum 330/25/32 mm, 91,3 kN
Scharmüller
suitable for: John Deere. Series: 6M 6110 - 6145 (Tier 4 Final) MY18. Category: Bearing supports. Version: Prepared for drawbar. Colour: JD green. D-v... More
suitable for: John Deere. Series: 6M 6110 - 6145 (Tier 4 Final) MY18. ...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
MAHLE Inlet cover expansion tank 0,45 bar, grommet-Ø 37 mm, 76 x 76 x 37 mm
MAHLE
Neck Ø: 37 mm. Opening pressure: 0,45 bar. Notes: Green. Technical data: 76 x 76 x 37 mm. More
Neck Ø: 37 mm. Opening pressure: 0,45 bar. Notes: Green. Technical da...
€16,49 €13,63
PROBOSS Seat PROBOSS AS3510 air suspended, fabric, 510 mm, 12 V
PROBOSS
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 510 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€1.383,42 €1.143,32
Handle John Deere series 6000-6030, 6M, 6MC, 6R
€36,17 €29,89 €33,28 €27,50
You save 8%
Gas strut door- or rear window 130 N, 500 mm John Deere, Case IH
Newtons: 130. A: 500 mm. B: 250 mm. C: 8 mm. D: 8 mm. To fit: door or rear screen. Form: 6. Menke no.: 59787. More
Newtons: 130. A: 500 mm. B: 250 mm. C: 8 mm. D: 8 mm. To fit: door or ...
€35,53 €29,36
Fender left John Deere 6100-6910S, SE6010-SE6610
€570,46 €471,45 €524,82 €433,74
You save 8%
Scharmüller Drawbar automatic, rail 330 mm, pin Ø 25 mm, 2500 kg, AGCO gray
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 89,3 kN. Colour: AGCO grey. Desc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.340,65 €1.107,98
Reverse gear multifunction unit with direction control
Version: Multifunction unit (with electrical direction of travel control). More
Version: Multifunction unit (with electrical direction of travel contr...
€1.320,29 €1.091,15
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
€2.805,57 €2.318,65 €2.211,65 €1.827,81
You save 21%
Drive shaft 1800 mm John Deere 6415 - 7230
Length (mm): 1800 More
Length (mm): 1800
€1.094,70 €904,71 €1.007,12 €832,33
You save 8%
MAHLE Alternator 14 V / 95 A, flange 56 mm John Deere
MAHLE
Belt width (mm) / type: - | Flange size (mm): 56,0 | Nominal voltage (V): 14 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Additional information: C... More
Belt width (mm) / type: - | Flange size (mm): 56,0 | Nominal voltage (...
€514,44 €425,16 €308,11 €254,64
You save 40%
Sauermann Forced steering ball Ø 50 mm, 110 x 65 mm John Deere
Sauermann
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm): 21 | Colour: Green | Hole pattern (mm): 110 x 65 | Ball Ø (mm): 50 More
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm...
€1.068,48 €883,04 €983,00 €812,40
You save 8%
Scharmüller Forced steering K50, 250 mm, both sides, black, 18 kg
Scharmüller
Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour... More
Assembly notes: Both ends | Description: Approved for steering forces ...
€1.222,48 €1.010,31 €1.124,68 €929,49
You save 8%
LED main headlight 12 / 24 V, 155 x 92 x 82 mm, H4, u-bolt John Deere
Depth (mm): 82 | EMC: CISPR 25 class 3 | Light function: Full beam/dipped beam/position light | Cable length (m): 0.18 | No. of LEDs: 9 | Housing mate... More
Depth (mm): 82 | EMC: CISPR 25 class 3 | Light function: Full beam/dip...
€147,36 €121,79 €135,57 €112,04
You save 8%
Wabco 3/2 solenoid valve beluchtend standard open NW 4 mm, 13 bar, 12 V
€478,10 €395,12 €439,85 €363,51
You save 8%
Wabco Trailer control valve with drukbegrenzing 8 bar, M22 x 1,5, NW 10 mm
Wabco
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (mm): 10 | Working pressure (bar): 8 More
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (m...
€581,80 €480,83 €535,26 €442,36
You save 8%
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929 More
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no....
€23,54 €19,45
Thermostat Ø 54 mm, 82 °C
Ø (mm): 54 | Temperature (°C): 82 More
Ø (mm): 54 | Temperature (°C): 82
€18,75 €15,50
Plate Hi-Lo vane connection 4 mm, Ø 285 mm John Deere
Version: 4 mm, Ø 285 mm More
Version: 4 mm, Ø 285 mm
€80,83 €66,80 €74,36 €61,46
You save 8%
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines More
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€79,91 €66,04 €73,52 €60,76
You save 8%
External plate thickness 7 mm, inner 140 mm, outer 251 mm
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 221658 More
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 2...
€137,22 €113,41 €126,24 €104,33
You save 8%
AKS-Dasis Magnetic coupling airco 12 V, Ø 125 mm, poly-V 8 John Deere
AKS-Dasis
12 V Ø 125 mm Poly-V8 More
12 V Ø 125 mm Poly-V8
€389,21 €321,66 €358,07 €295,93
You save 8%
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimensions (mm): - | Material: Steel More
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ri...
€65,38 €54,03 €60,15 €49,71
You save 8%
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€90,40 €74,71 €83,17 €68,73
You save 8%
Oil sump gasket John Deere engine 6068 Powertech 6.8 L
€31,75 €26,24
MAHLE Alternator 14 V, 90 A, fastening 56 / 10,2 / 90 mm Fendt, John Deere
MAHLE
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Flange size (mm): 56,0 | Charging current (A): 90 | Form: B | Pulley Ø ... More
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 /...
€472,24 €390,28 €282,84 €233,75
You save 40%
Alternator 14 V / 90 A, flange 2 x 56 mm
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Nominal voltage (V): 14 | Additional information: Compact al... More
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | ...
€255,27 €210,97 €234,85 €194,09
You save 8%
SANDEN Airco compressor 12 V, R134a, pulley Ø 120 mm, PV8, 180 ccm oil
SANDEN
Nominal voltage (V): 12 | Oil quantity (ccm): 180 | For compressor: 10PA15C | Additional information: PV8 | Pulley Ø (mm): 120 | Fixing: DM | Refrige... More
Nominal voltage (V): 12 | Oil quantity (ccm): 180 | For compressor: 10...
€651,29 €538,26 €599,19 €495,20
You save 8%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Scharmüller
Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Co... More
Assembly notes: Anticlockwise | Description: Approved for steering for...
€636,37 €525,93 €585,46 €483,85
You save 8%
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
GRAMMER
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): 12 | Seat heater: Yes | Upholstery type: Fabric / new design | Fore/af... More
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board vol...
€5.303,07 €4.382,70 €4.928,82 €4.073,41
You save 7%
FEBI Belt tensioner John Deere 6205, 6505, 6010, 6110, 6210, 6310
FEBI
Belt tensioner John Deere 6205, 6505, 6010, 6110, 6210, 6310 More
Belt tensioner John Deere 6205, 6505, 6010, 6110, 6210, 6310
€151,19 €124,95 €42,93 €35,48
You save 72%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
Universal joint 30 x 83 mm, 1x outer lubrication / centralised lubrication
A: 30 mm. B: 83 mm. Universal joint size: . Lubrication system: 1 x external lubrication/centralised lubrication. More
A: 30 mm. B: 83 mm. Universal joint size: . Lubrication system: 1 x ex...
€57,80 €47,77 €53,18 €43,95
You save 8%
Showing 49 - 96 of 645

John Deere 6510 parts

More than 600 parts are matched to the John Deere 6510 on this page, from GRANIT, HELLA, ROCKINGER, Scharmüller and Wabco. They run from an oil pump O-ring to a cab hinge, and a few groups stand out for this tractor.

Cab doors and hinges

A cab door that drops, will not stay open or rattles over rough ground usually comes down to tired gas struts or a worn hinge. For the 6510 there are door gas struts and cab hinges. Change gas struts with the door held open by a helper or a prop, and fit the new strut with the rod pointing down so its seal stays lubricated. If the hinge pin has worn, the door will sit low and the lock will not line up, which is worth fixing before the seals on the door frame start to suffer.

Engine cooling and belts

  • thermostats and gaskets for the thermostat housing
  • hoses
  • multi-rib belts
  • O-rings, including one for the oil pump
  • alternators and micro relays
  • HELLA headlights

When fitting a new thermostat, always renew the gasket and clean both mating faces thoroughly, since a scrap of old gasket is enough to cause a leak.

Front axle, steering and hitch

The 6510 also has external and internal plates for the front axle, parts for forced steering with ball ends on both sides, and automatic drawbars and drawbar frames from ROCKINGER and Scharmüller. Replace axle plates as a set and on both sides together, keeping external and internal plates in the order they came out.

Confirming the fit

The rating plate tells you it is a 6510. For O-rings, gaskets and plates, the reference number on the old part settles it. If it is unreadable, lay old and new side by side and compare shape, holes and thickness.

With forced steering, the ball ends on both sides are under real load, especially on tight headland turns. Check them for play regularly by rocking the rod by hand, and replace any ball end with play straight away, before it lets the trailer wander and wears the rest of the system.

Other tractors in the 6010 series

The 6510 is part of the John Deere 6010 series, and other tractors from that range have their own page: John Deere 6010, John Deere 6110, John Deere 6210, John Deere 6410 and John Deere 6810. Order for each type from its own page. Running another model from this maker? Browse the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart