Menu
EUR

John Deere 6620 tractor parts & technical data

This page brings together more than 700 parts for the John Deere 6620 from the 6020/6020SE series, such as trailer couplings, lighting and electrics.

741 parts found for John Deere 6620
Show:
LED work lights spotlight 65 W, 166 x 115 x 95 mm John Deere
Theoretical luminous flux (lm): 5200 | Light colour (K): 6000 | Bulb: LED | Effective luminous flux (lm): 3800 | Dimensions W x H x D (mm): 166 x 115 ... More
Theoretical luminous flux (lm): 5200 | Light colour (K): 6000 | Bulb: ...
€103,79 €85,78 €95,49 €78,91
You save 8%
Crankshaft seal 55,4 x 84 x 8 mm John Deere 5075GL - 6195R
Outer Ø (mm): 84 | Width (mm): 8 | Inner Ø (mm): 55,4 More
Outer Ø (mm): 84 | Width (mm): 8 | Inner Ø (mm): 55,4
€34,99 €28,92
FEBI Multi-rib belt Powerband John Deere, Case IH, New Holland
FEBI
To fit as: John Deere More
To fit as: John Deere
€45,25 €37,40 €27,36 €22,61
You save 40%
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.277,79 €1.882,47 €1.850,84 €1.529,62
You save 19%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, John Deere green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 100 kN. Colour: JD green. Technical data: Kugelkupplung... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.485,41 €1.227,61 €1.194,48 €987,17
You save 20%
Fender quarter circle 320 x 1070 mm black, without bracket
Width B: 320 mm. Length L: 1070 mm. Colour: Black. Description: • Manufactured using a rotation process • Material: (PE) polyethylene • Good fle... More
Width B: 320 mm. Length L: 1070 mm. Colour: Black. Description: • Ma...
€59,20 €48,93 €54,46 €45,01
You save 8%
Solenoid switch starter motor 12 V, 80 A, 3 schraubkontakt
Version: 12 V / 80 A, 3 screw connections. Additional information: Spulenwiderstand: 3.95-4.15 Temporärer Strom: 800 Amp. More
Version: 12 V / 80 A, 3 screw connections. Additional information: Spu...
€50,38 €41,64 €46,35 €38,31
You save 8%
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Super comfort seat with low-frequency air suspension and 12V compressor. APS: automatic positioning system. Armrests height adjustable and folding. Ad... More
Super comfort seat with low-frequency air suspension and 12V compresso...
€1.991,23 €1.645,64
Scharmüller Forced steering K50, 2 ton, 250 mm, left John Deere
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€754,30 €623,39 €693,96 €573,52
You save 8%
Wabco Silencer Ø 57 mm, height 107 mm, clamp
Wabco
Version: Mounting with clamp Ø 57 mm, height 107 mm More
Version: Mounting with clamp Ø 57 mm, height 107 mm
€123,74 €102,26 €113,84 €94,08
You save 8%
Wabco Trailer control valve 8 bar, M22 x 1,5, screw distance 117 x 117 mm
€809,41 €668,93 €744,66 €615,42
You save 8%
Voith Torsion damper M10 x 50 bolts John Deere 5070M - 6920S
€1.065,44 €880,53 €980,20 €810,09
You save 8%
HELLA Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
HELLA
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal v...
€429,84 €355,24 €331,19 €273,71
You save 23%
HELLA Alternator 14 V, 120 A, without belt pulley John Deere
HELLA
Additional information: Without pulley | Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 More
Additional information: Without pulley | Nominal values (V / A): 14 / ...
€537,98 €444,61 €414,51 €342,57
You save 23%
FEBI Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R
FEBI
Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R More
Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R
€79,98 €66,10 €25,44 €21,02
You save 68%
Wabco Compressor 18 bar, 159 cm³, Ø 75 mm, stroke 36 mm, V-pulley 22,5 mm
Wabco
Operating pressure max.: 18 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Thread:... More
Operating pressure max.: 18 bar. Cylinder capacity: 159 cm³. Speed: 3...
€2.950,63 €2.438,54 €2.827,62 €2.336,88
You save 4%
ROCKINGER Forced steering right K50, Rockinger drawbar frame 787880K01140
ROCKINGER
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hitch support 787880K01140. More
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hit...
€733,91 €606,54 €565,46 €467,33
You save 23%
Scharmüller Drawbar frame prepared draw pendulum 330/25/32 mm, 91,3 kN
Scharmüller
suitable for: John Deere. Series: 6M 6110 - 6145 (Tier 4 Final) MY18. Category: Bearing supports. Version: Prepared for drawbar. Colour: JD green. D-v... More
suitable for: John Deere. Series: 6M 6110 - 6145 (Tier 4 Final) MY18. ...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
MAHLE Inlet cover expansion tank 0,45 bar, grommet-Ø 37 mm, 76 x 76 x 37 mm
MAHLE
Neck Ø: 37 mm. Opening pressure: 0,45 bar. Notes: Green. Technical data: 76 x 76 x 37 mm. More
Neck Ø: 37 mm. Opening pressure: 0,45 bar. Notes: Green. Technical da...
€16,49 €13,63
PROBOSS Seat PROBOSS AS3510 air suspended, fabric, 510 mm, 12 V
PROBOSS
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 510 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€1.383,42 €1.143,32
Replacement key lock number 14610 John Deere, Case IH
Locking number: 14610. Menke no.: 221631. More
Locking number: 14610. Menke no.: 221631.
€21,20 €17,52
Handle John Deere series 6000-6030, 6M, 6MC, 6R
€36,17 €29,89 €33,28 €27,50
You save 8%
Gas strut door- or rear window 130 N, 500 mm John Deere, Case IH
Newtons: 130. A: 500 mm. B: 250 mm. C: 8 mm. D: 8 mm. To fit: door or rear screen. Form: 6. Menke no.: 59787. More
Newtons: 130. A: 500 mm. B: 250 mm. C: 8 mm. D: 8 mm. To fit: door or ...
€35,53 €29,36
Reverse gear multifunction unit with direction control
Version: Multifunction unit (with electrical direction of travel control). More
Version: Multifunction unit (with electrical direction of travel contr...
€1.320,29 €1.091,15
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
€2.805,57 €2.318,65 €2.211,65 €1.827,81
You save 21%
Drive shaft 1800 mm John Deere 6415 - 7230
Length (mm): 1800 More
Length (mm): 1800
€1.094,70 €904,71 €1.007,12 €832,33
You save 8%
MAHLE Alternator 14 V / 95 A, flange 56 mm John Deere
MAHLE
Belt width (mm) / type: - | Flange size (mm): 56,0 | Nominal voltage (V): 14 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Additional information: C... More
Belt width (mm) / type: - | Flange size (mm): 56,0 | Nominal voltage (...
€514,44 €425,16 €308,11 €254,64
You save 40%
Sauermann Forced steering ball Ø 50 mm, 110 x 65 mm John Deere
Sauermann
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm): 21 | Colour: Green | Hole pattern (mm): 110 x 65 | Ball Ø (mm): 50 More
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm...
€1.068,48 €883,04 €983,00 €812,40
You save 8%
Scharmüller Forced steering K50, 250 mm, both sides, black, 18 kg
Scharmüller
Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour... More
Assembly notes: Both ends | Description: Approved for steering forces ...
€1.222,48 €1.010,31 €1.124,68 €929,49
You save 8%
LED main headlight 12 / 24 V, 155 x 92 x 82 mm, H4, u-bolt John Deere
Depth (mm): 82 | EMC: CISPR 25 class 3 | Light function: Full beam/dipped beam/position light | Cable length (m): 0.18 | No. of LEDs: 9 | Housing mate... More
Depth (mm): 82 | EMC: CISPR 25 class 3 | Light function: Full beam/dip...
€147,36 €121,79 €135,57 €112,04
You save 8%
Wabco 3/2 solenoid valve beluchtend standard open NW 4 mm, 13 bar, 12 V
€478,10 €395,12 €439,85 €363,51
You save 8%
Wabco Trailer control valve with drukbegrenzing 8 bar, M22 x 1,5, NW 10 mm
Wabco
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (mm): 10 | Working pressure (bar): 8 More
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (m...
€581,80 €480,83 €535,26 €442,36
You save 8%
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929 More
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no....
€23,54 €19,45
KS Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
Thermostat Ø 54 mm, 82 °C
Ø (mm): 54 | Temperature (°C): 82 More
Ø (mm): 54 | Temperature (°C): 82
€18,75 €15,50
Plate Hi-Lo vane connection 4 mm, Ø 285 mm John Deere
Version: 4 mm, Ø 285 mm More
Version: 4 mm, Ø 285 mm
€80,83 €66,80 €74,36 €61,46
You save 8%
Sauermann Verstelplaat with handle trailer coupling 330 mm rail width
€251,26 €207,65 €231,16 €191,04
You save 8%
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines More
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€79,91 €66,04 €73,52 €60,76
You save 8%
External plate thickness 7 mm, inner 140 mm, outer 251 mm
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 221658 More
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 2...
€137,22 €113,41 €126,24 €104,33
You save 8%
AKS-Dasis Magnetic coupling airco 12 V, Ø 125 mm, poly-V 8 John Deere
AKS-Dasis
12 V Ø 125 mm Poly-V8 More
12 V Ø 125 mm Poly-V8
€389,21 €321,66 €358,07 €295,93
You save 8%
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€90,40 €74,71 €83,17 €68,73
You save 8%
Oil sump gasket John Deere engine 6068 Powertech 6.8 L
€31,75 €26,24
MAHLE Alternator 14 V, 90 A, fastening 56 / 10,2 / 90 mm Fendt, John Deere
MAHLE
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Flange size (mm): 56,0 | Charging current (A): 90 | Form: B | Pulley Ø ... More
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 /...
€472,24 €390,28 €282,84 €233,75
You save 40%
Alternator 14 V / 90 A, flange 2 x 56 mm
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Nominal voltage (V): 14 | Additional information: Compact al... More
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | ...
€255,27 €210,97 €234,85 €194,09
You save 8%
Showing 49 - 96 of 741

John Deere 6620 parts for the cooling system and beyond

By now most John Deere 6620 tractors have plenty of hours on the clock, and the jobs that come up reflect that: a sticking thermostat, a tired belt, a hose that has gone soft, a seal that weeps. This page lists more than 700 replacement parts that fit the 6620, from GRANIT, HELLA, ROCKINGER, Wabco and Sauermann.

Engine, cooling and belts

For the cooling system there are thermostats with the matching regulator housing gasket, radiator hoses and hose sold by the metre. The belt drive is covered by multi-rib belts and complete belt kits including a pulley. Alternators, an engine oil pressure sensor, O-rings for the oil pump and other seals are here too.

Replacing the thermostat properly

Fit a new gasket on the thermostat housing every time and never reuse the old one. Clean both mating faces thoroughly, since a scrap of old gasket left behind is enough to cause a slow drip. While the system is open, squeeze each radiator hose. If one feels hard and cracked, or soft and swollen, replace it in the same job. Bleed the cooling system after refilling and check the level again once the engine has cooled down.

Hitch, lights and clutch

At the rear there are automatic drawbars, drawbar frames and forced steering parts with a ball at both ends for steered trailers. Work lamps and external clutch plates complete the selection.

Belts and tensioners

A multi-rib belt that squeals on a cold start is either glazed or no longer properly tensioned. When you change it, spin the tensioner by hand, and if it feels rough, replace it at the same time. Whether the tractor has air conditioning or an air compressor decides which belt kit fits, so count the pulleys first.

Making sure it fits

The type plate on your 6620 gives the model and serial number. Engine parts such as the thermostat housing or alternator often carry a reference number as well, and that is what you compare with the product details. For O-rings and hoses, measuring the old part gives extra certainty.

The 6620 sits in the John Deere 6020 series. Each model in that range has a page of its own, handy if a second tractor on the farm needs parts: John Deere 6120, John Deere 6220, John Deere 6320, John Deere 6420, John Deere 6520 and John Deere 6820. Other Deere models on the farm can be found via John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart