Menu
EUR

John Deere 6830 tractor parts & technical data

Part of the 6030 series, the John Deere 6830 is covered here by more than 650 matching parts, including trailer couplings, lighting and electrics.

669 parts found for John Deere 6830
Show:
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 | Nominal voltage (V): 14 | Form: B | Pulley Ø (mm): - | Nominal value... More
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (m...
€215,54 €178,13 €198,30 €163,88
You save 8%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Scharmüller
Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Co... More
Assembly notes: Anticlockwise | Description: Approved for steering for...
€636,37 €525,93 €585,46 €483,85
You save 8%
LED work lights floodlight 40 W, 108 x 77 mm
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 108 | Dimensions W x H x D (mm): 108 x 77 | Fixing: Screw fixing | Nominal voltag... More
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 1...
€66,47 €54,93 €61,15 €50,54
You save 8%
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
GRAMMER
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): 12 | Seat heater: Yes | Upholstery type: Fabric / new design | Fore/af... More
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board vol...
€5.303,07 €4.382,70 €4.928,82 €4.073,41
You save 7%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Long. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width:... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 530 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€3.917,46 €3.237,57
GASKET SET Ø 80 mm John Deere
Dimensions: Ø 80 mm mm. More
Dimensions: Ø 80 mm mm.
€137,65 €113,76 €126,64 €104,66
You save 8%
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Referenc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.018,93 €842,09 €937,42 €774,72
You save 8%
GRAMMER Compressor 12 V MSG93, MSG95, MSG97 John Deere, Fendt, Massey Ferguson
GRAMMER
suitable for: MSG93, MSG95, MSG97. More
suitable for: MSG93, MSG95, MSG97.
€353,37 €292,04 €325,10 €268,68
You save 8%
GRAMMER Tractor seat air suspended Maximo COMFORT fabric, seat width 520 mm
GRAMMER
Comfort seat with air suspension and 12V compressor. Armrests height adjustable and folding. Mechanical lumbar support. Backrest tilt adjustment. Fore... More
Comfort seat with air suspension and 12V compressor. Armrests height a...
€1.234,76 €1.020,46
Walterscheid Drawbar support M20, black, John Deere
Walterscheid
Colour: black | Description: Drawbar support that can be mounted securely in the direction of travel at the rear below the gearbox. More
Colour: black | Description: Drawbar support that can be mounted secur...
€638,58 €527,75 €504,86 €417,24
You save 21%
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
Version: 4 mm, Ø 295 mm More
Version: 4 mm, Ø 295 mm
€70,35 €58,14 €64,72 €53,49
You save 8%
Work lamp round H4, 12 V John Deere 6230 - 7530 PR
Bulb: H4 | Nominal voltage (V): 12 | Form: Round More
Bulb: H4 | Nominal voltage (V): 12 | Form: Round
€459,35 €379,63 €422,60 €349,26
You save 8%
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Scharmüller
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bearing supports | Load capacity (kg): 3000 | Version: Prepared for drawba... More
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Cate...
€1.754,76 €1.450,21 €1.664,38 €1.375,52
You save 5%
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
Version: Ø 34,5 x 3,5 mm More
Version: Ø 34,5 x 3,5 mm
€6,79 €5,61
Piston Hi-Lo clutch 246 x 292 mm John Deere
Version: 246 x 292 mm More
Version: 246 x 292 mm
€127,79 €105,61
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
Version: 285 x 113 x 3.3 mm, 54 splines More
Version: 285 x 113 x 3.3 mm, 54 splines
€124,79 €103,13 €114,81 €94,88
You save 8%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth More
Version: 292 x 219 x 5,16 mm 87 teeth
€97,35 €80,45 €89,56 €74,02
You save 8%
Sauermann Bolt lock with release John Deere 5070M - 8530
Sauermann
Description: With release More
Description: With release
€298,23 €246,47 €274,37 €226,75
You save 8%
Sauermann Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
€325,63 €269,12 €299,58 €247,59
You save 8%
Sauermann Cast lid Ø 8,2 mm John Deere
€203,66 €168,31 €187,37 €154,85
You save 8%
DANA Spicer Synchro unit, complete main shaft Powr- / Command quad John Deere
DANA Spicer
Reference no.: RE286934 More
Reference no.: RE286934
€656,10 €542,23 €603,61 €498,85
You save 8%
External plate thickness 2 mm, inner 134 mm, outer 184 mm, 4 teeth
Version: Thickness: 2 mm Inner: 134 mm Outer: 184 mm 4 teeth More
Version: Thickness: 2 mm Inner: 134 mm Outer: 184 mm 4 teeth
€43,75 €36,16 €40,25 €33,26
You save 8%
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth More
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth
€65,27 €53,94 €60,05 €49,63
You save 8%
External plate thickness 3 mm, inner 138 mm, outer 215 mm
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€69,85 €57,73 €64,26 €53,11
You save 8%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm More
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€113,18 €93,54 €104,13 €86,05
You save 8%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€49,85 €41,20 €45,86 €37,90
You save 8%
Aircon compressor 10PA15C 12 V, pulley Ø 120 mm, 8 grooves
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Refrigerant: R 134a | Oil quantity (ccm): 160 | Referen... More
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 ...
€647,38 €535,02 €595,59 €492,22
You save 8%
Exhaust pipe John Deere 6530 - 7530 PR
€123,50 €102,07 €113,62 €93,90
You save 8%
Getriebegeschwindigkeitssensor Hall sensor John Deere 6150M - 8410T
€176,90 €146,20 €162,75 €134,50
You save 8%
HELLA Alternator 14 V / 150 A, without belt pulley, 7,33 kg
HELLA
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 150 | Charging current (A): 150 More
Nominal voltage (V): 14 | Additional information: Without pulley | Nom...
€749,79 €619,66 €577,70 €477,44
You save 23%
DANA Spicer King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
You save 8%
FEBI Ribbed V-belt John Deere 6820, 6920, 6920S, 6325, 6425, 6330
FEBI
Ribbed V-belt John Deere 6820, 6920, 6920S, 6325, 6425, 6330 More
Ribbed V-belt John Deere 6820, 6920, 6920S, 6325, 6425, 6330
€52,97 €43,78 €18,97 €15,68
You save 64%
FEBI Engine oil filter Ø 92,96 mm, height 150,88 mm, thread M92 x 2,5
€29,97 €24,77 €19,21 €15,88
You save 36%
FEBI Alternator 14 V / 150 A, form B, flange 56,0 mm
FEBI
To fit as: Fendt, Hürlimann, Lamborghini, Same More
To fit as: Fendt, Hürlimann, Lamborghini, Same
€435,60 €360,00 €247,81 €204,80
You save 43%
Scharmüller Drawbar frame standard 330/25/32 mm, 2000 kg, JD green John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Standard. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail wi... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.074,22 €887,79 €1.038,28 €858,08
You save 3%
Scharmüller Hitch support 330/25/32, 2000 kg, John Deere 6000-7000
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Short. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€664,98 €549,57
EGR valve John Deere 6230PR-6930PR, 7430PR, 7530PR
Reference no.: RE543308, RE537142, RE528473, RE532849, RE535293. More
Reference no.: RE543308, RE537142, RE528473, RE532849, RE535293.
€851,27 €703,53 €783,17 €647,25
You save 8%
Top link bracket John Deere
Brand: John Deere. More
Brand: John Deere.
€33,12 €27,37 €30,47 €25,18
You save 8%
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
You save 21%
Scharmüller Drawbar frame standard K80 330/25/32 mm, 4000 kg, JD green John Deere
Scharmüller
To fit as: John Deere Serie 6000, 6010, 6020, 6030, 6M 6090 - 6145 (Tier 4 / Stage V) MY20, 6M 6105 - 6140 (Tier 4 Interim), 6M 6110 - 6145 (Tier 4 Fi... More
To fit as: John Deere Serie 6000, 6010, 6020, 6030, 6M 6090 - 6145 (Ti...
€1.951,65 €1.612,93 €1.865,62 €1.541,83
You save 4%
Bracket
€41,96 €34,68 €38,60 €31,90
You save 8%
Calix Engine preheater, complete Ø 1 5/8" (41,5 mm) John Deere
Calix
To fit as: John Deere 4045, 4055, 4255, 4455, 4755, 4955, 5070M, 5080M, 5090M, 5080R, 5080RN, 5090R, 5090RN, 5100M, 5100R, 5100RN, 5620, 5720, 5820, 6... More
To fit as: John Deere 4045, 4055, 4255, 4455, 4755, 4955, 5070M, 5080M...
€404,22 €334,07 €371,88 €307,34
You save 8%
Replacement glass mirror unheated 280 x 200 mm, radius 1800 mm John Deere
Tractor type: John Deere 6000, 6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400, 6410, 6420, 6505, 6506, 6510, 6520, 6600, 6610,... More
Tractor type: John Deere 6000, 6010, 6100, 6110, 6120, 6200, 6205, 621...
€26,01 €21,50
HELLA Bulb R10W 12 V, 10 W, BA15s - 10 pieces
HELLA
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | Power (watts): 10 More
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | P...
€18,94 €15,65
Showing 97 - 144 of 669

John Deere 6830 parts

More than 650 parts fit the John Deere 6830, covering the engine, the electrics, the cab and a good deal of hitch and trailer equipment. If your 6830 regularly pulls trailers, the hitch equipment and the lighting will be the parts of this page you come back to, so both are described in some detail.

Hitching and forced steering

At the rear there are ball type drawbars, a standard drawbar frame in John Deere green and a forced steering system for both sides, which steers a trailer so that it follows the track of the tractor through a bend. Bushes for the pivot points complete the set. Walterscheid and Scharmüller are among the brands for this part of the tractor.

Worth doing at every major service: check the locking pin of the drawbar. A step or oval wear on the pin means it is time to replace it, and doing so early protects the bore of the hitch itself.

Engine and electrics

For the engine there are O-rings, including those for the oil pump, gaskets such as the one for the exhaust gas recirculation valve, seals and thermostats. There is also an engine oil pressure sensor. If the oil pressure light comes on, connect a separate mechanical gauge and check the real pressure first. When that reading is fine, the sensor is to blame. When it is low, stop the engine straight away, because then the problem lies deeper.

On the electrical side you will find alternators, work lamps, headlights and micro relays. For the cab there are gas struts, seals for the door hinges and pull handles, and a tractor seat. Brands include GRANIT, Sauermann, HELLA, Walterscheid and Scharmüller.

Matching parts to your 6830

Before ordering, compare the reference number on the old part with the details shown with the product. That matters with gaskets and O-rings in particular, which look almost the same at first glance. The type plate on the tractor confirms that you really have a 6830 in front of you.

The 6830 belongs to the John Deere 6030 series. The other models in that series have their own pages with the parts that suit them:

The John Deere 6534 is part of the same series. Parts for the rest of the John Deere range are listed on John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart