Menu
EUR

John Deere 6830 tractor parts & technical data

Part of the 6030 series, the John Deere 6830 is covered here by more than 650 matching parts, including trailer couplings, lighting and electrics.

669 parts found for John Deere 6830
Show:
Alternator 14 V, 150 A, flange 55,8 mm
8%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 |...
€215,54 €178,13 €198,30 €163,88
 
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
8%
Scharmüller
Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Assembly notes: Anticlockwise | Description: Approved for steering forces up to ...
€636,37 €525,93 €585,46 €483,85
 
LED work lights floodlight 40 W, 108 x 77 mm
8%
LED work lights floodlight 40 W, 108 x 77 mm
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 108 | Dimen...
€66,47 €54,93 €61,15 €50,54
 
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
7%
GRAMMER
Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): ...
€5.303,07 €4.382,70 €4.928,82 €4.073,41
 
FEBI Hydraulic oil filter HF35474
34%
FEBI
Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
 
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
4%
Scharmüller
Drawbar frame long 330/25/32, 2000 kg John Deere
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Lon...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
 
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
8%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
 
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Tractor seat Maximo Professional MSG95AL/731 air suspended
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Option...
€3.917,46 €3.237,57
 
GASKET SET Ø 80 mm John Deere
8%
GASKET SET Ø 80 mm John Deere
Dimensions: Ø 80 mm mm.
€137,65 €113,76 €126,64 €104,66
 
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
8%
Sauermann
Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.018,93 €842,09 €937,42 €774,72
 
GRAMMER Compressor 12 V MSG93, MSG95, MSG97 John Deere, Fendt, Massey Ferguson
8%
GRAMMER
Compressor 12 V MSG93, MSG95, MSG97 John Deere, Fendt, Massey Ferguson
suitable for: MSG93, MSG95, MSG97.
€353,37 €292,04 €325,10 €268,68
 
GRAMMER Tractor seat air suspended Maximo COMFORT fabric, seat width 520 mm
GRAMMER
Tractor seat air suspended Maximo COMFORT fabric, seat width 520 mm
Comfort seat with air suspension and 12V compressor. Armrests height adjustable ...
€1.234,76 €1.020,46
 
Walterscheid Drawbar support M20, black, John Deere
21%
Walterscheid
Drawbar support M20, black, John Deere
Colour: black | Description: Drawbar support that can be mounted securely in the...
€638,58 €527,75 €504,86 €417,24
 
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
8%
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
Version: 4 mm, Ø 295 mm
€70,35 €58,14 €64,72 €53,49
 
Work lamp round H4, 12 V John Deere 6230 - 7530 PR
8%
Work lamp round H4, 12 V John Deere 6230 - 7530 PR
Bulb: H4 | Nominal voltage (V): 12 | Form: Round
€459,35 €379,63 €422,60 €349,26
 
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
5%
Scharmüller
Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bear...
€1.754,76 €1.450,21 €1.664,38 €1.375,52
 
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
Version: Ø 34,5 x 3,5 mm
€6,79 €5,61
 
Piston Hi-Lo clutch 246 x 292 mm John Deere
Piston Hi-Lo clutch 246 x 292 mm John Deere
Version: 246 x 292 mm
€127,79 €105,61
 
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
8%
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
Version: 285 x 113 x 3.3 mm, 54 splines
€124,79 €103,13 €114,81 €94,88
 
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
8%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth
€97,35 €80,45 €89,56 €74,02
 
Sauermann Bolt lock with release John Deere 5070M - 8530
8%
Sauermann
Bolt lock with release John Deere 5070M - 8530
Description: With release
€298,23 €246,47 €274,37 €226,75
 
Sauermann Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
8%
Sauermann
Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
€325,63 €269,12 €299,58 €247,59
 
Sauermann Cast lid Ø 8,2 mm John Deere
8%
Sauermann
Cast lid Ø 8,2 mm John Deere
€203,66 €168,31 €187,37 €154,85
 
DANA Spicer Synchro unit, complete main shaft Powr- / Command quad John Deere
8%
DANA Spicer
Synchro unit, complete main shaft Powr- / Command quad John Deere
Reference no.: RE286934
€656,10 €542,23 €603,61 €498,85
 
External plate thickness 2 mm, inner 134 mm, outer 184 mm, 4 teeth
8%
External plate thickness 2 mm, inner 134 mm, outer 184 mm, 4 teeth
Version: Thickness: 2 mm Inner: 134 mm Outer: 184 mm 4 teeth
€43,75 €36,16 €40,25 €33,26
 
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
8%
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth
€65,27 €53,94 €60,05 €49,63
 
External plate thickness 3 mm, inner 138 mm, outer 215 mm
8%
External plate thickness 3 mm, inner 138 mm, outer 215 mm
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€69,85 €57,73 €64,26 €53,11
 
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
8%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€113,18 €93,54 €104,13 €86,05
 
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
8%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 m...
€49,85 €41,20 €45,86 €37,90
 
Aircon compressor 10PA15C 12 V, pulley Ø 120 mm, 8 grooves
8%
Aircon compressor 10PA15C 12 V, pulley Ø 120 mm, 8 grooves
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 | Suitable...
€647,38 €535,02 €595,59 €492,22
 
Exhaust pipe John Deere 6530 - 7530 PR
8%
Exhaust pipe John Deere 6530 - 7530 PR
€123,50 €102,07 €113,62 €93,90
 
Getriebegeschwindigkeitssensor Hall sensor John Deere 6150M - 8410T
8%
Getriebegeschwindigkeitssensor Hall sensor John Deere 6150M - 8410T
Version: Hall-Sensor
€176,90 €146,20 €162,75 €134,50
 
HELLA Alternator 14 V / 150 A, without belt pulley, 7,33 kg
23%
HELLA
Alternator 14 V / 150 A, without belt pulley, 7,33 kg
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal value...
€749,79 €619,66 €577,70 €477,44
 
DANA Spicer King pin final drive front axle 755
8%
DANA Spicer
King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
 
FEBI Ribbed V-belt John Deere 6820, 6920, 6920S, 6325, 6425, 6330
64%
FEBI
Ribbed V-belt John Deere 6820, 6920, 6920S, 6325, 6425, 6330
Ribbed V-belt John Deere 6820, 6920, 6920S, 6325, 6425, 6330
€52,97 €43,78 €18,97 €15,68
 
FEBI Engine oil filter Ø 92,96 mm, height 150,88 mm, thread M92 x 2,5
36%
FEBI
Engine oil filter Ø 92,96 mm, height 150,88 mm, thread M92 x 2,5
€29,97 €24,77 €19,21 €15,88
 
FEBI Alternator 14 V / 150 A, form B, flange 56,0 mm
43%
FEBI
Alternator 14 V / 150 A, form B, flange 56,0 mm
To fit as: Fendt, Hürlimann, Lamborghini, Same
€435,60 €360,00 €247,81 €204,80
 
Scharmüller Drawbar frame standard 330/25/32 mm, 2000 kg, JD green John Deere
3%
Scharmüller
Drawbar frame standard 330/25/32 mm, 2000 kg, JD green John Deere
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Sta...
€1.074,22 €887,79 €1.038,28 €858,08
 
Scharmüller Hitch support 330/25/32, 2000 kg, John Deere 6000-7000
Scharmüller
Hitch support 330/25/32, 2000 kg, John Deere 6000-7000
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Sho...
€664,98 €549,57
 
EGR valve John Deere 6230PR-6930PR, 7430PR, 7530PR
8%
EGR valve John Deere 6230PR-6930PR, 7430PR, 7530PR
Reference no.: RE543308, RE537142, RE528473, RE532849, RE535293.
€851,27 €703,53 €783,17 €647,25
 
Top link bracket John Deere
8%
Top link bracket John Deere
Brand: John Deere.
€33,12 €27,37 €30,47 €25,18
 
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
21%
Walterscheid
Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
 
Scharmüller Drawbar frame standard K80 330/25/32 mm, 4000 kg, JD green John Deere
4%
Scharmüller
Drawbar frame standard K80 330/25/32 mm, 4000 kg, JD green John Deere
To fit as: John Deere Serie 6000, 6010, 6020, 6030, 6M 6090 - 6145 (Tier 4 / Sta...
€1.951,65 €1.612,93 €1.865,62 €1.541,83
 
Bracket
8%
Bracket
€41,96 €34,68 €38,60 €31,90
 
Calix Engine preheater, complete Ø 1 5/8" (41,5 mm) John Deere
8%
Calix
Engine preheater, complete Ø 1 5/8" (41,5 mm) John Deere
To fit as: John Deere 4045, 4055, 4255, 4455, 4755, 4955, 5070M, 5080M, 5090M, 5...
€404,22 €334,07 €371,88 €307,34
 
Replacement glass mirror unheated 280 x 200 mm, radius 1800 mm John Deere
Replacement glass mirror unheated 280 x 200 mm, radius 1800 mm John Deere
Tractor type: John Deere 6000, 6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6...
€26,01 €21,50
 
HELLA Bulb R10W 12 V, 10 W, BA15s - 10 pieces
HELLA
Bulb R10W 12 V, 10 W, BA15s - 10 pieces
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | Power (watt...
€18,94 €15,65
 
Showing 97 - 144 of 669

John Deere 6830 parts

More than 650 parts fit the John Deere 6830, covering the engine, the electrics, the cab and a good deal of hitch and trailer equipment. If your 6830 regularly pulls trailers, the hitch equipment and the lighting will be the parts of this page you come back to, so both are described in some detail.

Hitching and forced steering

At the rear there are ball type drawbars, a standard drawbar frame in John Deere green and a forced steering system for both sides, which steers a trailer so that it follows the track of the tractor through a bend. Bushes for the pivot points complete the set. Walterscheid and Scharmüller are among the brands for this part of the tractor.

Worth doing at every major service: check the locking pin of the drawbar. A step or oval wear on the pin means it is time to replace it, and doing so early protects the bore of the hitch itself.

Engine and electrics

For the engine there are O-rings, including those for the oil pump, gaskets such as the one for the exhaust gas recirculation valve, seals and thermostats. There is also an engine oil pressure sensor. If the oil pressure light comes on, connect a separate mechanical gauge and check the real pressure first. When that reading is fine, the sensor is to blame. When it is low, stop the engine straight away, because then the problem lies deeper.

On the electrical side you will find alternators, work lamps, headlights and micro relays. For the cab there are gas struts, seals for the door hinges and pull handles, and a tractor seat. Brands include GRANIT, Sauermann, HELLA, Walterscheid and Scharmüller.

Matching parts to your 6830

Before ordering, compare the reference number on the old part with the details shown with the product. That matters with gaskets and O-rings in particular, which look almost the same at first glance. The type plate on the tractor confirms that you really have a 6830 in front of you.

The 6830 belongs to the John Deere 6030 series. The other models in that series have their own pages with the parts that suit them:

The John Deere 6534 is part of the same series. Parts for the rest of the John Deere range are listed on John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart