Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

John Deere 7215R tractor parts & technical data

More than 140 parts that fit the John Deere 7215R from the 7R series are listed here, among them trailer couplings, lighting and electrics.

143 parts found for John Deere 7215R
Show:
Scharmüller Adaptor plate rail width 390 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 97,1 kN. Rail width: 390 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 160 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 97,1 kN. Rail width: 390 mm. Hole pat...
€616,67 €509,64 €509,84 €421,35
You save 17%
Telescopic mirror bracket John Deere Series 7R-9560RT
€231,31 €191,17 €212,81 €175,87
You save 8%
Scharmüller Drawbar frame HVLB K80 W390 S32, 120,2 kN, 4000 kg
Scharmüller
suitable for: John Deere. Series: 7R (Tier 3). Category: Bearing supports. Version: Standard. Colour: JD green. D-value: 120,2 kN. Guide width: 32 mm.... More
suitable for: John Deere. Series: 7R (Tier 3). Category: Bearing suppo...
€3.816,95 €3.154,50 €3.561,59 €2.943,46
You save 7%
Oil pressure switch transmission oil pressure
Version: Transmission oil pressure. More
Version: Transmission oil pressure.
€181,19 €149,74 €166,69 €137,76
You save 8%
Walterscheid Flange hitch automatic 37 mm, 140 x 80 mm, M17, 2700 kg, 82,4 kN
€1.414,15 €1.168,72 €1.118,04 €924,00
You save 21%
ROCKINGER Drawbar automatic 48,7 mm, 390 / 25 / 32 mm, 2000 kg, 93,6 kN
€3.095,11 €2.557,94 €2.434,74 €2.012,18
You save 21%
Universal joint 35 x 96,8 mm, maintenance-free
A: 35 mm. B: 96,8 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 35 mm. B: 96,8 mm. Universal joint size: . Lubrication system: Main...
€117,48 €97,09 €108,08 €89,32
You save 8%
Single-cylinder compressor John Deere 7200R-7310R
€1.737,87 €1.436,26 €1.598,84 €1.321,36
You save 8%
Starter ring gear Ø 385/415 mm, 129 teeth John Deere
Version: Ø 385/415, 129 teeth. More
Version: Ø 385/415, 129 teeth.
€101,76 €84,10 €93,62 €77,37
You save 8%
ROCKINGER Drawbar nose weight 1000 / 3000 kg, D-value 89,3 kN, John Deere green
ROCKINGER
Load capacity: 1000 / 3000 kg. D-value: 89,3 kN. Colour: John Deere green. More
Load capacity: 1000 / 3000 kg. D-value: 89,3 kN. Colour: John Deere gr...
€1.450,40 €1.198,68
Tensioning pulley Ø 75 mm, width 40 mm John Deere
€83,36 €68,89 €76,69 €63,38
You save 8%
Pressure sensor SCR-katalysator John Deere
€142,05 €117,40 €130,69 €108,01
You save 8%
Crankshaft conical nose, M20 x 2,5 x 70 mm John Deere
Notes: Please follow the instructions in the installation guide. Please complete the test instruction report contained therein, and return it to garan... More
Notes: Please follow the instructions in the installation guide. Pleas...
€3.014,29 €2.491,15 €2.823,15 €2.333,18
You save 6%
Fuel filter / diesel filters
€122,07 €100,88 €112,30 €92,81
You save 8%
Exhaust pipe John Deere 7200R-7290R
Fan clutch John Deere 7200R-7280R
€699,58 €578,17 €643,61 €531,91
You save 8%
Scharmüller Drawbar inner part 390 mm, coupling pin 38 mm, 2500 kg
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.563,57 €1.292,21 €1.488,48 €1.230,15
You save 5%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.150,89 €951,15 €909,90 €751,99
You save 21%
ROCKINGER Flange hitch automatic deep jaw 36 mm, 140 x 80 mm, M17
ROCKINGER
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 78,2 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Connecting pi... More
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 k...
€1.369,96 €1.132,20 €1.055,53 €872,34
You save 23%
Rocker switch PTO shaft front and rear, button yellow
Version: For front and rear PTO shaft, Connection cable with plug. Reference no.: RE160961. More
Version: For front and rear PTO shaft, Connection cable with plug. Ref...
€131,06 €108,31 €120,58 €99,65
You save 8%
HELLA Xenon bulb D1S 85 V, 35 W, base Pk32d-2
HELLA
Bulb: D1S / 35W. Power: 35 watts. Socket: Pk32d-2. Voltage: 85 V. More
Bulb: D1S / 35W. Power: 35 watts. Socket: Pk32d-2. Voltage: 85 V.
€113,51 €93,81 €109,31 €90,34
You save 4%
Gasket John Deere
ROCKINGER Top drawbar rail 390 mm, pin Ø 25 mm, coupling pin 36 mm
ROCKINGER
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 36 mm. Load capacity: 2000 kg. D-value: 98,1 kN. Colour: Black. Drawbar ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.939,41 €1.602,82 €1.544,28 €1.276,26
You save 20%
Seal John Deere 7R, 8R/8RT, 8000-8030
€35,40 €29,26 €32,57 €26,92
You save 8%
Shim hood John Deere
LED work lights high-beam headlight 30 W, 3500 lm, 190 x 70 x 108 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Close-range/far-reaching illumination. Dimension... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€82,01 €67,78 €75,45 €62,35
You save 8%
LED work lights spotlight 24 W, 2200 lm, 190 x 105 x 74 mm
Nominal voltage: 12 / 24 V. Voltage range: 9 - 28 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Installation location:... More
Nominal voltage: 12 / 24 V. Voltage range: 9 - 28 V. Bulb: LED. Bulbs ...
€335,61 €277,36 €308,76 €255,17
You save 8%
Cobo Headlight left / right 12 V, 60/55 W H4, attachment upright
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Light function: Dipped beam, full beam. Additional information: Verti... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€169,33 €139,94 €155,78 €128,75
You save 8%
Thrust bearing John Deere
€37,84 €31,27 €34,81 €28,77
You save 8%
Sleeve John Deere 7200R-8530
Sauermann Trailer coupling rail 390 mm, coupling pin 38 mm, 2500 kg
Sauermann
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 120,9 kN. Colour: Black. Referen... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.231,68 €1.017,92 €1.133,15 €936,48
You save 8%
Walterscheid Drawbar support M16 black John Deere
Walterscheid
Colour: black. Description: Drawbar support that can be mounted securely in the direction of travel at the rear below the gearbox.. Included in delive... More
Colour: black. Description: Drawbar support that can be mounted secure...
€377,53 €312,01 €298,48 €246,68
You save 21%
HELLA Beacon H1 KL Rota Compact 12 V, 55 W, Ø 133 mm, 217 mm, push-on pin
HELLA
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 133 mm. Total height: 217 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€83,28 €68,83 €80,21 €66,29
You save 4%
Showing 97 - 143 of 143

John Deere 7215R parts for heavy towing

Nobody buys a 7215R to pull a light trailer. Steered low loaders, big dump trailers and tankers on a fixed drawbar need a solid hitch setup, and that is where this page puts its weight. Of the more than 140 parts that fit the John Deere 7215R, many deal with hitching and towing. Manufacturers include Scharmüller, ROCKINGER, Sauermann, Walterscheid and GRANIT.

Forced steering and the hitch beneath it

A steered trailer axle needs a second link to the tractor alongside the ball or hook. For that you will find forced steering parts here, such as an insert for a Pick-Up Hitch and an inner part connecting the ball to the steering rod. Underneath sit the drawbars, drawbar frames, support plates and adapter plates. For implements with a drawbar eye there are flange hitches, and a drawbar support takes the strain out of lining up a heavy drawbar.

Air brakes to the trailer

Trailers with air brakes run two lines back from the tractor, and connector heads for those lines are available on this page. Keep the dust caps shut whenever nothing is coupled, and each time you uncouple, check that the rubber sealing ring in the head is intact. A split ring hisses audibly and makes the compressor work harder than it should. And never swap the colours, red is supply and yellow is brake.

Driving clutch plates, lights and small parts

For the driving clutch there are internal and external plates. Replace them as a full pack, and soak new friction plates in the correct oil for a while before fitting so they do not run in dry. You will also find LED work lights in several shapes, O-rings for the fuel line, sealing rings and telescopic mirror arms, which earn their keep on the road with wide implements.

Typ number and the 7R series

The 7215R belongs to the John Deere 7R series. The Typ number and serial number on the type plate tell you exactly which machine you have. For hitch parts, also measure the rail width and hole pattern of what is fitted now, and look for a reference number on old clutch plates or a lamp housing.

Other tractors in the series each have their own page:

The rest of the make is gathered under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart