Menu
EUR

John Deere 7530 tractor parts & technical data

John Deere 7530 owners can pick from more than 500 parts here. Trailer couplings, lighting and electrics lead the range for the 7030 and 7030PR series.

538 parts found for John Deere 7530
Show:
Sauermann Forced steering left cranked downwards, ball-Ø 50 mm
5%
Sauermann
Forced steering left cranked downwards, ball-Ø 50 mm
Assembly notes: Anticlockwise. Hole Ø: 25 mm. Colour: Green. Hole pattern: 110 x...
€1.101,87 €910,64 €1.046,75 €865,08
 
GRANIT Sensor speed PTO shaft front and rear
10%
GRANIT
Sensor speed PTO shaft front and rear
Version: For front and rear PTO shaft.
€90,56 €74,84 €81,90 €67,69
 
HELLA Replacement cover orange with optics, test mark E4 6509 ECE
HELLA
Replacement cover orange with optics, test mark E4 6509 ECE
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional information: • With...
€42,40 €35,04
 
Headlight center 12 V, 55 W H3/H7/H11, dipped beam/main beam, built-in
Headlight center 12 V, 55 W H3/H7/H11, dipped beam/main beam, built-in
Bulb: 12V/55W/H7, 12V/55W/H11, 12V55W / H3. Installation location: Centre. Nomin...
€828,55 €684,75
 
Reflector round red Ø 61 mm, bonded
Reflector round red Ø 61 mm, bonded
Form: Round. Mounting type: Bonded. Colour: Red. Total Ø: 61 mm. Material: Plast...
€2,39 €1,98
 
HELLA Rubber plugs push-on pin DIN/ISO 14620
HELLA
Rubber plugs push-on pin DIN/ISO 14620
Material: Rubber. To fit: Socket pipes. Additional information: • To protect the...
€8,55 €7,07
 
GRANIT Start safety relay 12 V, 70 A, 4-pin, blade terminal 6,3 mm
GRANIT
Start safety relay 12 V, 70 A, 4-pin, blade terminal 6,3 mm
Version: 12 V / 70 A, With bracket, 4-pin, blade terminal 6.3 mm.
€21,55 €17,81
 
HELLA Relays changeover contact 12 V, 30 - 40 A, 5-pin, 6,3 mm
HELLA
Relays changeover contact 12 V, 30 - 40 A, 5-pin, 6,3 mm
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 mm.
€13,45 €11,12
 
GRANIT Temperature sensor coolant M14 x 1,5
5%
GRANIT
Temperature sensor coolant M14 x 1,5
Version: Thread: M14 x 1.5.
€98,41 €81,33 €93,45 €77,23
 
Position sensor front axle TLS
5%
Position sensor front axle TLS
Version: Front axle TLS.
€81,03 €66,97 €76,95 €63,60
 
GRANIT Contact switch differential lock hydraulic
10%
GRANIT
Contact switch differential lock hydraulic
Version: Hydraulic differential lock switch.
€61,14 €50,53 €55,30 €45,70
 
Brake light switch mechanical with plug connection
Brake light switch mechanical with plug connection
Version: With plug connection.
€109,35 €90,37
 
Mirror unheated 296 x 215 mm, rod Ø 18 - 24 mm John Deere
5%
Mirror unheated 296 x 215 mm, rod Ø 18 - 24 mm John Deere
Tractor type: John Deere 6000, 6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6...
€52,78 €43,62 €50,10 €41,41
 
External plate thickness 3 mm, inner 238 mm, outer 333,9 mm, 8 teeth
5%
External plate thickness 3 mm, inner 238 mm, outer 333,9 mm, 8 teeth
Version: Thickness: 3 mm Inner: 238 mm Outer: 333.9 mm 8 teeth
€66,79 €55,20 €63,45 €52,44
 
GRANIT Work lamp round H4, 12 V John Deere 6230 - 7530 PR
5%
GRANIT
Work lamp round H4, 12 V John Deere 6230 - 7530 PR
Bulb: H4 | Nominal voltage (V): 12 | Form: Round
€440,20 €363,80 €418,15 €345,58
 
Scharmüller Support plates ball 80, 90 kN, 1070 x 270 mm, 3 heart, 107 kg
Scharmüller
Support plates ball 80, 90 kN, 1070 x 270 mm, 3 heart, 107 kg
Detent pin Ø (mm): 25 | Rail width (mm): 390 | Thickness (mm): 50 | Number of he...
€2.227,95 €1.841,28
 
Scharmüller Support plates ball 80, 1070 x 270 mm, thickness 50 mm, 90 kN
Scharmüller
Support plates ball 80, 1070 x 270 mm, thickness 50 mm, 90 kN
Length (mm): 1070 | D-value (kN): 90 | Category: Support plates | Load capacity ...
€2.277,00 €1.881,82
 
Wabco Repair set compressor M26 x 1,5 Fendt, John Deere
5%
Wabco
Repair set compressor M26 x 1,5 Fendt, John Deere
To fit: 411 141 500 0, 411 141 640 0/7, 411 141 711 0, 411 141 713 0 | Connectio...
€148,61 €122,82 €141,15 €116,65
 
Connector head M16 x 1,5 red, supply line, vehicle
Connector head M16 x 1,5 red, supply line, vehicle
Application: Vehicle | Connection thread: M16 x 1.5 | Version: Red, supply line ...
€23,80 €19,67
 
O-ring 12,3 x 3,5 mm John Deere 5080 - 7930
O-ring 12,3 x 3,5 mm John Deere 5080 - 7930
Version: Ø 12,3 x 3,5 mm
€2,95 €2,44
 
Sauermann Wear plate trailer coupling HS 1710-1KUD/3KUD
5%
Sauermann
Wear plate trailer coupling HS 1710-1KUD/3KUD
€172,30 €142,40 €163,65 €135,25
 
Sauermann Locking bolt set trailer coupling 330 mm rail width
5%
Sauermann
Locking bolt set trailer coupling 330 mm rail width
€205,09 €169,50 €194,80 €160,99
 
Sauermann Top pin kit trailer coupling Ø 25 x 107 mm John Deere
5%
Sauermann
Top pin kit trailer coupling Ø 25 x 107 mm John Deere
€109,14 €90,20 €103,65 €85,66
 
Sauermann Hold-down device trailer coupling 131 x 85,5 mm, Ø 25,5 mm John Deere
10%
Sauermann
Hold-down device trailer coupling 131 x 85,5 mm, Ø 25,5 mm John Deere
€455,98 €376,84 €412,55 €340,95
 
Showing 289 - 312 of 538

John Deere 7530 parts: electrics, engine and cab

An oil pressure warning on a John Deere 7530 should never be ignored, but it is not always the engine. The sender can fail too. This page lists more than 500 parts for the 7530, including engine oil pressure sensors, alternators, micro relays and work lamps from HELLA among other brands.

Check before you change the sensor

When the oil pressure light comes on, stop the engine and check the oil level first. If that is fine, fit a mechanical test gauge in place of the sensor and start the engine briefly. Good pressure on the gauge means the sensor or its wiring is at fault. Low pressure means the problem is inside the engine, and a new sensor will only hide it. Clean the connector and check the earth before you blame the part.

Seals, cab and transmission

  • O-rings for the oil pump and other O-rings
  • Gaskets, including one for the exhaust gas recirculation valve
  • Seals for door hinges and pull handles
  • Gas struts for the door and cab hinges
  • Internal and external plates and bushes

At the back of the tractor

For towing there are ball drawbars, drawbar frames in John Deere green and forced steering for trailers with a steered axle. Sauermann, Walterscheid and Scharmüller are among the makers here, next to GRANIT.

Finding the part that fits

The type plate on your tractor shows the model and serial number, which is the first thing to check. Read the reference number off the part you are replacing and compare it with the number listed for each product. When rebuilding a clutch pack, count the internal and external plates as you take them out so you can order the right quantity.

Rebuilding a clutch pack

Soak new friction plates in the oil the transmission will run on before fitting them, so the lining is fully wet. Renew internal and external plates as a set, keep them in the same order as the old pack and check the steel plates for heat marks or distortion. A blued or warped steel plate will spoil a new set quickly. If draughts or a door that will not stay open are bothering you, the cab door gas strut, the hinges and the hinge seals are covered as well.

Other tractors in the 7030 series

The 7530 shares its series with other models, each on a page of its own: the John Deere 7430 and the John Deere 7730. The 7830 also belongs to this series. Check each tractor on its own page before ordering. Parts for the rest of the Deere line-up sit under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart