Menu
EUR

John Deere 7530 tractor parts & technical data

John Deere 7530 owners can pick from more than 500 parts here. Trailer couplings, lighting and electrics lead the range for the 7030 and 7030PR series.

538 parts found for John Deere 7530
Show:
DANA Spicer Synchro unit, complete main shaft Powr- / Command quad John Deere
5%
DANA Spicer
Synchro unit, complete main shaft Powr- / Command quad John Deere
Reference no.: RE286934
€628,75 €519,63 €597,30 €493,64
 
External plate thickness 2 mm, inner 134 mm, outer 184 mm, 4 teeth
5%
External plate thickness 2 mm, inner 134 mm, outer 184 mm, 4 teeth
Version: Thickness: 2 mm Inner: 134 mm Outer: 184 mm 4 teeth
€41,93 €34,65 €39,80 €32,89
 
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
5%
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€76,58 €63,29 €72,75 €60,12
 
External plate thickness 6 mm, inner 247 mm, outer 329 mm
5%
External plate thickness 6 mm, inner 247 mm, outer 329 mm
Version: thickness = 6 mm inner = 247 mm outer = 329 mm
€130,93 €108,21 €124,35 €102,77
 
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
5%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€108,46 €89,64 €103,00 €85,12
 
GRANIT Filter dryer 190 mm, #6 o-ring John Deere 6020 - 6920
5%
GRANIT
Filter dryer 190 mm, #6 o-ring John Deere 6020 - 6920
Weight (g): 400 | Length (mm): 190 | Connection thread: F/M | Thread: #6 O-ring
€52,79 €43,63 €50,15 €41,45
 
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
5%
LUK
Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€86,64 €71,60 €82,30 €68,02
 
MAHLE Alternator 14 V, 200 A, flange 56 mm, John Deere
38%
MAHLE
Alternator 14 V, 200 A, flange 56 mm, John Deere
Belt width (mm) / type: - | Flange size (mm): 56,0 | Additional information: Com...
€673,37 €556,50 €420,85 €347,81
 
MAHLE Alternator 14 V, 120 A, fastening 56 / 10,2 / 90 mm John Deere
38%
MAHLE
Alternator 14 V, 120 A, fastening 56 / 10,2 / 90 mm John Deere
Direction of rotation: ↻ | Charging current (A): 120 | Flange size (mm): 56,0 | ...
€498,83 €412,26 €311,75 €257,64
 
Alternator 14 V, 150 A, flange 55,8 mm
5%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 |...
€206,56 €170,71 €196,20 €162,15
 
GRANIT Getriebegeschwindigkeitssensor Hall sensor John Deere 6150M - 8410T
5%
GRANIT
Getriebegeschwindigkeitssensor Hall sensor John Deere 6150M - 8410T
Version: Hall-Sensor
€169,52 €140,10 €161,00 €133,06
 
Cobo Reflector John Deere 5085M - 7530 PR
Cobo
Reflector John Deere 5085M - 7530 PR
€6,80 €5,62
 
HELLA Alternator 14 V / 150 A, without belt pulley, 7,25 kg
20%
HELLA
Alternator 14 V / 150 A, without belt pulley, 7,25 kg
Nominal values (V / A): 14 / 150 | Charging current (A): 150 | Nominal voltage (...
€622,63 €514,57 €500,55 €413,68
 
HELLA Alternator 14 V / 150 A, without belt pulley, 7,33 kg
20%
HELLA
Alternator 14 V / 150 A, without belt pulley, 7,33 kg
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal value...
€718,53 €593,83 €577,70 €477,44
 
DANA Spicer Seal kit steering front axle 745
5%
DANA Spicer
Seal kit steering front axle 745
€345,89 €285,86 €328,55 €271,53
 
DANA Spicer King pin final drive front axle 755
5%
DANA Spicer
King pin final drive front axle 755
€109,73 €90,69 €104,20 €86,12
 
DANA Spicer O-ring brake system front axle 745, 6 g
DANA Spicer
O-ring brake system front axle 745, 6 g
€3,73 €3,08
 
LED work lights floodlight 40 W, 108 x 77 mm
5%
LED work lights floodlight 40 W, 108 x 77 mm
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 108 | Dimen...
€63,69 €52,64 €60,50 €50,00
 
HELLA Alternator 14 V, 120 A, without belt pulley John Deere
20%
HELLA
Alternator 14 V, 120 A, without belt pulley John Deere
Additional information: Without pulley | Nominal values (V / A): 14 / 120 | Char...
€515,56 €426,08 €414,51 €342,57
 
Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32 mm
5%
Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32 mm
€361,75 €298,97 €343,65 €284,01
 
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, clockwise, mounting Ø 89 mm
20%
HELLA
Starter motor 12 V, 3,0 kW, 11 teeth, clockwise, mounting Ø 89 mm
€533,07 €440,55 €428,55 €354,17
 
Ball joint 230 mm, taper 29 - 31 mm, M28 x 1,5 / M28 x 1,5
5%
Ball joint 230 mm, taper 29 - 31 mm, M28 x 1,5 / M28 x 1,5
A: 230 mm. C: M28 x 1,5 mm. D: M28 x 1,5 mm. E: 29 mm. F: 31 mm. Taper: 29 - 31 ...
€124,17 €102,62 €117,95 €97,48
 
GRANIT Seal cover brake cylinder John Deere
GRANIT
Seal cover brake cylinder John Deere
€18,20 €15,04
 
Showing 313 - 336 of 538

John Deere 7530 parts: electrics, engine and cab

An oil pressure warning on a John Deere 7530 should never be ignored, but it is not always the engine. The sender can fail too. This page lists more than 500 parts for the 7530, including engine oil pressure sensors, alternators, micro relays and work lamps from HELLA among other brands.

Check before you change the sensor

When the oil pressure light comes on, stop the engine and check the oil level first. If that is fine, fit a mechanical test gauge in place of the sensor and start the engine briefly. Good pressure on the gauge means the sensor or its wiring is at fault. Low pressure means the problem is inside the engine, and a new sensor will only hide it. Clean the connector and check the earth before you blame the part.

Seals, cab and transmission

  • O-rings for the oil pump and other O-rings
  • Gaskets, including one for the exhaust gas recirculation valve
  • Seals for door hinges and pull handles
  • Gas struts for the door and cab hinges
  • Internal and external plates and bushes

At the back of the tractor

For towing there are ball drawbars, drawbar frames in John Deere green and forced steering for trailers with a steered axle. Sauermann, Walterscheid and Scharmüller are among the makers here, next to GRANIT.

Finding the part that fits

The type plate on your tractor shows the model and serial number, which is the first thing to check. Read the reference number off the part you are replacing and compare it with the number listed for each product. When rebuilding a clutch pack, count the internal and external plates as you take them out so you can order the right quantity.

Rebuilding a clutch pack

Soak new friction plates in the oil the transmission will run on before fitting them, so the lining is fully wet. Renew internal and external plates as a set, keep them in the same order as the old pack and check the steel plates for heat marks or distortion. A blued or warped steel plate will spoil a new set quickly. If draughts or a door that will not stay open are bothering you, the cab door gas strut, the hinges and the hinge seals are covered as well.

Other tractors in the 7030 series

The 7530 shares its series with other models, each on a page of its own: the John Deere 7430 and the John Deere 7730. The 7830 also belongs to this series. Check each tractor on its own page before ordering. Parts for the rest of the Deere line-up sit under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart