Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

John Deere 8220 tractor parts & technical data

Running a John Deere 8220 from the 8020 series? Pick from more than 200 matching parts here, including trailer couplings, lighting and electrics.

222 parts found for John Deere 8220
Show:
ROCKINGER Forced steering left K50, Rockinger drawbar frame 787880K01140
ROCKINGER
Lock: K50. Assembly notes: Anticlockwise. To fit: Rockinger ball insert or hitch support 787880K01140. More
Lock: K50. Assembly notes: Anticlockwise. To fit: Rockinger ball inser...
€681,82 €563,49 €525,33 €434,16
You save 23%
GRAMMER Tractor seat Maximo Dynamic DDS air suspended fabric 550 mm
GRAMMER
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 mm. Joystick c... More
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabri...
€3.180,38 €2.628,41
Borg Warner Fan clutch John Deere 8120-8320, 8120T-8320T
€1.256,32 €1.038,28 €1.056,83 €873,41
You save 16%
Valve seat insert John Deere Series 11-9120, CTS 9650, WTS 9640-9680
V-belt tensioner Ø 74 mm, 39,25 mm wide, 20,3 Nm John Deere, Renault
Rail pressure valve John Deere
€351,43 €290,44 €323,32 €267,20
You save 8%
Sealing washer fuel line Ø 12,17 x 17,72 x 9,3 mm John Deere
Dimensions: Ø 12.17 x 17.72 x 9.3 mm. Description: For fuel line. More
Dimensions: Ø 12.17 x 17.72 x 9.3 mm. Description: For fuel line.
€5,39 €4,45
Angled threaded fitting 90° John Deere
€15,66 €12,94
V-belt tensioner Ø 73 mm, 35,31 mm wide, 56,5 Nm John Deere, Case IH
€294,50 €243,39 €270,94 €223,92
You save 8%
Fuel filter outer-Ø 112 mm, height 156 mm, thread 1-14 UNS-2B
Outer Ø: 112 mm. Height: 156 mm. Connection thread A: 1-14 UNS-2B. More
Outer Ø: 112 mm. Height: 156 mm. Connection thread A: 1-14 UNS-2B.
€203,22 €167,95 €186,96 €154,51
You save 8%
Air hose intercooler Ø 76,2 mm, 142 mm John Deere 7820-8520T
Inner Ø: 76,2 mm. Length: 142 mm. More
Inner Ø: 76,2 mm. Length: 142 mm.
€119,98 €99,16 €110,38 €91,22
You save 8%
Collet set John Deere
O-ring Ø 9,2 x 2,6 mm
Dimensions: Ø 9.2 x 2.6 mm. More
Dimensions: Ø 9.2 x 2.6 mm.
€1,13 €0,93
Rear-view mirror 311 x 226 mm, rod-Ø 18 - 22 mm John Deere
Width: 226 mm. Length: 311 mm. Rod Ø: 18 - 22 mm. More
Width: 226 mm. Length: 311 mm. Rod Ø: 18 - 22 mm.
€514,40 €425,12 €473,25 €391,11
You save 8%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.150,89 €951,15 €909,90 €751,99
You save 21%
Scharmüller Pick-Up Hitch einsätze 80 shank 45 x 70 mm, bore 25 mm John Deere
Scharmüller
Shaft cross section W x H: 45 x 70 mm. Overhang: 390 mm. D-value: 86,1 kN. Hole spacing: 150 mm. Load capacity: 3000 kg. Hole: 25 mm. Length: 469 mm. ... More
Shaft cross section W x H: 45 x 70 mm. Overhang: 390 mm. D-value: 86,1...
€1.465,37 €1.211,05
HELLA Replacement cover orange with optics, test mark E4 6509 ECE
HELLA
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional information: • With pattern. More
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional informati...
€44,07 €36,42 €42,43 €35,07
You save 4%
Cobo Rear light left / right 220 x 104 mm, 12 V
Cobo
Nominal voltage: 12 V. Installation location: Left/right. Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Bulbs included: No. Light function: Indicator ligh... More
Nominal voltage: 12 V. Installation location: Left/right. Bulb: 12V21W...
€61,98 €51,22 €57,02 €47,13
You save 8%
Sensor intake air temperature sensor With plug connection
Version: Temperature sensor, With plug connection. More
Version: Temperature sensor, With plug connection.
€30,93 €25,56
Rubber pressure element front left lifting unit operation
Version: For lift operation. More
Version: For lift operation.
€7,76 €6,42
Contact switch lifting unit operation built-in rear on the fender
Version: Lifting unit operation, Mounting: on the rear mudguard. More
Version: Lifting unit operation, Mounting: on the rear mudguard.
€114,65 €94,75
Mirror unheated 296 x 215 mm, rod Ø 18 - 24 mm John Deere
Tractor type: John Deere 6000, 6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400, 6410, 6420, 6505, 6506, 6510, 6520, 6600, 6610,... More
Tractor type: John Deere 6000, 6010, 6100, 6110, 6120, 6200, 6205, 621...
€55,08 €45,52 €50,67 €41,88
You save 8%
Shaft seal 66,48 x 95,4 x 15 mm John Deere
Version: 66.48 x 95.4 x 15 mm. Menke no.: 221662. More
Version: 66.48 x 95.4 x 15 mm. Menke no.: 221662.
€73,18 €60,48 €67,33 €55,64
You save 8%
PTO shaft end piece 244,5 mm, 1 3/4" 6 splines, 33 teeth John Deere
Version: 540 rpm, length 244,5 mm, 1 3/4", 6 splines, 33 teeth, Ø 51,5 mm. More
Version: 540 rpm, length 244,5 mm, 1 3/4", 6 splines, 33 teeth, Ø 51,...
€275,67 €227,83 €253,62 €209,60
You save 8%
Vibration damper John Deere 8225R-8360RT, Series 7020-8530
€69,80 €57,69 €64,22 €53,07
You save 8%
Tensioning pulley Ø 86,5 / 39,37 mm John Deere
Outer Ø: 86,5 mm. Width: 39,37 mm. More
Outer Ø: 86,5 mm. Width: 39,37 mm.
€101,19 €83,63 €93,09 €76,94
You save 8%
O-ring cylinder head Ø 18,72 x 2,61 mm John Deere
Description: Ø 18.72 x 2.61 mm. More
Description: Ø 18.72 x 2.61 mm.
€2,83 €2,33
Exhaust gasket John Deere
Cylinder head gasket engine 6081 Powertech 8,1 L John Deere
€71,15 €58,80 €65,46 €54,10
You save 8%
Sealing washer return line outer-Ø 10,5 mm, inner-Ø 5,6 mm
Dimensions: Height 5.4 <lt>br<gt> Outer Ø 10.5 <lt>br<gt> Inner Ø 5.6</gt></lt></gt></lt> mm. Outer Ø: 10,5 mm. Height: 5,4 mm. Inner Ø: 5,6 mm. M... More
Dimensions: Height 5.4 <lt>br<gt> Outer Ø 10.5 <lt>br<gt> Inner Ø 5....
€2,51 €2,08
As for for- and rear window John Deere SE6100-6930 PR
€50,76 €41,95 €46,70 €38,59
You save 8%
Pick-up hitch hook ISO 60 x 60 mm, 280 mm, bore Ø 22,5 mm
Hole Ø: 22.5 mm. Width x height: 60 x 60 mm. Length: 280 mm. Hole spacing: 115 mm. More
Hole Ø: 22.5 mm. Width x height: 60 x 60 mm. Length: 280 mm. Hole spa...
€337,81 €279,18 €310,79 €256,85
You save 8%
Showing 145 - 192 of 222

John Deere 8220 parts

A John Deere 8220 earns its keep on heavy draft work, and that is exactly where it wears: at the rear, in the cooling system and in the cab. You will find more than 200 parts for this tractor on this page, from GRANIT, ROCKINGER, GRAMMER, Walterscheid and HELLA.

In the cab

Long days call for a decent seat. There are air suspended tractor seats such as the Maximo Professional and seats from GRAMMER. For lighting there are LED work lamps with a broad beam that light up the whole working area. Angle a broad beam lamp slightly downwards. You avoid dazzling anyone and see the ground beside the implement clearly.

Rear hitch, PTO and air brakes

For the rear there are ball type drawbars, drawbar frames from ROCKINGER among others, PTO shaft ends and connector heads for trailers with air brakes. If you run implements with forced steering, parts for that system are here too. Grease the ball of a ball type drawbar regularly. A dry ball wears faster and gives a jerky ride. On an air brake connector head, inspect the rubber seal inside. A split seal leaks air, and the trailer reservoirs then fill only slowly.

Cooling, belts and engine

The cooling system is covered by thermostats and their gaskets. Always renew the gasket and clean both faces thoroughly, as leftover gasket material is the usual cause of a leaking thermostat housing. For the belt drive there is a V-belt tensioner. When you change the alternator, spin the tensioner pulley by hand. If the bearing feels rough or makes noise, replace it at the same time.

Elsewhere on the engine you will find an alternator, engine sensors, seals and sealing rings, some made for the John Deere 7R, 8R and 8000 series, and a gasket for the turbocharger oil return line.

Confirming the fit

Check the type plate first to make sure it is an 8220. Seals and sealing rings are listed for several John Deere models, so the number on the part you removed is the best check against the reference number shown with the product. For drawbar frames, measure the rail width of the frame now fitted.

The 8220 belongs to the 8020 series along with the John Deere 8320, the John Deere 8420 and the John Deere 8520. Each has its own page, so you can order per machine. The overview at John Deere parts leads you to every other model from the brand.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart