Menu
EUR

John Deere 8260R tractor parts & technical data

Everything that fits the John Deere 8260R from the 8R/8RT series: more than 200 parts, including trailer couplings, lighting and electrics, sorted by model.

211 parts found for John Deere 8260R
Show:
Push button switch PTO shaft 48 V, button yellow, make contact, Ø 30 mm
Version: 48 V switching voltage, Yellow button, make contact, Total button travel: 5 mm, Ø 30 mm, AMP plug connection (Superseal 3 x 1.5), dustproof ... More
Version: 48 V switching voltage, Yellow button, make contact, Total bu...
€47,09 €38,92 €42,60 €35,21
You save 10%
HELLA LED work lights flood beam 28 W, 1700 lm, 177 x 105 mm
HELLA
Nominal voltage: 12 / 24 V. Voltage range: 9 - 33 V. Bulb: LED. Bulbs included: Yes. Light function: Close-range illumination. Dimensions W x H x D: 1... More
Nominal voltage: 12 / 24 V. Voltage range: 9 - 33 V. Bulb: LED. Bulbs ...
€295,50 €244,21
HELLA Rubber plugs push-on pin DIN/ISO 14620
HELLA
Material: Rubber. To fit: Socket pipes. Additional information: • To protect the socket in the socket pipe. DIN/ISO: 14620. More
Material: Rubber. To fit: Socket pipes. Additional information: • To...
€8,55 €7,07
Relays changeover contact 12 V / 30 - 40 A, 5-pin, without bracket
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal. More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal.
€14,15 €11,69
Wabco Trailer control valve with drukbegrenzing 8 bar, M22 x 1,5, NW 10 mm
Wabco
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (mm): 10 | Working pressure (bar): 8 More
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (m...
€585,42 €483,82 €529,65 €437,73
You save 10%
HELLA Interior lights 12 V with switch John Deere 3320 - 8360RT
HELLA
Switches: Yes | Type: Bulb | Mounting type: Flush mounting | Bulb: K (10W) | Interior lighting: Innenleuchte | Cable length (mm): 150 | Bulbs included... More
Switches: Yes | Type: Bulb | Mounting type: Flush mounting | Bulb: K (...
€38,91 €32,16
Scharmüller Forced steering 250 mm, K50, right, 2 ton, black, 11,23 kg
Scharmüller
Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour: Black | Lock: K50 | Assemb... More
Description: Approved for steering forces up to 20 kN (2 t) | Connecti...
€612,85 €506,49
Sauermann Housing, pick-up hitch complete John Deere
€269,35 €222,60 €255,85 €211,45
You save 5%
Ball joint 225 mm, M16 x 2, M45 x 2, taper 34,1 - 44 mm
A: 225 mm. C: M16 x 2 mm. D: M45 x 2 mm. E: 34,1 mm. F: 44 mm. Taper: 34,1 - 44 mm. Tube Ø: 61,25 mm. More
A: 225 mm. C: M16 x 2 mm. D: M45 x 2 mm. E: 34,1 mm. F: 44 mm. Taper: ...
€679,95 €561,94 €645,95 €533,84
You save 5%
GRANIT Ball joint 428 mm, Ø 104,7 mm, M45 x 2
GRANIT
A: 375 mm. C: Ø104,7 mm. D: M45 x 2 mm. More
A: 375 mm. C: Ø104,7 mm. D: M45 x 2 mm.
€907,84 €750,28 €862,40 €712,73
You save 5%
Scharmüller Inserts 330/25/32 mm, JD green
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Colour: JD green. Version: Inserts. Category: Drawbar. More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Colour: ...
€566,90 €468,51
GRANIT EGR valve John Deere 6150M, 6170M, 6140R-6210R
Crankshaft seal for Ø 55,4 x 84 x 14,5 mm John Deere
Outer Ø: 84 mm. Width: 14,5 mm. Inner Ø: 55,4 mm. More
Outer Ø: 84 mm. Width: 14,5 mm. Inner Ø: 55,4 mm.
€39,00 €32,23
GRANIT Turbocharger John Deere 2450-2850, combine 1052
Mirror 305 x 215 mm, heated, 12 V, electric adjustment
Dimensions: 305 x 215 mm. Height: 305 mm. Width: 215 mm. Version: Heated. Operating voltage: 12 V. Notes: Electric adjustment. More
Dimensions: 305 x 215 mm. Height: 305 mm. Width: 215 mm. Version: Heat...
€219,23 €181,18 €198,35 €163,93
You save 10%
Wiper blade standard 500 mm, 20 inch John Deere SE6100-SE6920
Length: 500 mm. Length: 20 inches. Version: Standard. More
Length: 500 mm. Length: 20 inches. Version: Standard.
€24,55 €20,29
GRANIT Lock pin John Deere 6105R-6125R
GRANIT Seal John Deere 7R, 8R/8RT, 8000-8030
€33,93 €28,04 €32,20 €26,61
You save 5%
Reflector round red Ø 61 mm, bonded
Form: Round. Mounting type: Bonded. Colour: Red. Total Ø: 61 mm. Material: Plastic. Test mark: ECE. More
Form: Round. Mounting type: Bonded. Colour: Red. Total Ø: 61 mm. Mate...
€2,39 €1,98
Cobo Headlight left / right 12 V, 60/55 W H4, attachment upright
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Light function: Dipped beam, full beam. Additional information: Verti... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€170,38 €140,81 €154,15 €127,40
You save 10%
Coolant temperature sensor
€42,49 €35,12 €38,40 €31,74
You save 10%
GRANIT Temperature sensor coolant M14 x 1,5
GRANIT
Version: Thread: M14 x 1.5. More
Version: Thread: M14 x 1.5.
€98,41 €81,33 €93,45 €77,23
You save 5%
Showing 73 - 96 of 211

John Deere 8260R parts for road transport and trailer work

A John Deere 8260R covers a lot of road miles with heavy trailers and machinery behind it. A good share of what we carry for this model is therefore about hitching up, braking and being seen. This page holds more than 200 replacement parts from GRANIT, Sauermann, HELLA, ROCKINGER and Scharmüller.

Coupling up and air brakes

For the hitch there are ball drawbars, complete drawbar frames and parts for forced steering. If you pull an air-braked trailer, you need sound connector heads and a working trailer control valve, and both are available here.

A tip on the connector heads: red is the supply line, yellow is the brake line. Check the rubber seal in each head for cracks every time you hitch up. A head that hisses quietly does not just waste air, it makes the compressor work longer and slows the response of the trailer brakes. Keep the dust flaps closed when nothing is coupled so dirt cannot get in.

Lights and visibility

On the road and in the field after dark, you want to see clearly and be seen. There are work lamps, LED versions included, and beacons for the cab roof. A seal for the door hinges and pull handles keeps draughts and dust out of the cab.

Engine and systems

Under the bonnet you will find sensors such as the one for engine oil pressure, temperature sensors for the inlet manifold, O-rings for the fuel line and gear reduction starters. For the air conditioning there are aircon compressors, and for the steering there are ball joints.

  • drawbars, drawbar frames and forced steering
  • connector heads and trailer control valves
  • LED work lamps and beacons
  • sensors, temperature sensors and O-rings
  • aircon compressors, ball joints and gear reduction starters

Type plate and reference numbers

The type plate on your 8260R carries the serial number we need when we track down a part together. Sensors and valves nearly always have a number printed or engraved on them. Compare it with the product details before ordering, especially for electrical parts with a specific plug.

The 8260R is part of the 8R series. The John Deere 8295R, John Deere 8310R, John Deere 8320R, John Deere 8335R, John Deere 8345R and John Deere 8370R from that series each have a page with their own parts. The 8285R and 8360R belong to the same line. For every other tractor from the make, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart