Menu
EUR

John Deere 8260R tractor parts & technical data

Everything that fits the John Deere 8260R from the 8R/8RT series: more than 200 parts, including trailer couplings, lighting and electrics, sorted by model.

212 parts found for John Deere 8260R
Show:
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
Version: Ø 34,5 x 3,5 mm More
Version: Ø 34,5 x 3,5 mm
€6,79 €5,61
Sauermann Bolt lock with release John Deere 5070M - 8530
Sauermann
Description: With release More
Description: With release
€298,23 €246,47 €274,37 €226,75
You save 8%
Sauermann Cast lid Ø 8,2 mm John Deere
€203,66 €168,31 €187,37 €154,85
You save 8%
Internal plate Hi-Lo 3 mm, inner 138 mm, outer 230 mm, 66 teeth
Version: Inner: 138 mm Outer: 230 mm | Teeth: 66 | Thickness (mm): 3 More
Version: Inner: 138 mm Outer: 230 mm | Teeth: 66 | Thickness (mm): 3
€106,96 €88,40 €98,40 €81,33
You save 8%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€49,85 €41,20 €45,86 €37,90
You save 8%
Filter dryer 228 mm, #6 3/8 o-ring John Deere 8100 - 8410
Weight (g): 500 | Thread: #6 3/8 O-ring | Length (mm): 228 | Connection thread: F/M More
Weight (g): 500 | Thread: #6 3/8 O-ring | Length (mm): 228 | Connectio...
€82,37 €68,07 €75,78 €62,63
You save 8%
Aircon compressor 10PA17C 12 V, pulley Ø 140 mm, 8 grooves John Deere
Menke no.: 65259 | Oil quantity (ccm): 200 | For compressor: 10PA17C | Pulley Ø (mm): 140 | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Cylinder... More
Menke no.: 65259 | Oil quantity (ccm): 200 | For compressor: 10PA17C |...
€577,35 €477,15 €531,16 €438,98
You save 8%
Expansion valve 3/8 inch o-ring John Deere 6010 - 9620RX
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A: - More
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connectio...
€67,42 €55,72 €62,03 €51,26
You save 8%
Denso Aircon compressor 12 V, pulley Ø 145 mm, 1 groove John Deere
Denso
Nominal voltage (V): 12 | Fixing: DM | Refrigerant: R 134a | Oil quantity (ccm): 220 | No. of grooves: 1 | Suitable oil: ND-oil 8 | Pulley Ø (mm): 14 More
Nominal voltage (V): 12 | Fixing: DM | Refrigerant: R 134a | Oil quant...
€1.265,50 €1.045,87 €1.164,26 €962,20
You save 8%
Alternator 12 V / 150 A John Deere 7720 - 9620T
Belt tension hole Ø / R (mm): M8 / 86,0 | Pulley spacing (mm): 32,0 | Nominal voltage (V): 12 | Mounting L / d / R (mm): 58,0 / 10,5 / 83,0 | Pulley ... More
Belt tension hole Ø / R (mm): M8 / 86,0 | Pulley spacing (mm): 32,0 |...
€428,92 €354,48 €394,61 €326,12
You save 8%
LED work light oval spotlight 65 W, 3500 lm John Deere 5100R - 8320R
Operating temperature (°C): -40 / +50 | Mounting type: Vertical, M4 | Power consumption (W): 65 | No. of LEDs: 4 | Light function: Spotlight | Theore... More
Operating temperature (°C): -40 / +50 | Mounting type: Vertical, M4 |...
€82,01 €67,78 €75,45 €62,35
You save 8%
Denso Starter motor with reduction 12 V, 4,8 kW, 10 teeth, 245 mm, clamp 30 M12
€809,35 €668,88 €744,60 €615,37
You save 8%
Brake disc Ø 427 x 10,5 mm, 14 teeth John Deere
€415,03 €343,00 €381,83 €315,56
You save 8%
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Referenc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.018,93 €842,09 €937,42 €774,72
You save 8%
HELLA LED work lights flood beam 28 W, 1700 lm, 177 x 105 mm
HELLA
Nominal voltage: 12 / 24 V. Voltage range: 9 - 33 V. Bulb: LED. Bulbs included: Yes. Light function: Close-range illumination. Dimensions W x H x D: 1... More
Nominal voltage: 12 / 24 V. Voltage range: 9 - 33 V. Bulb: LED. Bulbs ...
€306,82 €253,57 €295,50 €244,22
You save 4%
HELLA Bulb R10W 12 V, 10 W, BA15s - 10 pieces
HELLA
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | Power (watts): 10 More
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | P...
€18,94 €15,65
ROCKINGER Forced steering double-sided, K50, John Deere
ROCKINGER
To fit: Rockinger ball insert or hitch support 787880K01140 | Lock: K50 | Assembly notes: Both ends More
To fit: Rockinger ball insert or hitch support 787880K01140 | Lock: K5...
€1.223,49 €1.011,15 €942,68 €779,08
You save 23%
Sauermann Trailer coupling rail 330 mm, hitch pin 31 mm, 97,1 kN John Deere
Sauermann
D-value (kN): 97,1 | Guide width (mm): 32 | Colour: JD green | Version: Sliding bolt | Lock: manual | Detent pin Ø (mm): 25 | Rail width (mm): 330 | ... More
D-value (kN): 97,1 | Guide width (mm): 32 | Colour: JD green | Version...
€625,47 €516,92 €575,43 €475,56
You save 8%
Denso Air conditioning compressor 12 V, R 134a, pulley Ø 140 mm, 8 grooves John Deere
Denso
Pulley Ø (mm): 140 | No. of grooves: 8 | Nominal voltage (V): 12 | Refrigerant: R 134a | Oil quantity (ccm): 230 | Suitable oil: ND-oil 8 More
Pulley Ø (mm): 140 | No. of grooves: 8 | Nominal voltage (V): 12 | Re...
€861,19 €711,73 €792,29 €654,79
You save 8%
LED work light oval spotlight 65 W, 6000 lm John Deere 5085E - 8320R
Current (A): [email protected] [email protected] | Dimensions W x H x D (mm): 170 x 82 x 79 | Nominal voltage (V): 12 / 24 | No. of LEDs: 4 | Form: Oval | Mounting siz... More
Current (A): [email protected] [email protected] | Dimensions W x H x D (mm): 170 x 82 ...
€90,38 €74,69 €83,15 €68,72
You save 8%
Stabilus Gas strut 200 N, 475 mm, stroke 195 mm John Deere 7200R - 8370R
Stabilus
Newtons: 200 | d1 (mm): 8 | A (mm): 475 | Form: 6 | B (mm): 234,9 | Stroke (mm): 195 | d2 (mm): 18 More
Newtons: 200 | d1 (mm): 8 | A (mm): 475 | Form: 6 | B (mm): 234,9 | St...
€173,49 €143,38 €159,61 €131,91
You save 8%
Sauermann Housing, pick-up hitch complete John Deere
€281,06 €232,28 €258,58 €213,70
You save 8%
FEBI Thermostat John Deere 6090MC, 6095MC, 6100MC, 6105MC
FEBI
Thermostat John Deere 6090MC, 6095MC, 6100MC, 6105MC More
Thermostat John Deere 6090MC, 6095MC, 6100MC, 6105MC
€82,72 €68,36 €23,09 €19,08
You save 72%
Denso Gear reduction starter 12 V, 5,0 kW, 11 teeth, Ø 89 mm, clockwise
€528,92 €437,12 €486,61 €402,15
You save 8%
Scharmüller Inserts 330/25/32 mm, JD green
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Colour: JD green. Version: Inserts. Category: Drawbar. More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Colour: ...
€588,64 €486,48 €541,55 €447,56
You save 8%
BOSCH Wiper blade Twin 500 / 500 mm - 2 pieces John Deere
BOSCH
Length: 500 / 500 mm. Length: 20 / 20 inches. Version: Front. Part no.: 790. Reference no.: 3397118560. More
Length: 500 / 500 mm. Length: 20 / 20 inches. Version: Front. Part no....
€36,38 €30,06
Sauermann Drawbar inner part 330 mm, coupling pin 31 mm, 2500 kg
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 32 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Version:... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€809,65 €669,13 €744,88 €615,60
You save 8%
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
You save 21%
Micro relay changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks. More
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 ...
€14,20 €11,74
Stabilus Gas strut 125 N, 425 mm, stroke 150 mm John Deere 7200R - 9620RX
Stabilus
Form: diverse | d1 (mm): 6 | Stroke (mm): 150 | A (mm): 425 | B (mm): 229,2 | d2 (mm): 15 | Newtons: 125 More
Form: diverse | d1 (mm): 6 | Stroke (mm): 150 | A (mm): 425 | B (mm): ...
€152,02 €125,64 €139,86 €115,59
You save 8%
Sauermann Wear plate trailer coupling HS 1500 John Deere
€195,20 €161,32 €179,58 €148,42
You save 8%
Sauermann Locking bolt set trailer coupling 330 mm rail width
€214,02 €176,88 €196,90 €162,73
You save 8%
AKS-Dasis Air conditioning compressor 12 V, pulley-Ø 146 mm, 1 groove John Deere
AKS-Dasis
Fixing: DM | Oil quantity (ccm): 230 | Pulley Ø (mm): 146 | No. of grooves: 1 | Nominal voltage (V): 12 More
Fixing: DM | Oil quantity (ccm): 230 | Pulley Ø (mm): 146 | No. of gr...
€592,63 €489,78 €545,22 €450,59
You save 8%
HELLA Interior lights 12 V with switch John Deere 3320 - 8360RT
HELLA
Switches: Yes | Type: Bulb | Mounting type: Flush mounting | Bulb: K (10W) | Interior lighting: Innenleuchte | Cable length (mm): 150 | Bulbs included... More
Switches: Yes | Type: Bulb | Mounting type: Flush mounting | Bulb: K (...
€40,40 €33,39 €38,91 €32,16
You save 4%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€645,02 €533,07 €386,32 €319,28
You save 40%
Track rod 795 mm, Ø 34 mm, taper 22,8 - 24 mm
A: 795 mm. D: 34 mm. E: 22,8 mm. F: 24 mm. Taper: 22,8 - 24 mm. More
A: 795 mm. D: 34 mm. E: 22,8 mm. F: 24 mm. Taper: 22,8 - 24 mm.
€143,31 €118,44 €131,85 €108,96
You save 8%
Thrust bearing standard John Deere
€115,90 €95,79 €106,63 €88,12
You save 8%
Wiper motor John Deere Series 7R-9630T, SE6010-6930 PR
€262,25 €216,74 €241,27 €199,40
You save 8%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
ROCKINGER Drawbar with Piton fix 89,3 kN, rail width 330 mm John Deere
ROCKINGER
D-value: 89,3 kN. Detent pin Ø: 25 mm. Guide width: 32 mm. Rail width: 330 mm. Load capacity: 2000 / *3000 kg. Colour: JD green. Description: Hitch s... More
D-value: 89,3 kN. Detent pin Ø: 25 mm. Guide width: 32 mm. Rail width...
€1.783,96 €1.474,35
ROCKINGER Drawbar frame 330/25/32, 2000/4000 kg, 89,3 kN John Deere
ROCKINGER
To fit as: John Deere Serie 6M, Serie 6R, Serie 8R/8RT, Serie 6000/6000SE, Serie 6000/6000SE, Serie 6010/6010SE, Serie 6020/6020SE, Serie 6030/6030PR,... More
To fit as: John Deere Serie 6M, Serie 6R, Serie 8R/8RT, Serie 6000/600...
€2.017,69 €1.667,51 €1.604,60 €1.326,12
You save 20%
HELLA Work lamp flood beam HB3 60 W, 174 x 122 x 120 mm, 12 V, upright
HELLA
Bulb: HB3. Bulbs included: Yes. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: 174 x 122 x 120 mm. ... More
Bulb: HB3. Bulbs included: Yes. Light function: Close-range illuminati...
€86,49 €71,48 €83,29 €68,84
You save 4%
LED work lights spotlight 6000 lm, 70 W, 173 x 129 x 56 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€67,93 €56,14 €62,50 €51,65
You save 8%
Showing 49 - 96 of 212

John Deere 8260R parts for road transport and trailer work

A John Deere 8260R covers a lot of road miles with heavy trailers and machinery behind it. A good share of what we carry for this model is therefore about hitching up, braking and being seen. This page holds more than 200 replacement parts from GRANIT, Sauermann, HELLA, ROCKINGER and Scharmüller.

Coupling up and air brakes

For the hitch there are ball drawbars, complete drawbar frames and parts for forced steering. If you pull an air-braked trailer, you need sound connector heads and a working trailer control valve, and both are available here.

A tip on the connector heads: red is the supply line, yellow is the brake line. Check the rubber seal in each head for cracks every time you hitch up. A head that hisses quietly does not just waste air, it makes the compressor work longer and slows the response of the trailer brakes. Keep the dust flaps closed when nothing is coupled so dirt cannot get in.

Lights and visibility

On the road and in the field after dark, you want to see clearly and be seen. There are work lamps, LED versions included, and beacons for the cab roof. A seal for the door hinges and pull handles keeps draughts and dust out of the cab.

Engine and systems

Under the bonnet you will find sensors such as the one for engine oil pressure, temperature sensors for the inlet manifold, O-rings for the fuel line and gear reduction starters. For the air conditioning there are aircon compressors, and for the steering there are ball joints.

  • drawbars, drawbar frames and forced steering
  • connector heads and trailer control valves
  • LED work lamps and beacons
  • sensors, temperature sensors and O-rings
  • aircon compressors, ball joints and gear reduction starters

Type plate and reference numbers

The type plate on your 8260R carries the serial number we need when we track down a part together. Sensors and valves nearly always have a number printed or engraved on them. Compare it with the product details before ordering, especially for electrical parts with a specific plug.

The 8260R is part of the 8R series. The John Deere 8295R, John Deere 8310R, John Deere 8320R, John Deere 8335R, John Deere 8345R and John Deere 8370R from that series each have a page with their own parts. The 8285R and 8360R belong to the same line. For every other tractor from the make, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart