Menu
EUR

John Deere 8360R tractor parts & technical data

Servicing a John Deere 8360R? This 8R/8RT series page brings together more than 200 parts, such as trailer couplings, lighting and electrics for the tractor.

208 parts found for John Deere 8360R
Show:
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€618,13 €510,85 €386,30 €319,26
You save 38%
Denso Starter motor with reduction 12 V, 4,8 kW, 10 teeth, 245 mm, clamp 30 M12
€775,61 €641,00 €736,80 €608,93
You save 5%
Denso Gear reduction starter 12 V, 5,0 kW, 11 teeth, Ø 89 mm, clockwise
€506,87 €418,90 €481,50 €397,93
You save 5%
Shaft seal 66,48 x 95,4 x 15 mm John Deere
Version: 66.48 x 95.4 x 15 mm. Menke no.: 221662. More
Version: 66.48 x 95.4 x 15 mm. Menke no.: 221662.
€70,13 €57,96 €66,60 €55,04
You save 5%
GRANIT Fitting John Deere - 50 pieces
GRANIT Filler cap for expansion tank, opening pressure 1,13 bar
GRANIT
Version: for expansion tank. Opening pressure: 1,13 bar. More
Version: for expansion tank. Opening pressure: 1,13 bar.
€55,85 €46,16
Vibration damper John Deere 8225R-8360RT, Series 7020-8530
€66,89 €55,28 €63,50 €52,48
You save 5%
GRANIT Thrust bearing standard John Deere
€111,07 €91,79 €105,50 €87,19
You save 5%
Main bearing standard John Deere
€44,71 €36,95 €42,45 €35,08
You save 5%
GRANIT Sealing washer return line outer-Ø 10,5 mm, inner-Ø 5,6 mm
GRANIT
Dimensions: Height 5.4 <lt>br<gt> Outer Ø 10.5 <lt>br<gt> Inner Ø 5.6</gt></lt></gt></lt> mm. Outer Ø: 10,5 mm. Height: 5,4 mm. Inner Ø: 5,6 mm. M... More
Dimensions: Height 5.4 <lt>br<gt> Outer Ø 10.5 <lt>br<gt> Inner Ø 5....
€2,40 €1,98
GRANIT Sensor air temperature
GRANIT
Version: For air temperature. More
Version: For air temperature.
€46,11 €38,11 €43,80 €36,20
You save 5%
GRANIT Magnetic sensor engine speed thread Ø 20 mm, length 36 mm
GRANIT
Thread: Ø 20 mm. Length: 36 mm. More
Thread: Ø 20 mm. Length: 36 mm.
€36,20 €29,92
Boost pressure sensor
€212,68 €175,77 €192,40 €159,01
You save 10%
GRANIT Rail pressure sensor pressure control valve fuel injectors rail
GRANIT
Version: Pressure control valve - fuel (common rail). More
Version: Pressure control valve - fuel (common rail).
€157,66 €130,30 €149,75 €123,76
You save 5%
Wabco Trailer control valve 8 bar, M22 x 1,5, screw distance 117 x 117 mm
€814,45 €673,10 €736,85 €608,97
You save 10%
Sauermann Cast lid Ø 8,2 mm John Deere
€195,17 €161,30 €185,40 €153,22
You save 5%
GRANIT Internal plate Hi-Lo 3 mm, inner 138 mm, outer 230 mm, 66 teeth
GRANIT
Version: Inner: 138 mm Outer: 230 mm | Teeth: 66 | Thickness (mm): 3 More
Version: Inner: 138 mm Outer: 230 mm | Teeth: 66 | Thickness (mm): 3
€102,50 €84,71 €97,35 €80,45
You save 5%
Showing 145 - 168 of 208

John Deere 8360R parts

Long days behind heavy equipment put the cab, the lighting and the electrics of a John Deere 8360R to work. This page gathers more than 200 replacement parts that fit the tractor, from GRANIT, Sauermann, HELLA, ROCKINGER, Scharmüller and other makers.

Work lights and beacons

For work after dark there are LED work lights, oval halogen work lamps and beacons for the cab roof. Before replacing a lamp that flickers, look at the connector. Green corrosion on the pins is a common cause, and a new lamp will not cure it.

Cab and air conditioning

There is an aircon compressor for the cab, plus seals for the door hinges and pull handles. When the compressor is replaced, renew the receiver drier too and fill the correct amount of oil. Dirt or moisture left in the system will otherwise shorten the life of the new compressor. If the air conditioning is merely weak, have the refrigerant level checked before blaming the compressor.

Sensors and the starter

Sensors keep an eye on the engine of the 8360R. Oil pressure sensors and inlet manifold temperature sensors are listed, along with fuel line O-rings and a gear reduction starter.

If the dashboard warns of low oil pressure while the oil level is fine, check the sensor and its plug before looking further. Never change a sensor on a hot engine. Let the oil cool, keep a rag ready and tighten the new sensor with feeling, because the thread in the block is less forgiving than the one on the sensor.

Hitch and trailer air

At the rear you will find drawbars with a ball, drawbar frames and adapter plates. For trailers with forced steering there are inner parts for that steering. Connector heads and trailer control valves cover the air brake connection. A trailer control valve that leaks often gives itself away as a faint hiss with the tractor parked and the engine off.

Ordering with confidence

Begin with the type plate, which confirms the tractor is an 8360R. A reference number on the old part is then your best guide. Compare it with the parts on this page before you order, particularly with sensors, where thread sizes differ.

Other tractors in the John Deere 8R/8RT series also have their own page, which helps if there is more than one on the farm:

The 8260R and 8285R are part of the same series. For the rest of the brand, see the John Deere parts overview.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart