Menu
EUR

John Deere 8400 tractor parts & technical data

In the parts catalogue the John Deere 8400 belongs to the 8000/8000T range. Here you get more than 300 matching parts, including lighting and electrics.

332 parts found for John Deere 8400
Show:
GRANIT Start switch without key and nut, blade connection
GRANIT
Version: With blade terminal Circuit:, 0: off, 1: consumer, 2: preheat, 3: start, Key 640RE183935, nut 640R44342. More
Version: With blade terminal Circuit:, 0: off, 1: consumer, 2: preheat...
€77,00 €63,64 €69,65 €57,56
You save 10%
Philips Spherical bulb R10W standard 12 V, 10 W, BA15s, ECE - 10 pieces
Philips
Voltage (V): 12 | Power (watts): 10 | Socket: BA15s More
Voltage (V): 12 | Power (watts): 10 | Socket: BA15s
€14,80 €12,23
GRANIT Halogen bulb HB3 12 V, 60 W, P20d
GRANIT
Voltage (V): 12 | Power (watts): 60 | Socket: P20d More
Voltage (V): 12 | Power (watts): 60 | Socket: P20d
€15,85 €13,10
HELLA Beacon H1 KL Rota Compact 12 V, 55 W, Ø 133 mm, 217 mm, push-on pin
HELLA
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 133 mm. Total height: 217 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€80,21 €66,29
HELLA Work lamp flood beam HB3 60 W, 174 x 122 x 120 mm, 12 V, upright
HELLA
Bulb: HB3. Bulbs included: Yes. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: 174 x 122 x 120 mm. ... More
Bulb: HB3. Bulbs included: Yes. Light function: Close-range illuminati...
€83,25 €68,80
HELLA Lens yellow / red P21/5W, P21W, 12 V left / right
HELLA
Bulb: P21/5W / P21W. Colour: Yellow, red. Installation location: Right, left. Nominal voltage: 12 V. Test mark: E1 02350 / E1 63255. Light function: W... More
Bulb: P21/5W / P21W. Colour: Yellow, red. Installation location: Right...
€49,62 €41,01 €38,01 €31,41
You save 23%
GRANIT Work lamp halogen 50 W, 12 V, square, open cable ends
GRANIT
Bulb: Halogen. Form: Rectangular. Power consumption: 50 W. Bulbs included: -. More
Bulb: Halogen. Form: Rectangular. Power consumption: 50 W. Bulbs inclu...
€92,34 €76,31 €83,50 €69,01
You save 10%
Bracket
€118,53 €97,96 €107,20 €88,60
You save 10%
Work lamp angular front 12 V, bulbs included
Form: Rectangular. Installation location: Front. Nominal voltage: 12 V. Additional information: Bulbs not interchangeable. Bulbs included: Yes. More
Form: Rectangular. Installation location: Front. Nominal voltage: 12 V...
€37,13 €30,69 €33,55 €27,73
You save 10%
GRANIT Temperature sensor thermostat housing M14 x 1,5, 40-100 °C
GRANIT
Version: Thermostat housing M14 x 1.5 | Max. 100. Thread: M14 x 1.5. Temperature: 40 - 100 °C. More
Version: Thermostat housing M14 x 1.5 | Max. 100. Thread: M14 x 1.5. T...
€56,53 €46,72 €53,70 €44,38
You save 5%
GRANIT Sensor engine speed 12 volt
GRANIT
Version: 12 V. More
Version: 12 V.
€68,81 €56,87 €62,25 €51,45
You save 10%
LED work lights spotlight 19 W, 952 lm, 110 x 80 x 50 mm, 12 / 24 V
Nominal voltage (V): 12 / 24 | Voltage range (V): 9 - 36 | Bulb: LED | Bulbs included: Yes | Light function: Far-reaching illumination | Dimensions W ... More
Nominal voltage (V): 12 / 24 | Voltage range (V): 9 - 36 | Bulb: LED |...
€65,10 €53,80 €58,90 €48,68
You save 10%
External plate thickness 3 mm, inner 120 mm, outer 194,7 mm, 6 teeth
Version: Thickness: 3 mm Inner: 120 mm Outer: 194.7 mm 6 teeth More
Version: Thickness: 3 mm Inner: 120 mm Outer: 194.7 mm 6 teeth
€53,66 €44,35 €50,95 €42,11
You save 5%
Window rubber clamping range 4 - 6 mm, h 14,5 x b 23,2 mm - 1 meter
Length (m): 1 | Clamping range (mm): 4 - 6 | H (mm): 14,5 | B (mm): 23,2 More
Length (m): 1 | Clamping range (mm): 4 - 6 | H (mm): 14,5 | B (mm): 23...
€10,70 €8,84
Wabco Silencer Ø 57 mm, height 107 mm, clamp
Wabco
Version: Mounting with clamp Ø 57 mm, height 107 mm More
Version: Mounting with clamp Ø 57 mm, height 107 mm
€120,88 €99,90 €114,80 €94,88
You save 5%
Wabco Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
Wabco
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Opening pressure (bar): p2 + 2,5 | Output pressure (bar): 7,4 + 0,2 | Inlet connecti... More
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Open...
€252,65 €208,80 €240,00 €198,35
You save 5%
GRANIT PTO shaft end piece 1 3/8 inch, 6 splines, 540/1000 rpm. John Deere
GRANIT
Version: 1 3/8”, 6 grooves, 540/1000 rpm More
Version: 1 3/8”, 6 grooves, 540/1000 rpm
€827,20 €683,64 €785,80 €649,42
You save 5%
GRANIT External plate thickness 3 mm, inner 138 mm, outer 215 mm
GRANIT
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€66,94 €55,32 €63,55 €52,52
You save 5%
Internal plate Hi-Lo 2,3 mm, inner 152,3 mm, outer 191,9 mm, 6 teeth
Version: thickness = 2,3 mm inner = 152,3 mm outer = 191,9 mm 6 teeth More
Version: thickness = 2,3 mm inner = 152,3 mm outer = 191,9 mm 6 teeth
€47,66 €39,39 €45,25 €37,40
You save 5%
External plate 1,5 mm, inner 99 mm, outer 152 mm, 6 teeth John Deere
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth More
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth
€38,82 €32,08 €36,85 €30,45
You save 5%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€47,77 €39,48 €45,35 €37,48
You save 5%
Pilot bearing 17 x 40 x 12 mm
Dimensions (mm): 17 x 40 x 12 More
Dimensions (mm): 17 x 40 x 12
€6,40 €5,29
LED work lights floodlight 3000 lm, 40 W, 9 - 32 V, 142 x 97,5 x 54 mm
Effective luminous flux (lm): 3000 | Light colour (K): 6000 | Bulb: LED | No. of LEDs: 8 | Dimensions W x H x D (mm): 142 x 97,5 x 54 | Height (mm): 9... More
Effective luminous flux (lm): 3000 | Light colour (K): 6000 | Bulb: LE...
€87,94 €72,68 €83,50 €69,01
You save 5%
GRANIT Aircon compressor 12 V, R134a, pulley Ø 120 mm, PV8 John Deere
GRANIT
Fixing: DM | Nominal voltage (V): 12 | Refrigerant: R 134a | Oil quantity (ccm): 150 | Suitable oil: PAG 46 | Pulley Ø (mm): 120 | No. of grooves: PV... More
Fixing: DM | Nominal voltage (V): 12 | Refrigerant: R 134a | Oil quant...
€459,27 €379,56 €415,50 €343,39
You save 10%
Showing 241 - 264 of 332

John Deere 8400 parts for cooling, cab comfort and hitching

The John Deere 8400 spends its working life on heavy draft jobs, and the parts that wear are the ones that keep it cool, keep the driver comfortable and keep implements attached. This page brings together more than 300 parts that fit the 8400, supplied by GRANIT alongside HELLA, Wabco, ROCKINGER and GRAMMER.

What fits the 8400

On the engine side there are fan clutches, thermostats, engine sensors and a hand pump for bleeding the fuel system. Seals, sealing rings and gaskets come in many forms, including a gasket for the exhaust gas recirculation valve. For the cab you will find air conditioning compressors and tractor seats such as the air suspended GRAMMER Maximo Professional, plus LED work lights from HELLA and others. At the rear there are drawbars and drawbar frames from ROCKINGER, Wabco connector heads for trailer air brakes and PTO shaft ends.

Checking a tired fan clutch

If your 8400 runs hot in summer even with a clean radiator, the fan clutch is a likely suspect. With the engine cold, turn the fan by hand. It should move with light resistance. After a run, with the engine at working temperature, that resistance should be clearly higher. If the fan spins just as easily hot as cold, or there is oil around the hub, the clutch is no longer engaging properly and replacing it is the only real cure. Since the thermostat sits in the same cooling circuit, it makes sense to change it at the same time.

Matching the right part

Start with the serial plate to confirm you are working on an 8400. After that, the quickest route is the reference number on the old part, moulded into a gasket or printed on the housing of a sensor or compressor. Some items fit several John Deere tractors and say so, such as sealing rings listed for the 7R, the 8R and the 8000 range. When in doubt, hold the old part next to the photo and description before you order.

Other tractors in the 8000 range

If you also look after another model from this range, it has its own page showing only the parts listed for that tractor, which keeps you from ordering for the wrong machine.

Every other model from the brand is listed under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart