Menu
EUR

John Deere 8400 tractor parts & technical data

In the parts catalogue the John Deere 8400 belongs to the 8000/8000T range. Here you get more than 300 matching parts, including lighting and electrics.

332 parts found for John Deere 8400
Show:
GRANIT Fan clutch M8, 88,5 mm John Deere 4050-8400T
GRANIT
Weight: 2000 g. Thread: M8. Depth: 88,5 mm. More
Weight: 2000 g. Thread: M8. Depth: 88,5 mm.
€617,70 €510,50 €586,80 €484,96
You save 5%
Breather filter John Deere
€46,31 €38,27 €43,95 €36,32
You save 5%
GRANIT Air hose intercooler Ø 76,2 mm, 142 mm John Deere 7820-8520T
GRANIT
Inner Ø: 76,2 mm. Length: 142 mm. More
Inner Ø: 76,2 mm. Length: 142 mm.
€114,97 €95,02 €109,20 €90,25
You save 5%
Gasket uitlaatterugvoerklep John Deere
Description: for EGR valve. More
Description: for EGR valve.
€4,95 €4,09
Connecting rod bolt 63 mm John Deere
Dimensions: 63 mm long. More
Dimensions: 63 mm long.
€15,35 €12,69
GRANIT Piston set, complete Ø115,5 mm, combustion chamber 73 mm, John Deere
GRANIT
Dimensions: 3 rings, Ø 115.5 mm, Pin Ø 47.5 mm, Combustion chamber Ø 73 mm, Combustion chamber depth 25.5 mm. Menke no.: 69044. Description: Suppli... More
...
€272,01 €224,80 €258,40 €213,55
You save 5%
GRANIT Sealing ring for injection nozzle Ø 13,6 x 9,3 mm, height 5,1 mm
GRANIT
Dimensions: Height 5.1, Outer Ø 13.6, Inner Ø 9.3 mm. Menke no.: 221605. More
Dimensions: Height 5.1, Outer Ø 13.6, Inner Ø 9.3 mm. Menke no.: 221...
€2,40 €1,98
Rear-view mirror 311 x 226 mm, rod-Ø 18 - 22 mm John Deere
Width: 226 mm. Length: 311 mm. Rod Ø: 18 - 22 mm. More
Width: 226 mm. Length: 311 mm. Rod Ø: 18 - 22 mm.
€492,95 €407,40 €468,30 €387,02
You save 5%
GRANIT Nozzle John Deere Al 8225R, WTS 2066
GRANIT Spindle nut 310 mm John Deere 7600-8410T
GRANIT
Dimensions: Length: 310 mm. More
Dimensions: Length: 310 mm.
€308,13 €254,65 €278,75 €230,37
You save 10%
Cover
€92,32 €76,30 €83,50 €69,01
You save 10%
Gasket AdBlue injection unit John Deere 6MC, 6RC
Description: for AdBlue injection unit. More
Description: for AdBlue injection unit.
€13,35 €11,03
Tank cap John Deere 6090M-6195M, 6110R-6250R
€40,45 €33,43 €38,40 €31,74
You save 5%
GRANIT Angled threaded fitting 90° John Deere
GRANIT
Angle: 90 °. More
Angle: 90 °.
€15,00 €12,40
Seal kit EGR valve John Deere
Description: Consists of 38012519 and 38012520, For EGR valve. More
Description: Consists of 38012519 and 38012520, For EGR valve.
€7,40 €6,12
Sleeve John Deere 7200R-8530
Showing 313 - 332 of 332

John Deere 8400 parts for cooling, cab comfort and hitching

The John Deere 8400 spends its working life on heavy draft jobs, and the parts that wear are the ones that keep it cool, keep the driver comfortable and keep implements attached. This page brings together more than 300 parts that fit the 8400, supplied by GRANIT alongside HELLA, Wabco, ROCKINGER and GRAMMER.

What fits the 8400

On the engine side there are fan clutches, thermostats, engine sensors and a hand pump for bleeding the fuel system. Seals, sealing rings and gaskets come in many forms, including a gasket for the exhaust gas recirculation valve. For the cab you will find air conditioning compressors and tractor seats such as the air suspended GRAMMER Maximo Professional, plus LED work lights from HELLA and others. At the rear there are drawbars and drawbar frames from ROCKINGER, Wabco connector heads for trailer air brakes and PTO shaft ends.

Checking a tired fan clutch

If your 8400 runs hot in summer even with a clean radiator, the fan clutch is a likely suspect. With the engine cold, turn the fan by hand. It should move with light resistance. After a run, with the engine at working temperature, that resistance should be clearly higher. If the fan spins just as easily hot as cold, or there is oil around the hub, the clutch is no longer engaging properly and replacing it is the only real cure. Since the thermostat sits in the same cooling circuit, it makes sense to change it at the same time.

Matching the right part

Start with the serial plate to confirm you are working on an 8400. After that, the quickest route is the reference number on the old part, moulded into a gasket or printed on the housing of a sensor or compressor. Some items fit several John Deere tractors and say so, such as sealing rings listed for the 7R, the 8R and the 8000 range. When in doubt, hold the old part next to the photo and description before you order.

Other tractors in the 8000 range

If you also look after another model from this range, it has its own page showing only the parts listed for that tractor, which keeps you from ordering for the wrong machine.

Every other model from the brand is listed under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart