Menu
EUR

John Deere 8400 tractor parts & technical data

In the parts catalogue the John Deere 8400 belongs to the 8000/8000T range. Here you get more than 300 matching parts, including lighting and electrics.

332 parts found for John Deere 8400
Show:
Belt tensioner Ø 90 mm, width 32 mm, John Deere 6150M-6215R
Outer Ø: 90 mm. Width: 32 mm. More
Outer Ø: 90 mm. Width: 32 mm.
€98,82 €81,67 €93,85 €77,56
You save 5%
Optibelt Multi-rib belt 14 ribs John Deere 8100-8410T
€62,25 €51,45 €59,10 €48,84
You save 5%
Optibelt Multi-rib belt 8 ribs John Deere, Massey Ferguson
€67,19 €55,53 €63,80 €52,73
You save 5%
Piston set Ø 116 mm, piston pin 47,62 mm, engine 6081
€347,89 €287,51 €330,45 €273,10
You save 5%
GRANIT Tank cap tank collar Ø 82,4 mm
GRANIT
Filler neck Ø: 82,4 mm. More
Filler neck Ø: 82,4 mm.
€109,00 €90,08
Main bearing standard John Deere
€44,71 €36,95 €42,45 €35,08
You save 5%
GRANIT Outlet valve John Deere
€37,75 €31,20
GRANIT Oil sump gasket cast iron sump engine 6081 Powertech John Deere
€65,30 €53,97 €62,00 €51,24
You save 5%
GRANIT Cylinder head gasket engine 6081 Powertech 8,1 L John Deere
€68,18 €56,35 €64,75 €53,51
You save 5%
Ball stud steel M8, wrench size 13, E 10 mm Fendt, John Deere
A: M8 mm. SW: 13. E: 10 mm. Delivery note: Due to the currently generally tense delivery situation at Toyota Material Handling, we cannot guarantee th... More
A: M8 mm. SW: 13. E: 10 mm. Delivery note: Due to the currently genera...
€4,06 €3,36
GRAMMER Tractor seat Maximo Evolution Dynamic MSG95EL/741 John Deere
GRAMMER
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 m... More
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabri...
€6.582,40 €5.440,00 €6.253,25 €5.167,98
You save 5%
GRANIT Wiper motor John Deere Series 7R-9630T, SE6010-6930 PR
€251,32 €207,70 €238,75 €197,31
You save 5%
GRANIT Rear-view mirror glass 299,5 x 215 mm, unheated John Deere
GRANIT
Dimensions: 299.5 x 215 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 2100 mm. More
Dimensions: 299.5 x 215 mm. Version: Unheated. Installation location: ...
€76,23 €63,00 €72,40 €59,83
You save 5%
Pump screenwash tank 12 V, intake-Ø 6,3 mm, press-Ø 6,3 mm
Intake Ø: 6.3 mm. Outlet Ø: 6.3 mm. To fit: Windscreen washer system. Voltage: 12 V. Connection type: 2 x 6,3. Operating mode: electric. More
Intake Ø: 6.3 mm. Outlet Ø: 6.3 mm. To fit: Windscreen washer system...
€35,71 €29,51 €32,30 €26,69
You save 10%
Gas strut door or rear window 150 N, 505 mm Fendt, John Deere
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: door or rear screen. More
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 ...
€32,90 €27,19
GRANIT Cover hood John Deere
€33,15 €27,40 €31,45 €25,99
You save 5%
Showing 145 - 168 of 332

John Deere 8400 parts for cooling, cab comfort and hitching

The John Deere 8400 spends its working life on heavy draft jobs, and the parts that wear are the ones that keep it cool, keep the driver comfortable and keep implements attached. This page brings together more than 300 parts that fit the 8400, supplied by GRANIT alongside HELLA, Wabco, ROCKINGER and GRAMMER.

What fits the 8400

On the engine side there are fan clutches, thermostats, engine sensors and a hand pump for bleeding the fuel system. Seals, sealing rings and gaskets come in many forms, including a gasket for the exhaust gas recirculation valve. For the cab you will find air conditioning compressors and tractor seats such as the air suspended GRAMMER Maximo Professional, plus LED work lights from HELLA and others. At the rear there are drawbars and drawbar frames from ROCKINGER, Wabco connector heads for trailer air brakes and PTO shaft ends.

Checking a tired fan clutch

If your 8400 runs hot in summer even with a clean radiator, the fan clutch is a likely suspect. With the engine cold, turn the fan by hand. It should move with light resistance. After a run, with the engine at working temperature, that resistance should be clearly higher. If the fan spins just as easily hot as cold, or there is oil around the hub, the clutch is no longer engaging properly and replacing it is the only real cure. Since the thermostat sits in the same cooling circuit, it makes sense to change it at the same time.

Matching the right part

Start with the serial plate to confirm you are working on an 8400. After that, the quickest route is the reference number on the old part, moulded into a gasket or printed on the housing of a sensor or compressor. Some items fit several John Deere tractors and say so, such as sealing rings listed for the 7R, the 8R and the 8000 range. When in doubt, hold the old part next to the photo and description before you order.

Other tractors in the 8000 range

If you also look after another model from this range, it has its own page showing only the parts listed for that tractor, which keeps you from ordering for the wrong machine.

Every other model from the brand is listed under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart