Menu
EUR

John Deere 8530 tractor parts & technical data

On this page you will find more than 200 parts for the John Deere 8530. Trailer couplings, lighting and electrics are sorted by product group for you.

230 parts found for John Deere 8530
Show:
GRANIT Radiator hose, bottom John Deere 8130-8530
GRANIT
Radiator hose, bottom John Deere 8130-8530
€147,80 €122,15
 
Rear-view mirror 311 x 226 mm, rod-Ø 18 - 22 mm John Deere
5%
Rear-view mirror 311 x 226 mm, rod-Ø 18 - 22 mm John Deere
Width: 226 mm. Length: 311 mm. Rod Ø: 18 - 22 mm.
€492,95 €407,40 €468,30 €387,02
 
ROCKINGER Drawbar frame 330/25/32, 89,3 kN, 2000 kg John Deere
23%
ROCKINGER
Drawbar frame 330/25/32, 89,3 kN, 2000 kg John Deere
To fit as: John Deere Serie 6M, Serie 6R, Serie 8R/8RT, Serie 6000/6000SE, Serie...
€876,65 €724,50 €671,26 €554,76
 
Cover
10%
Cover
€92,32 €76,30 €83,50 €69,01
 
GRANIT Sensor for fuel temperature
5%
GRANIT
Sensor for fuel temperature
€127,17 €105,10 €120,80 €99,83
 
Boost pressure sensor
5%
Boost pressure sensor
Reference no.: RE522723.
€341,22 €282,00 €324,15 €267,89
 
GRANIT Sensor engine oil pressure M10 x 1,5, maximum 100 °C
5%
GRANIT
Sensor engine oil pressure M10 x 1,5, maximum 100 °C
Version: Engine oil pressure. Thread: M10 x 1.5. Temperature: Max. 100 °C.
€55,42 €45,80 €52,60 €43,47
 
Aircon compressor 10PA17C 12 V, pulley Ø 140 mm, 8 grooves John Deere
5%
Aircon compressor 10PA17C 12 V, pulley Ø 140 mm, 8 grooves John Deere
Menke no.: 65259 | Oil quantity (ccm): 200 | For compressor: 10PA17C | Pulley Ø ...
€553,28 €457,26 €525,60 €434,38
 
MAHLE Airco compressor 12 V, pulley Ø 140 mm, 8 grooves, 10PA17C
38%
MAHLE
Airco compressor 12 V, pulley Ø 140 mm, 8 grooves, 10PA17C
Pulley Ø (mm): 140 | For compressor: 10PA17C | Refrigerant: R 134a | Suitable oi...
€595,13 €491,84 €371,95 €307,40
 
Radiator John Deere 8130-8530, 8225R-8345RT
5%
Radiator John Deere 8130-8530, 8225R-8345RT
To fit as: John Deere Series 8R/8RT: 8225R–8345RT; Series 8030/8030T: 8130–8530
€2.765,94 €2.285,90 €2.627,60 €2.171,57
 
GRANIT Nozzle John Deere Al 8225R, WTS 2066
GRANIT
Nozzle John Deere Al 8225R, WTS 2066
€16,45 €13,60
 
Showing 217 - 230 of 230

John Deere 8530 parts for hitching, braking and the engine bay

The 8530 is the big one of the 8030 family, and it spends its days in front of the heaviest trailers and cultivators on the farm. More than 200 parts on this page fit it, supplied by GRANIT, Scharmüller, Sauermann, Rockinger, Walterscheid and others.

Hitch and drawbar

At the rear you can replace drawbars with a ball, drawbar frames and adapter plates. For trailers with a steered axle there are forced steering components, such as an insert that converts a ball hitch to a K50 connection. Fit depends on the rail width and pin diameter of the linkage already on your tractor, so measure before you order.

Air brakes on the trailer

Connector heads and trailer control valves cover the air brake side. If you hear a hiss when coupling up, the rubber seal inside the connector head is a more likely culprit than the line itself. Keep the heads clean and close the dust cover whenever no trailer is attached, since grit and moisture wear that seal quickly. When replacing a head, check the colour: red is for the supply line.

Engine, air conditioning and electrics

  • Sensors, including an engine oil pressure sender and temperature sensors.
  • Seals, sealing rings and O-rings, among them one for the EGR valve.
  • Gear reduction starters for an engine that cranks slowly or not at all.
  • An air conditioning compressor with pulley.
  • LED work lights and beacons for long days and nights.

If you are fitting a new aircon compressor because the old one seized, flush the system and fit a new receiver drier. Otherwise metal debris left in the lines will go straight through the replacement.

At busy times an 8530 often keeps going well after dark. LED work lights give plenty of light while drawing little current, which takes load off the alternator when the air conditioning and beacons are running as well. When swapping old halogen lamps for LED, check that the mounting and plug match, and aim the lamps so they do not dazzle oncoming traffic. A beacon makes the tractor easier to spot when you move wide equipment on the road.

Confirming the fit

Start with the data plate to be certain the tractor is an 8530. For sensors, seals and starters, compare the number on the part you removed with the details listed with each product.

The smaller models in the same range each have their own page with parts matched to that tractor:

Every other tractor from the brand is reachable through the John Deere parts overview.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart