Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

John Deere 8530 tractor parts & technical data

On this page you will find more than 200 parts for the John Deere 8530. Trailer couplings, lighting and electrics are sorted by product group for you.

232 parts found for John Deere 8530
Show:
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€37,38 €30,89
Wiring harness
€114,39 €94,54 €105,24 €86,97
You save 8%
HELLA Rubber plugs push-on pin DIN/ISO 14620
HELLA
Material: Rubber. To fit: Socket pipes. Additional information: • To protect the socket in the socket pipe. DIN/ISO: 14620. More
Material: Rubber. To fit: Socket pipes. Additional information: • To...
€8,91 €7,37
MAHLE Airco compressor 12 V, pulley Ø 140 mm, 8 grooves, 10PA17C
MAHLE
Pulley Ø (mm): 140 | For compressor: 10PA17C | Refrigerant: R 134a | Suitable oil: PAG 46 | Additional information: With sealing ring | No. of groove... More
Pulley Ø (mm): 140 | For compressor: 10PA17C | Refrigerant: R 134a | ...
€621,01 €513,23 €371,95 €307,40
You save 40%
Ball joint 225 mm, M16 x 2, M45 x 2, taper 34,1 - 44 mm
A: 225 mm. C: M16 x 2 mm. D: M45 x 2 mm. E: 34,1 mm. F: 44 mm. Taper: 34,1 - 44 mm. Tube Ø: 61,25 mm. More
A: 225 mm. C: M16 x 2 mm. D: M45 x 2 mm. E: 34,1 mm. F: 44 mm. Taper: ...
€709,53 €586,39 €652,77 €539,48
You save 8%
Ball joint 428 mm, Ø 104,7 mm, M45 x 2
A: 375 mm. C: Ø104,7 mm. D: M45 x 2 mm. More
A: 375 mm. C: Ø104,7 mm. D: M45 x 2 mm.
€947,33 €782,92 €871,54 €720,28
You save 8%
Universal joint 49,2 x 117,48 mm, lateral lubrication
A: 49,2 mm. B: 117,48 mm. Universal joint size: . Lubrication system: Lateral lubrication. More
A: 49,2 mm. B: 117,48 mm. Universal joint size: . Lubrication system: ...
€205,31 €169,68
Radiator cap grommet-Ø 57 mm, height 25 mm, for expansion tank
Version: For expansion tank. Neck Ø: 57 mm. Height: 25 mm. More
Version: For expansion tank. Neck Ø: 57 mm. Height: 25 mm.
€16,00 €13,22
V-belt tensioner Ø 75 mm, 40 mm wide, 24,5 Nm John Deere
€272,97 €225,60 €251,13 €207,55
You save 8%
Turbocharger John Deere 8130-8530, 8225R-8345RT
€4.763,43 €3.936,72 €4.564,86 €3.772,61
You save 4%
Cylinder head bolt special 9/16" x 186 mm John Deere
Dimensions: 9/16" x 186 mm. More
Dimensions: 9/16" x 186 mm.
€24,08 €19,90
Feed pump John Deere 8130-8530, S 560-670, STS 9560i, WTS 9580i
€1.569,46 €1.297,07 €1.443,90 €1.193,31
You save 8%
Gasket uitlaatterugvoerklep John Deere
Description: for EGR valve. More
Description: for EGR valve.
€5,16 €4,27
Turbocharger John Deere 2450-2850, combine 1052
€1.483,89 €1.226,36 €1.422,02 €1.175,23
You save 4%
Cylinder head gasket John Deere 8245R-8360R, 8320RT-8360RT
€110,46 €91,29 €101,62 €83,99
You save 8%
Rear-view mirror glass 299,5 x 215 mm, unheated John Deere
Dimensions: 299.5 x 215 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 2100 mm. More
Dimensions: 299.5 x 215 mm. Version: Unheated. Installation location: ...
€79,55 €65,74 €73,19 €60,48
You save 8%
Wiper blade standard 500 mm, 20 inch John Deere SE6100-SE6920
Length: 500 mm. Length: 20 inches. Version: Standard. More
Length: 500 mm. Length: 20 inches. Version: Standard.
€25,65 €21,20
BOSCH Wiper blade Twin 500 / 500 mm - 2 pieces John Deere
BOSCH
Length: 500 / 500 mm. Length: 20 / 20 inches. Version: Front. Part no.: 790. Reference no.: 3397118560. More
Length: 500 / 500 mm. Length: 20 / 20 inches. Version: Front. Part no....
€36,38 €30,06
LED work lights spotlight 30 W, 2900 lm, 166 x 65 x 106 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€71,12 €58,78 €65,43 €54,07
You save 8%
Sensor trekkrachtmeting three-point parts (EHR)
Version: For tractive force measurement (electronic linkage control). More
Version: For tractive force measurement (electronic linkage control).
€318,54 €263,26 €293,06 €242,20
You save 8%
Track rod complete 495,5 mm, M45 x 2
A: 495,5 mm. D: M45 x 2 mm. More
A: 495,5 mm. D: M45 x 2 mm.
€1.381,11 €1.141,41 €1.270,62 €1.050,10
You save 8%
Connecting rod John Deere 8130-8530, 8225R-8360R
€455,81 €376,70 €419,35 €346,57
You save 8%
Seal thermostat John Deere
Injector John Deere 8130-8530
€703,60 €581,49 €647,31 €534,97
You save 8%
Sensor fuel temperature John Deere
€132,70 €109,67 €122,08 €100,90
You save 8%
V-belt air pressure system 8 ribs John Deere 8130-8530
Ribs: 8 n. Version: For compressed air system. Description: For compressed air system. More
Ribs: 8 n. Version: For compressed air system. Description: For compre...
€164,33 €135,81 €151,18 €124,95
You save 8%
Thermostat Ø 54 mm, 79,5 °C John Deere
Ø: 54 mm. Temperature: 79.5 °C. More
Ø: 54 mm. Temperature: 79.5 °C.
€37,13 €30,68
Seal water pump John Deere
€36,88 €30,48 €33,93 €28,04
You save 8%
Air hose intercooler Ø 76 mm, 127 mm John Deere
Inner Ø: 76 mm. Length: 127 mm. More
Inner Ø: 76 mm. Length: 127 mm.
€124,87 €103,20 €114,88 €94,94
You save 8%
Main bearing standard John Deere
€46,65 €38,55 €42,92 €35,47
You save 8%
Oil cooler John Deere 4240, 4055-4455
€296,30 €244,88 €272,60 €225,29
You save 8%
Gas strut 125 N, 385 mm, stroke 154 mm John Deere Series 7020-9630T
Newtons: 125. A: 385 mm. B: 190 mm. C: 10 mm. D: 10 mm. Stroke: 154 mm. d1: 6 mm. d2: 15 mm. Form: 6. Menke no.: 221635. More
Newtons: 125. A: 385 mm. B: 190 mm. C: 10 mm. D: 10 mm. Stroke: 154 mm...
€79,04 €65,32 €72,72 €60,10
You save 8%
Hose screenwash tank Ø 3 mm - 5 meter John Deere
Hose Ø: 3 mm. Length: 5 mtr.. More
Hose Ø: 3 mm. Length: 5 mtr..
€8,21 €6,79
Fixture John Deere
€35,51 €29,35
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
Scharmüller
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Overhang: 360 mm. Hole: 30,5 mm. ... More
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hi...
€1.465,37 €1.211,05
ROCKINGER Pin for trailer coupling 31 mm John Deere Roe 7730-8530
ROCKINGER
Version: Kippverriegelung. A: 31 mm. More
Version: Kippverriegelung. A: 31 mm.
€92,55 €76,49 €71,31 €58,93
You save 23%
Oil pressure switch transmission oil pressure
Version: Transmission oil pressure. More
Version: Transmission oil pressure.
€181,19 €149,74 €166,69 €137,76
You save 8%
Start safety switch contact function, M 16 x 1
Version: Contact function, Thread: M 16 x 1, With screw connection. More
Version: Contact function, Thread: M 16 x 1, With screw connection.
€37,43 €30,94
Push button switch PTO shaft 48 V, button yellow, make contact, Ø 30 mm
Version: 48 V switching voltage, Yellow button, make contact, Total button travel: 5 mm, Ø 30 mm, AMP plug connection (Superseal 3 x 1.5), dustproof ... More
Version: 48 V switching voltage, Yellow button, make contact, Total bu...
€46,81 €38,69 €43,07 €35,59
You save 8%
Showing 97 - 144 of 232

John Deere 8530 parts for hitching, braking and the engine bay

The 8530 is the big one of the 8030 family, and it spends its days in front of the heaviest trailers and cultivators on the farm. More than 200 parts on this page fit it, supplied by GRANIT, Scharmüller, Sauermann, Rockinger, Walterscheid and others.

Hitch and drawbar

At the rear you can replace drawbars with a ball, drawbar frames and adapter plates. For trailers with a steered axle there are forced steering components, such as an insert that converts a ball hitch to a K50 connection. Fit depends on the rail width and pin diameter of the linkage already on your tractor, so measure before you order.

Air brakes on the trailer

Connector heads and trailer control valves cover the air brake side. If you hear a hiss when coupling up, the rubber seal inside the connector head is a more likely culprit than the line itself. Keep the heads clean and close the dust cover whenever no trailer is attached, since grit and moisture wear that seal quickly. When replacing a head, check the colour: red is for the supply line.

Engine, air conditioning and electrics

  • Sensors, including an engine oil pressure sender and temperature sensors.
  • Seals, sealing rings and O-rings, among them one for the EGR valve.
  • Gear reduction starters for an engine that cranks slowly or not at all.
  • An air conditioning compressor with pulley.
  • LED work lights and beacons for long days and nights.

If you are fitting a new aircon compressor because the old one seized, flush the system and fit a new receiver drier. Otherwise metal debris left in the lines will go straight through the replacement.

At busy times an 8530 often keeps going well after dark. LED work lights give plenty of light while drawing little current, which takes load off the alternator when the air conditioning and beacons are running as well. When swapping old halogen lamps for LED, check that the mounting and plug match, and aim the lamps so they do not dazzle oncoming traffic. A beacon makes the tractor easier to spot when you move wide equipment on the road.

Confirming the fit

Start with the data plate to be certain the tractor is an 8530. For sensors, seals and starters, compare the number on the part you removed with the details listed with each product.

The smaller models in the same range each have their own page with parts matched to that tractor:

Every other tractor from the brand is reachable through the John Deere parts overview.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart