Menu
EUR

John Deere 8530 tractor parts & technical data

On this page you will find more than 200 parts for the John Deere 8530. Trailer couplings, lighting and electrics are sorted by product group for you.

230 parts found for John Deere 8530
Show:
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
18%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.058,75 €875,00 €873,45 €721,86
 
ROCKINGER Pin for trailer coupling 31 mm John Deere Roe 7730-8530
23%
ROCKINGER
Pin for trailer coupling 31 mm John Deere Roe 7730-8530
Version: Kippverriegelung. A: 31 mm.
€93,12 €76,96 €71,30 €58,93
 
HELLA Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
HELLA
Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: ...
€139,80 €115,54
 
GRANIT Contact switch lifting unit operation built-in rear on the fender
GRANIT
Contact switch lifting unit operation built-in rear on the fender
Version: Lifting unit operation, Mounting: on the rear mudguard.
€114,60 €94,71
 
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
18%
Walterscheid
Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 |...
€2.169,53 €1.793,00 €1.789,85 €1.479,21
 
Wabco Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
10%
Wabco
Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 | Pressure ...
€666,37 €550,72 €602,90 €498,26
 
WAECO PAG-compressor oil ISO 46, R134a - 250 ml can
WAECO
PAG-compressor oil ISO 46, R134a - 250 ml can
€23,95 €19,79
 
Cobo Rear light left / right 12 V John Deere 7600 - 9620RX
5%
Cobo
Rear light left / right 12 V John Deere 7600 - 9620RX
Test mark: ECE | Bulb: 12V21WK / P21W 12V21/5WK / P21/5W | Additional informatio...
€61,71 €51,00 €58,60 €48,43
 
GRANIT Track rod complete 495,5 mm, M45 x 2
5%
GRANIT
Track rod complete 495,5 mm, M45 x 2
A: 495,5 mm. D: M45 x 2 mm.
€1.323,53 €1.093,83 €1.257,35 €1.039,13
 
Starter ring gear Ø 385/415 mm, 129 teeth John Deere
5%
Starter ring gear Ø 385/415 mm, 129 teeth John Deere
Version: Ø 385/415, 129 teeth.
€97,51 €80,59 €92,60 €76,53
 
ROCKINGER Forced steering right K50, Rockinger drawbar frame 787880K01140
20%
ROCKINGER
Forced steering right K50, Rockinger drawbar frame 787880K01140
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hitch support...
€703,31 €581,25 €565,46 €467,32
 
GRANIT Multi-rib belt 1130 mm, 31,75 mm, thickness 19 mm John Deere 8130-9370R
5%
GRANIT
Multi-rib belt 1130 mm, 31,75 mm, thickness 19 mm John Deere 8130-9370R
€165,62 €136,88 €157,30 €130,00
 
V-belt air pressure system 8 ribs John Deere 8130-8530
5%
V-belt air pressure system 8 ribs John Deere 8130-8530
Ribs: 8 n. Version: For compressed air system. Description: For compressed air s...
€157,48 €130,15 €149,60 €123,64
 
O-ring thermostat John Deere
O-ring thermostat John Deere
€8,90 €7,36
 
Tank cap reservoir grommet-Ø 58 mm
Tank cap reservoir grommet-Ø 58 mm
Version: For expansion tank. Neck Ø: 58 mm.
€37,65 €31,12
 
Wiper blade standard 500 mm, 20 inch John Deere SE6100-SE6920
Wiper blade standard 500 mm, 20 inch John Deere SE6100-SE6920
Length: 500 mm. Length: 20 inches. Version: Standard.
€24,55 €20,29
 
BOSCH Wiper blade Twin 500 / 500 mm - 2 pieces John Deere
BOSCH
Wiper blade Twin 500 / 500 mm - 2 pieces John Deere
Length: 500 / 500 mm. Length: 20 / 20 inches. Version: Front. Part no.: 790. Ref...
€34,85 €28,80
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
12%
Scharmüller
Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Versi...
€1.526,39 €1.261,48 €1.349,90 €1.115,62
 
ROCKINGER Drawbar with Piton fix 89,3 kN, rail width 330 mm John Deere
ROCKINGER
Drawbar with Piton fix 89,3 kN, rail width 330 mm John Deere
D-value: 89,3 kN. Detent pin Ø: 25 mm. Guide width: 32 mm. Rail width: 330 mm. L...
€1.733,96 €1.433,02
 
Relays changeover contact 12 V / 30 - 40 A, 5-pin, without bracket
Relays changeover contact 12 V / 30 - 40 A, 5-pin, without bracket
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal.
€14,15 €11,69
 
GRANIT Solenoid switch starter motor 12 V, 80 A, with screw connection
10%
GRANIT
Solenoid switch starter motor 12 V, 80 A, with screw connection
Version: 12 V / 80 A With screw connections.
€68,83 €56,88 €62,25 €51,45
 
Sensor trekkrachtmeting three-point parts (EHR)
10%
Sensor trekkrachtmeting three-point parts (EHR)
Version: For tractive force measurement (electronic linkage control).
€320,52 €264,89 €289,95 €239,63
 
Showing 49 - 72 of 230

John Deere 8530 parts for hitching, braking and the engine bay

The 8530 is the big one of the 8030 family, and it spends its days in front of the heaviest trailers and cultivators on the farm. More than 200 parts on this page fit it, supplied by GRANIT, Scharmüller, Sauermann, Rockinger, Walterscheid and others.

Hitch and drawbar

At the rear you can replace drawbars with a ball, drawbar frames and adapter plates. For trailers with a steered axle there are forced steering components, such as an insert that converts a ball hitch to a K50 connection. Fit depends on the rail width and pin diameter of the linkage already on your tractor, so measure before you order.

Air brakes on the trailer

Connector heads and trailer control valves cover the air brake side. If you hear a hiss when coupling up, the rubber seal inside the connector head is a more likely culprit than the line itself. Keep the heads clean and close the dust cover whenever no trailer is attached, since grit and moisture wear that seal quickly. When replacing a head, check the colour: red is for the supply line.

Engine, air conditioning and electrics

  • Sensors, including an engine oil pressure sender and temperature sensors.
  • Seals, sealing rings and O-rings, among them one for the EGR valve.
  • Gear reduction starters for an engine that cranks slowly or not at all.
  • An air conditioning compressor with pulley.
  • LED work lights and beacons for long days and nights.

If you are fitting a new aircon compressor because the old one seized, flush the system and fit a new receiver drier. Otherwise metal debris left in the lines will go straight through the replacement.

At busy times an 8530 often keeps going well after dark. LED work lights give plenty of light while drawing little current, which takes load off the alternator when the air conditioning and beacons are running as well. When swapping old halogen lamps for LED, check that the mounting and plug match, and aim the lamps so they do not dazzle oncoming traffic. A beacon makes the tractor easier to spot when you move wide equipment on the road.

Confirming the fit

Start with the data plate to be certain the tractor is an 8530. For sensors, seals and starters, compare the number on the part you removed with the details listed with each product.

The smaller models in the same range each have their own page with parts matched to that tractor:

Every other tractor from the brand is reachable through the John Deere parts overview.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart