Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

556 parts found for John Deere 1550
Show:
KS Piston set, complete Ø 106,5 mm, piston pin Ø 34,93 mm, John Deere
KS
Dimensions: 3 rings, Ø 106.5 mm, Gudgeon pin Ø 34.93 x 84.4 mm, Combustion chamber Ø 58.4 mm, Combustion chamber depth 18.75 mm, Ring carrier pisto... More
Dimensions: 3 rings, Ø 106.5 mm, Gudgeon pin Ø 34.93 x 84.4 mm, Comb...
€303,65 €250,95 €279,36 €230,87
You save 8%
V-belt for compressed air system John Deere 1550-2850
Description: For compressed air system. More
Description: For compressed air system.
€58,52 €48,36 €53,84 €44,49
You save 8%
V-belt with compressed air John Deere 1550-2850
Description: For compressed air system. More
Description: For compressed air system.
€58,52 €48,36 €53,84 €44,49
You save 8%
Thermostat Ø 54 mm, 82 °C
Cover
€12,74 €10,53
Bleed screw fuel filter 8001033 John Deere 820-4850
Description: For fuel filter 8001033 (AR50041). More
Description: For fuel filter 8001033 (AR50041).
€6,41 €5,30
Thermostat Ø 54 mm, 88 °C John Deere
Ø: 54 mm. Temperature: 88 °C. More
Ø: 54 mm. Temperature: 88 °C.
€20,85 €17,23
Filler cap hydraulic block Ø 38 mm John Deere
Dimensions: Ø: 38 mm. More
Dimensions: Ø: 38 mm.
€33,98 €28,08
Exhaust manifold outer-Ø 62 mm John Deere 820-3210
Version: Outer Ø: 62 mm. More
Version: Outer Ø: 62 mm.
€170,43 €140,85 €156,80 €129,58
You save 8%
Silencer lower 410 mm, inner-Ø 55 mm John Deere
Version: Length: 410 mm, Inner Ø: 55 mm. More
Version: Length: 410 mm, Inner Ø: 55 mm.
€298,22 €246,46 €274,36 €226,75
You save 8%
Cylinder head bolt 1/2" x 112 mm John Deere
Dimensions: 1/2" x 112 mm. More
Dimensions: 1/2" x 112 mm.
€8,91 €7,37
Oil pump John Deere 310-3650
Menke no.: 80754. More
Menke no.: 80754.
€119,00 €98,35 €109,48 €90,48
You save 8%
End control unit John Deere 830-3650
€378,42 €312,74 €348,15 €287,72
You save 8%
Seal kit hydraulic pump John Deere 830-3650
Menke no.: 221636. More
Menke no.: 221636.
€69,82 €57,70 €64,23 €53,09
You save 8%
GRAMMER Tractor seat Compacto Basic W MSG83/721 mechanical suspension, fabric
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 480 mm. Fore/aft isolator: Optional. ... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.137,76 €940,30 €1.046,74 €865,07
You save 8%
Windshield frame shock absorber 130 N, 810 mm, stroke 358 mm John Deere MC 1
suitable for: Frontscheibe. Newtons: 130. A: 810 mm. B: 390 mm. C: 8 mm. D: 8 mm. Form: 3. d1: 8 mm. d2: 18 mm. Stroke: 358 mm. To fit: Windscreen. More
suitable for: Frontscheibe. Newtons: 130. A: 810 mm. B: 390 mm. C: 8 m...
€71,71 €59,26 €65,97 €54,52
You save 8%
Gas strut roof window 160 N, 225 mm, stroke 65 mm John Deere, Case IH
suitable for: Dachluke. Newtons: 160. A: 225 mm. B: 125 mm. C: 6 mm. D: 6 mm. d1: 6 mm. d2: 15 mm. Stroke: 65 mm. Connection 1: AUGE metal. Connection... More
suitable for: Dachluke. Newtons: 160. A: 225 mm. B: 125 mm. C: 6 mm. D...
€33,61 €27,78
Door lock, left John Deere MC 1, SG 2, Ford Al 545-1720
€98,23 €81,18 €90,37 €74,69
You save 8%
Lift arm shaft 510 mm, Ø 1 1/8 inch, 28 mm John Deere 1350-2850
Dimensions: Length = 510, Ø = 1 1/8", 28 mm. Menke no.: 73807. More
Dimensions: Length = 510, Ø = 1 1/8", 28 mm. Menke no.: 73807.
€171,47 €141,71 €157,75 €130,37
You save 8%
Thrust washer 21,5 x 36,4 x 1 mm John Deere 840-2120, 1350-1950
Dimensions: 21.5 x 36.4 x 1 mm. More
Dimensions: 21.5 x 36.4 x 1 mm.
€1,61 €1,33
Shim lift arm shaft 21 x 25 x 5 mm John Deere 830-1850
Dimensions: 21 x 25 x 5 mm. More
Dimensions: 21 x 25 x 5 mm.
€2,60 €2,15
Gasket set lifting block John Deere series 40, series 50
€60,73 €50,19 €55,87 €46,17
You save 8%
Lifting strut complete left 560 - 760 mm, eye-Ø 19,5 mm John Deere
Dimensions: Length = 560 - 760, Eye Ø = 19.5 mm. More
Dimensions: Length = 560 - 760, Eye Ø = 19.5 mm.
€424,25 €350,62 €390,31 €322,57
You save 8%
Lift rod right 610 - 760 mm, eye Ø 19,5 mm John Deere 820-2140
Dimensions: Length = 610 - 760, Eye Ø = 19.5 mm. More
Dimensions: Length = 610 - 760, Eye Ø = 19.5 mm.
€768,31 €634,97 €706,85 €584,17
You save 8%
Pin 16 x 62,5 mm John Deere 940-2850
Dimensions: 16 x 62.5 mm. More
Dimensions: 16 x 62.5 mm.
€18,08 €14,94
Threaded spindle 1 1/8" UNC right-hand thread, cat. 2, B 145 mm, G 307 mm
I: 1 1/8" UNC mm. Version: Right-hand thread. A: 25,4 mm. B: 175 mm. C: 51 mm. G: 337 mm. F: 162 mm. Category: 2 / 25.4. Menke no.: 54297. More
I: 1 1/8" UNC mm. Version: Right-hand thread. A: 25,4 mm. B: 175 mm. C...
€40,29 €33,30 €37,07 €30,63
You save 8%
Cover John Deere 1550-2850
€328,41 €271,41 €302,14 €249,70
You save 8%
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€37,38 €30,89
HELLA Relays relays make contact 12 V / 50 A, 4-pin, with holder
HELLA
Version: • With resistor for suppressing inductive interference voltage peaks. Colour: Black. Power rating max. 12 V: 50. Protection class: 54. Swit... More
Version: • With resistor for suppressing inductive interference volt...
€20,91 €17,28
Brake light switch oil pressure 1/8" NPT, 2,8 - 6,3 bar, neutral position off
Version: Thread 1/8" NPT, 2.8 - 6.3 bar, normally off, make contact. More
Version: Thread 1/8" NPT, 2.8 - 6.3 bar, normally off, make contact.
€22,98 €18,99
Hose inner-Ø 5 mm, outer-Ø 12 mm, material thickness 3,5 mm - 1 meter
Injection nozzle John Deere 510-3350
To fit as: John Deere 510, 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630, 2030, 2130, 3130, 840, 940, 1040, 1140, 1640, 1840, 2040, 3040, 3140, 135... More
To fit as: John Deere 510, 820, 920, 1020, 1120, 830, 930, 1030, 1130,...
€79,67 €65,84 €73,30 €60,58
You save 8%
MAHLE Airco compressor 12 V, pulley Ø 140 mm, 8 grooves, 10PA17C
MAHLE
Pulley Ø (mm): 140 | For compressor: 10PA17C | Refrigerant: R 134a | Suitable oil: PAG 46 | Additional information: With sealing ring | No. of groove... More
Pulley Ø (mm): 140 | For compressor: 10PA17C | Refrigerant: R 134a | ...
€621,01 €513,23 €371,95 €307,40
You save 40%
HELLA Alternator 14 V, 70 A, pulley Ø 82 mm, 1 groove John Deere
HELLA
Nominal values (V / A): 14 / 70 | No. of grooves: 1 | Charging current (A): 70 | Nominal voltage (V): 14 | Additional information: With pulley | Pulle... More
Nominal values (V / A): 14 / 70 | No. of grooves: 1 | Charging current...
€516,87 €427,17 €398,25 €329,13
You save 23%
Ball joint taper 19,9 - 22,2 mm, M18 x 1,5, M24 x 1,5, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,2 mm. Taper: 19,9 - 22,2 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,2 mm. T...
€38,19 €31,56 €35,13 €29,04
You save 8%
Track rod 1345 mm, M18 x 1,5, 20 - 22 mm, 32 mm
A: 1345 mm. B: M18 x 1,5 mm. C: 20 - 22 mm. G: . D: M24 x 1,5 mm. E: 32 mm. More
A: 1345 mm. B: M18 x 1,5 mm. C: 20 - 22 mm. G: . D: M24 x 1,5 mm. E: 3...
€156,16 €129,06 €143,67 €118,73
You save 8%
Ball joint 150 mm, M14 x 1,5, taper 16,5 - 18,5 mm
A: 150 mm. C: M14 x 1,5 mm. D: M27 x 1,5 mm. E: 16,5 mm. F: 18,5 mm. Taper: 16,5 - 18,5 mm. More
A: 150 mm. C: M14 x 1,5 mm. D: M27 x 1,5 mm. E: 16,5 mm. F: 18,5 mm. T...
€54,52 €45,06 €50,16 €41,45
You save 8%
Ball joint 240 mm, M14 x 1,5, 20 mm, taper 16,2 - 18,7 mm
A: 240 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,7 mm. Taper: 16,2 - 18,7 mm. More
A: 240 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,7 mm. Taper: 1...
€77,30 €63,88 €71,12 €58,77
You save 8%
Ball joint 284 mm, taper 20 - 22,2 mm, M18 x 1,5 / M18 x 1,5
A: 284 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 284 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tap...
€76,57 €63,28 €70,44 €58,22
You save 8%
Track rod 515 mm, M28 x 1,5, taper 19,9 - 22,25 mm, Ø 40 mm
A: 515 mm. D: M28 x 1,5 mm. E: 19,9 mm. F: 22,25 mm. Taper: 19,9 - 22,25 mm. Tube Ø: 40 mm. More
A: 515 mm. D: M28 x 1,5 mm. E: 19,9 mm. F: 22,25 mm. Taper: 19,9 - 22,...
€220,58 €182,30 €202,93 €167,71
You save 8%
Showing 193 - 240 of 556

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart