Menu
EUR

John Deere 2040S tractor parts & technical data

The John Deere 2040S from the 40 series gets its own overview here, with more than 350 parts such as lighting, electrics and engine components.

371 parts found for John Deere 2040S
Show:
Track rod 1100 mm, M24 x 1,5, taper 19,9 - 22,25 mm, line-Ø 30 mm
A: 1100 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,25 mm. Taper: 19,9 - 22,25 mm. Tube Ø: 30 mm. More
A: 1100 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,25 mm. Taper: 19,9 - 22...
€113,65 €93,93 €104,56 €86,41
You save 8%
Universal joint 30 x 83 mm, 1x outer lubrication / centralised lubrication
A: 30 mm. B: 83 mm. Universal joint size: . Lubrication system: 1 x external lubrication/centralised lubrication. More
A: 30 mm. B: 83 mm. Universal joint size: . Lubrication system: 1 x ex...
€57,80 €47,77 €53,18 €43,95
You save 8%
Danfoss Orbitrol OSPB 100 CN John Deere Series 40-3340
Danfoss
Type: OSPB 100 CN / 150-0173. More
Type: OSPB 100 CN / 150-0173.
€1.099,28 €908,50 €1.011,34 €835,82
You save 8%
Set of parts feed pump John Deere engine 3164-6359
€52,55 €43,43 €48,35 €39,96
You save 8%
Set of parts for shafts Ø 28 mm, length 510 mm John Deere series 30, 40
Dimensions: Shaft length = 510, Ø = 28 mm. More
Dimensions: Shaft length = 510, Ø = 28 mm.
€211,31 €174,64 €194,41 €160,67
You save 8%
Push button switch hazard lights, button red with bulb, Ø 30 mm
Version: Push button operation, With bulb, red button with warning symbol, Connection cable with 7 blade terminals 6.3 x 0.8 mm, without 30b, Mounting... More
Version: Push button operation, With bulb, red button with warning sym...
€108,09 €89,33 €99,44 €82,18
You save 8%
Single clutch 320GDVM 41,5 x 44,8 mm, 27 splines John Deere
Dimensions (mm): 41.5 x 44.8, 27 grooves | Flywheel dimension (mm): 21,6 | Additional information: Made in Germany More
Dimensions (mm): 41.5 x 44.8, 27 grooves | Flywheel dimension (mm): 21...
€630,05 €520,70 €579,65 €479,05
You save 8%
External plate thickness 1,35 mm, inner 99 mm, outer 155 mm
Version: thickness = 1,35 mm inner = 99 mm outer = 155 mm More
Version: thickness = 1,35 mm inner = 99 mm outer = 155 mm
€47,02 €38,86 €43,26 €35,75
You save 8%
Internal plate Hi-Lo 2,3 mm, inner 152,3 mm, outer 191,9 mm, 6 teeth
Version: thickness = 2,3 mm inner = 152,3 mm outer = 191,9 mm 6 teeth More
Version: thickness = 2,3 mm inner = 152,3 mm outer = 191,9 mm 6 teeth
€49,74 €41,11 €45,76 €37,82
You save 8%
Internal plate PTO clutch 2,5 mm, inner 92,8 mm, outer 133,2 mm
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines More
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines
€34,33 €28,37
Internal plate PTO clutch 1,6 mm, inner 92,8 mm, outer 133,2 mm
Version: thickness = 1,6 mm inner = 92,8 mm outer = 133,2 mm, 45 teeth More
Version: thickness = 1,6 mm inner = 92,8 mm outer = 133,2 mm, 45 teeth
€26,15 €21,61
AKS-Dasis Thermal fuse airco John Deere 40 and 50 series
AKS-Dasis
Weight (g): 37 | Weight (kg): 0.037 More
Weight (g): 37 | Weight (kg): 0.037
€11,13 €9,19
LUK Clutch plate 320TSFA 1 1/4 inch, 10 splines John Deere 2040 - 3640
LUK
Dimensions (inches): 1 1/4"" 10 grooves | Material specifications: Organic clutch lining More
Dimensions (inches): 1 1/4"" 10 grooves | Material specifications: Org...
€497,15 €410,87 €457,38 €378,00
You save 8%
Clutch plate 320 25,8 x 32,1 mm, 10 splines, torsion damper
Additional information: Made in Germany | Contents: Clutch (44512013), disc (44512014) | Dimensions (mm): 25.8 x 32.1, 10 grooves More
Additional information: Made in Germany | Contents: Clutch (44512013),...
€395,05 €326,49 €363,45 €300,37
You save 8%
Alternator 14 V / 65 A, flange 52,8 mm, pulley Ø 63 mm
Belt width (mm) / type: PV x 8 | Form: B | Mounting L / d / R (mm): 52,8 / 8,5 / 88,25 | Nominal values (V / A): 14 / 65 | Charging current (A): 65 | ... More
Belt width (mm) / type: PV x 8 | Form: B | Mounting L / d / R (mm): 52...
€171,06 €141,37 €157,38 €130,06
You save 8%
HELLA Alternator 14 V, 33 A, pulley Ø 92 mm, 1 groove
HELLA
Nominal values (V / A): 14 / 33 | No. of grooves: 1 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: With pulley | Pulle... More
Nominal values (V / A): 14 / 33 | No. of grooves: 1 | Charging current...
€359,31 €296,95 €276,84 €228,79
You save 23%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise
€501,81 €414,72 €300,55 €248,39
You save 40%
MAHLE Starter motor 12 V, 2,7 kW, 10 teeth, clockwise, mounting Ø 82,5 mm
€473,84 €391,60 €283,81 €234,55
You save 40%
Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 259 mm
€315,70 €260,91 €290,44 €240,04
You save 8%
HELLA Starter motor 12 V, 3,1 kW, 10 teeth, Ø 83 mm, clockwise
€678,75 €560,95 €522,97 €432,20
You save 23%
HELLA Starter motor 12 V, 3 kW, 11 teeth, Ø 83 mm, clockwise
€824,78 €681,64 €635,48 €525,19
You save 23%
Ball joint 70 mm, M27 x 1,5, M24 x 1,5, 28,8 - 32,3 mm
A: 70 mm. C: M27 x 1,5 mm. D: M24 x 1,5 mm. E: 28,8 mm. F: 32,3 mm. Taper: 28,8 - 32,3 mm. More
A: 70 mm. C: M27 x 1,5 mm. D: M24 x 1,5 mm. E: 28,8 mm. F: 32,3 mm. Ta...
€91,69 €75,78 €84,35 €69,71
You save 8%
Ball joint 95 mm, M18 x 1,5, M24 x 1,5, taper 20 - 22,2 mm
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tape...
€53,78 €44,45 €49,48 €40,89
You save 8%
Brake plate 14 mm, Ø 221 x 307 mm John Deere 2130-3130
€189,77 €156,83 €174,59 €144,29
You save 8%
Push rod 230 mm John Deere Series 5E-6600, SE6200-SE6300
Dimensions: Length 230 mm. More
Dimensions: Length 230 mm.
€27,54 €22,76
Cylinder head gasket set upper engine 4219D-4276 John Deere
€58,18 €48,08 €53,53 €44,24
You save 8%
Gas strut roof window or rear window 300 N, 240 mm, stroke 91 mm John Deere
Newtons: 300. A: 240 mm. B: 130 mm. C: 6 mm. D: 6 mm. Stroke: 91 mm. d1: 6 mm. d2: 15 mm. To fit: Roof hatch or rear window. Form: 8. More
Newtons: 300. A: 240 mm. B: 130 mm. C: 6 mm. D: 6 mm. Stroke: 91 mm. d...
€49,89 €41,23 €45,90 €37,93
You save 8%
BOSCH Flasher unit 12 V, 2+1+1 (8) x 21 W, 6 connections, lip upper
BOSCH
Version: 12 V / 2 + 1 + 1(8) x 21 W, Lug at top, 1 hole Ø 6.4 mm, With hazard warning light function. Fig.: 3E. Vehicle makes: Huerlimann, John Deere... More
Version: 12 V / 2 + 1 + 1(8) x 21 W, Lug at top, 1 hole Ø 6.4 mm, Wit...
€102,90 €85,04 €87,22 €72,08
You save 15%
Start safety switch 9/16 inch UNF, standard open
Version: Make contact (contact function), Thread: 9/16" UNF, With screw connection. More
Version: Make contact (contact function), Thread: 9/16" UNF, With scre...
€40,67 €33,61 €37,42 €30,92
You save 8%
Clutch kit flywheel 21,6 mm John Deere 2140-3640
To fit as: John Deere 3120, 2130, 3130, 2040S, 2140, 3040, 3140, 3340, 3640, 2650, 2850, 3050, 3150, 3350 More
To fit as: John Deere 3120, 2130, 3130, 2040S, 2140, 3040, 3140...
€829,63 €685,64 €813,26 €672,12
You save 2%
HELLA Bulb R10W 12 V, 10 W, BA15s - 10 pieces
HELLA
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | Power (watts): 10 More
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | P...
€18,94 €15,65
HELLA Lens indicator/position light P21W/C5W, with screws - 2 pieces
HELLA
Version: With bolts | Light function: with position light, with turn signal light | Test mark: E1 42712, ECE | Bulb: P21W, C5W | Installation location... More
Version: With bolts | Light function: with position light, with turn s...
€33,15 €27,40
LUK Clutch plate 22,3 x 25,8 mm, 15 splines, sintered John Deere
LUK
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Sin...
€434,09 €358,75 €399,36 €330,05
You save 8%
LUK Clutch plate 320TDCA 1 1/4 inch, 10 splines John Deere 1020 - 3340
LUK
Dimensions (inches): 1 1/4"" 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (inches): 1 1/4"" 10 grooves | Material specifications: Sin...
€397,22 €328,28 €365,44 €302,02
You save 8%
MAHLE Alternator 14 V / 55 A, flange 56 mm, pulley-Ø 87 mm, form B
MAHLE
Flange size (mm): 56,0 | Additional information: Dust-tight | Installation angle (°): 0 | Belt width (mm) / type: 15,2 | Nominal values (V / A): 14 /... More
Flange size (mm): 56,0 | Additional information: Dust-tight | Installa...
€234,03 €193,41 €140,16 €115,84
You save 40%
Internal plate 4wd 1,5 mm, inner 79,5 mm, outer 141 mm
Version: thickness = 1,5 mm inner = 79,5 mm outer = 141 mm More
Version: thickness = 1,5 mm inner = 79,5 mm outer = 141 mm
€44,34 €36,64 €40,79 €33,71
You save 8%
External plate thickness 2,3 mm, inner 168 mm, outer 195 mm, 6 teeth
Version: thickness = 2,3 mm inner = 168 mm outer = 195 mm 6 teeth More
Version: thickness = 2,3 mm inner = 168 mm outer = 195 mm 6 teeth
€34,41 €28,44 €31,66 €26,16
You save 8%
External plate 1,5 mm, inner 99 mm, outer 152 mm, 6 teeth John Deere
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth More
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth
€40,51 €33,48 €37,27 €30,80
You save 8%
LUK Thrust bearing with housing 49,5 x 93,5 mm John Deere 820 - 3350
LUK
Dimensions (mm): 49.5 x 93.5 More
Dimensions (mm): 49.5 x 93.5
€162,26 €134,10 €149,28 €123,37
You save 8%
Single clutch refurbishment 41,5 x 44,8 mm, 27 key John Deere
Additional information: Made in Germany | Dimensions (mm): 41.5 x 44.8, 27 grooves | Flywheel dimension (mm): 21,6 More
Additional information: Made in Germany | Dimensions (mm): 41.5 x 44.8...
€595,24 €491,93 €547,62 €452,58
You save 8%
Single clutch G 320 N 41,5 x 44,8 mm, 27 splines John Deere
Flywheel dimension (mm): 21,6 | Additional information: Made in Germany | Dimensions (mm): 41.5 x 44.8, 27 grooves More
Flywheel dimension (mm): 21,6 | Additional information: Made in German...
€1.040,41 €859,84 €957,18 €791,06
You save 8%
Alternator 14 V / 55 A, pulley-Ø 87 mm, flange 56 mm John Deere
Installation angle (°): 0 | Belt tension hole Ø / R (mm): M8 / 84,5 | Pulley spacing (mm): 27,0 | Form: B | Nominal values (V / A): 14 / 55 | Belt w... More
Installation angle (°): 0 | Belt tension hole Ø / R (mm): M8 / 84,5 ...
€188,23 €155,56 €173,17 €143,12
You save 8%
HELLA Alternator 14 V / 65 A, pulley Ø 82 mm, 1 groove, Fendt, John Deere
HELLA
Nominal values (V / A): 14 / 65 | No. of grooves: 1 | Charging current (A): 65 | Nominal voltage (V): 14 | Additional information: With pulley | Pulle... More
Nominal values (V / A): 14 / 65 | No. of grooves: 1 | Charging current...
€384,41 €317,69 €296,18 €244,78
You save 23%
FEBI Feed pump 2 hole, 45 mm, flange 30 mm, thread 10x1 John Deere
FEBI
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 840, 940, 1040, 1140, 18... More
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 83...
€55,76 €46,08 €48,48 €40,07
You save 13%
BOSCH Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, clockwise
€446,52 €369,02 €430,04 €355,41
You save 4%
Showing 49 - 96 of 371

John Deere 2040S parts for clutch, engine and steering

Keeping a John Deere 2040S at work means dealing with the jobs an older tractor brings: a clutch, an alternator, a weeping gasket. For this member of the John Deere 40 series, this page lists more than 350 parts from GRANIT, HELLA, LUK, MAHLE and VICTOR REINZ.

Clutch work

There are clutch plates, single clutch assemblies and internal plates, partly from LUK. Once the tractor is split, replace the clutch plate and pressure plate together. Splitting engine from gearbox is the costly part of the job, not the parts. Check the flywheel for heat spots and scoring and have it skimmed if needed, then use an alignment tool so the input shaft slides through the new plate without forcing.

Engine seals and electrics

For the engine there are gaskets, seals, O-rings and sealing rings, such as a seal for the feed pump, an O-ring for the oil pump and sealing rings for the injection nozzles. There is also a gasket for the lift housing. Always use new nozzle sealing rings, because a used one is already crushed and will not seal reliably a second time.

Alternators and starter motors come in several versions, so compare flange and pinion with the unit you removed. Relays and radiator hoses are available too.

Steering, driveshafts and linkage

Track rods cover the steering and universal joints the driveshafts. A universal joint that feels notchy in one position needs replacing, even if it does not rattle yet. Bushes for the lower link struts and tubes complete the picture.

After replacing a track rod, the toe-in will not be right on its own. Count the turns as you unscrew the old rod, screw the new one in the same amount, and have the toe-in checked afterwards. A radiator hose that feels soft or cracked with the engine cold should go, together with its clamps.

Bushes for the lower link struts wear oval over time. If the linkage knocks when you lift an implement, check the bushes before looking at anything more expensive.

Matching parts to the 2040S

The serial number is on the type plate. Many parts on this page also carry a John Deere reference number, which you will often find on the old part as well.

Other tractors from the 40 series with their own page are the John Deere 1640, John Deere 3640, John Deere 4040, John Deere 4240 and John Deere 4440. For the brand as a whole, see John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart