Menu
EUR

John Deere 2040S tractor parts & technical data

The John Deere 2040S from the 40 series gets its own overview here, with more than 350 parts such as lighting, electrics and engine components.

371 parts found for John Deere 2040S
Show:
Universal joint 35 x 97 mm, centralised lubrication
A: 35 mm. B: 97 mm. Universal joint size: . Lubrication system: Centralised lubrication. More
A: 35 mm. B: 97 mm. Universal joint size: . Lubrication system: Centra...
€126,01 €104,14 €115,93 €95,81
You save 8%
O-ring oil pump 15,47 x 3,53 mm John Deere
Dimensions: 15.47 x 3.53 mm. More
Dimensions: 15.47 x 3.53 mm.
€5,15 €4,26
Bush balancer shafts Ø 38,2 x 41,27 x 28 mm John Deere
Ø: Ø 38,2 x 41,27 x 28 mm. More
Ø: Ø 38,2 x 41,27 x 28 mm.
€5,78 €4,77
Oil pipe oil pump John Deere Series 11-6400, SE6100-SE6400
€36,93 €30,52 €33,98 €28,08
You save 8%
Sealing ring John Deere
Crankshaft, 4-cylinder standard 38 mm piston pin John Deere 1640-2850
Notes: Please follow the instructions in the installation guide. Please complete the test instruction report contained therein, and return it to garan... More
Notes: Please follow the instructions in the installation guide. Pleas...
€1.528,91 €1.263,56 €1.456,60 €1.203,80
You save 5%
Bush for lower link shaft 25,4 x 28,3 x 35 mm John Deere 1640-3130
Dimensions: 25.4 x 28.3 x 35 mm. More
Dimensions: 25.4 x 28.3 x 35 mm.
€15,70 €12,98
Rear light right 155 x 60 x 52 mm, 12 V, hole spacing 45 mm
Nominal voltage: 12 V. Installation location: Right. Bulb: 12V10WK / R10W, 12V21WK / P21W. Bulbs included: No. Light function: Indicator light, rear l... More
Nominal voltage: 12 V. Installation location: Right. Bulb: 12V10WK / R...
€70,46 €58,23 €64,82 €53,57
You save 8%
Micro relay changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks. More
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 ...
€14,20 €11,74
Silencer horizontal John Deere 1840-2450
To fit as: John Deere 1640, 1840, 2040, 2040S, 2250, 2450 More
To fit as: John Deere 1640, 1840, 2040, 2040S, 2250, 2450
€238,93 €197,46 €219,82 €181,67
You save 8%
Tube vertical 1050 mm, inner-Ø 75 mm, exhaust Ø 75 mm John Deere
To fit as: John Deere 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630, 840, 940, 1040, 1140, 1350, 1550, 1750, 1850, 1850N More
To fit as: John Deere 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630...
€66,04 €54,58
Tube exhaust 1330 mm, Ø 75 mm John Deere 1640 - 3650
Length (mm): 1330 | Outer Ø (mm): 75 | Inner Ø (mm): 75 | Version: Length: 1330 mm Inner Ø: 75 mm Outlet Ø: 75 mm More
Length (mm): 1330 | Outer Ø (mm): 75 | Inner Ø (mm): 75 | Version: L...
€55,15 €45,58 €52,85 €43,68
You save 4%
LUK Clutch kit Ø 327 mm, flywheel 21,6 mm John Deere
LUK
Disc Ø (mm): 327 | Contents: Pressure plate 458133060210, clutch plate 458333004211 More
Disc Ø (mm): 327 | Contents: Pressure plate 458133060210, clutch plat...
€980,98 €810,73 €902,50 €745,87
You save 8%
LUK Clutch plate 321TDCA 22,3 x 25,8 mm, 15 splines John Deere
LUK
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Sin...
€496,72 €410,51 €456,98 €377,67
You save 8%
LUK Single clutch 330DGVM 1 3/4 inch, 27 splines John Deere 2130 - 3640
LUK
Flywheel dimension (mm): 21,6 | Dimensions (inches): 1 3/4"" 27 grooves More
Flywheel dimension (mm): 21,6 | Dimensions (inches): 1 3/4"" 27 groove...
€1.010,55 €835,17 €929,71 €768,35
You save 8%
Release bearing complete with sleeve Ø 49,6 mm, with ring John Deere 820 - 3350
Dimensions (mm): Ø 49.6, with ring More
Dimensions (mm): Ø 49.6, with ring
€93,94 €77,64 €86,42 €71,43
You save 8%
Alternator 14 V / 120 A, flange 56 mm, Case IH, John Deere, Steyr
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Additional information: Dust-tight, with fan, with W con... More
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (m...
€209,77 €173,36 €192,99 €159,49
You save 8%
Regulator 14 V for ring Ø 32 mm Fiat, John Deere
For slip ring Ø 32 mm, 14 V More
For slip ring Ø 32 mm, 14 V
€35,92 €29,69 €33,05 €27,31
You save 8%
HELLA Alternator 14 V / 120 A, pulley Ø 60 mm, 8 grooves, Fendt, John Deere
HELLA
Pulley Ø (mm): 60 | Nominal values (V / A): 14 / 120 | No. of grooves: 8 | Charging current (A): 120 | Nominal voltage (V): 14 | Additional informati... More
Pulley Ø (mm): 60 | Nominal values (V / A): 14 / 120 | No. of grooves...
€479,09 €395,94 €369,13 €305,06
You save 23%
Track rod 1391 mm, M24 x 1,5, 20 - 22 mm, 32 mm
A: 1391 mm. B: M24 x 1,5 mm. C: 20 - 22 mm. G: . D: M18 x 1,5 mm. E: 32 mm. More
A: 1391 mm. B: M24 x 1,5 mm. C: 20 - 22 mm. G: . D: M18 x 1,5 mm. E: 3...
€323,60 €267,44 €297,71 €246,04
You save 8%
Track rod 75 mm, M27 x 1,5, M24 x 1,5, taper 28,8 - 32,3 mm
A: 75 mm. C: M27 x 1,5 mm. D: M24 x 1,5 mm. E: 28,8 mm. F: 32,3 mm. Taper: 28,8 - 32,3 mm. More
A: 75 mm. C: M27 x 1,5 mm. D: M24 x 1,5 mm. E: 28,8 mm. F: 32,3 mm. Ta...
€69,52 €57,45 €63,96 €52,86
You save 8%
MAHLE Oil cooler 130 x 402 x 48 mm John Deere 1640-3640
MAHLE
Mesh length: 130 mm. Mesh width: 402 mm. Mesh depth: 48 mm. More
Mesh length: 130 mm. Mesh width: 402 mm. Mesh depth: 48 mm.
€803,98 €664,45 €481,53 €397,96
You save 40%
Piston ring set 3 rings Ø 106,5 mm, 2,42 mm / 2,385 mm / 3,465 mm
Thermostat Ø 54 mm, 82 °C
Cover
€12,74 €10,53
Shim rocker arm shaft Ø 20,65 x 29,46 x 0,5 mm John Deere
Dimensions: Ø 20.65 x 29.46 x 0.5 mm. More
Dimensions: Ø 20.65 x 29.46 x 0.5 mm.
€11,66 €9,64
Injection line cylinder 4 John Deere 1640-2850, 932-1052
€112,55 €93,02 €103,55 €85,58
You save 8%
Injection line cylinder 3 John Deere 1640-2850
€110,15 €91,03 €101,34 €83,75
You save 8%
Bleed screw fuel filter 8001033 John Deere 820-4850
Description: For fuel filter 8001033 (AR50041). More
Description: For fuel filter 8001033 (AR50041).
€6,41 €5,30
Filler cap hydraulic block Ø 38 mm John Deere
Dimensions: Ø: 38 mm. More
Dimensions: Ø: 38 mm.
€33,98 €28,08
Feed pump 2 bores, hole spacing 45 mm, flange 30 mm John Deere
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 30 mm. Connection thread: 10x1. Menke no.: 49517. More
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 30 mm. Con...
€35,24 €29,12 €32,42 €26,79
You save 8%
Cylinder head bolt 1/2" x 112 mm John Deere
Dimensions: 1/2" x 112 mm. More
Dimensions: 1/2" x 112 mm.
€8,91 €7,37
Electric feed pump John Deere
€41,33 €34,16 €38,02 €31,42
You save 8%
Oil pump John Deere 310-3650
Menke no.: 80754. More
Menke no.: 80754.
€119,00 €98,35 €109,48 €90,48
You save 8%
End control unit John Deere 830-3650
€378,42 €312,74 €348,15 €287,72
You save 8%
Seal kit hydraulic pump John Deere 830-3650
Menke no.: 221636. More
Menke no.: 221636.
€69,82 €57,70 €64,23 €53,09
You save 8%
Lift arm shaft 510 mm, Ø 1 1/8 inch, 28 mm John Deere 1350-2850
Dimensions: Length = 510, Ø = 1 1/8", 28 mm. Menke no.: 73807. More
Dimensions: Length = 510, Ø = 1 1/8", 28 mm. Menke no.: 73807.
€171,47 €141,71 €157,75 €130,37
You save 8%
Gasket set lifting block John Deere series 40, series 50
€60,73 €50,19 €55,87 €46,17
You save 8%
Pin 16 x 62,5 mm John Deere 940-2850
Dimensions: 16 x 62.5 mm. More
Dimensions: 16 x 62.5 mm.
€18,08 €14,94
Threaded spindle 1 1/8" UNC right-hand thread, cat. 2, B 145 mm, G 307 mm
I: 1 1/8" UNC mm. Version: Right-hand thread. A: 25,4 mm. B: 175 mm. C: 51 mm. G: 337 mm. F: 162 mm. Category: 2 / 25.4. Menke no.: 54297. More
I: 1 1/8" UNC mm. Version: Right-hand thread. A: 25,4 mm. B: 175 mm. C...
€40,29 €33,30 €37,07 €30,63
You save 8%
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€37,38 €30,89
Showing 97 - 144 of 371

John Deere 2040S parts for clutch, engine and steering

Keeping a John Deere 2040S at work means dealing with the jobs an older tractor brings: a clutch, an alternator, a weeping gasket. For this member of the John Deere 40 series, this page lists more than 350 parts from GRANIT, HELLA, LUK, MAHLE and VICTOR REINZ.

Clutch work

There are clutch plates, single clutch assemblies and internal plates, partly from LUK. Once the tractor is split, replace the clutch plate and pressure plate together. Splitting engine from gearbox is the costly part of the job, not the parts. Check the flywheel for heat spots and scoring and have it skimmed if needed, then use an alignment tool so the input shaft slides through the new plate without forcing.

Engine seals and electrics

For the engine there are gaskets, seals, O-rings and sealing rings, such as a seal for the feed pump, an O-ring for the oil pump and sealing rings for the injection nozzles. There is also a gasket for the lift housing. Always use new nozzle sealing rings, because a used one is already crushed and will not seal reliably a second time.

Alternators and starter motors come in several versions, so compare flange and pinion with the unit you removed. Relays and radiator hoses are available too.

Steering, driveshafts and linkage

Track rods cover the steering and universal joints the driveshafts. A universal joint that feels notchy in one position needs replacing, even if it does not rattle yet. Bushes for the lower link struts and tubes complete the picture.

After replacing a track rod, the toe-in will not be right on its own. Count the turns as you unscrew the old rod, screw the new one in the same amount, and have the toe-in checked afterwards. A radiator hose that feels soft or cracked with the engine cold should go, together with its clamps.

Bushes for the lower link struts wear oval over time. If the linkage knocks when you lift an implement, check the bushes before looking at anything more expensive.

Matching parts to the 2040S

The serial number is on the type plate. Many parts on this page also carry a John Deere reference number, which you will often find on the old part as well.

Other tractors from the 40 series with their own page are the John Deere 1640, John Deere 3640, John Deere 4040, John Deere 4240 and John Deere 4440. For the brand as a whole, see John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart